The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High-Performance PEDOT:PSS Flexible Thermoelectric Materials and Their Devices by Triple Post-Treatments
Abstract
Searching an effective method to enhance the thermoelectric properties of flexible organic films can significantly widen the application of flexible thermoelectric devices. Tuning the microstacking structure and oxidation level can effectively optimize the thermoelectric properties of poly(3,4-ethylenedioxithiophene):poly(styrenesulfonate) (PEDOT:PSS) organic films. Here, we adopt triple post-treatments with formamide (CH 3 NO), concentrated sulfuric acid (H 2 SO 4 ), and sodium borohydride in sequence to engineer flexible PEDOT:PSS thermoelectric films. A high power factor of 141 μWm –1 K –2 at 25 °C has been obtained for the PEDOT:PSS film. Such a high power factor stems from the high σ (1786 Scm –1 ) and S (28.1 μVK –1 ) after post-treatment with CH 3 NO, H 2 SO 4, and NaBH 4 in order. The increased carrier mobility resulting from both the selective removal of excess insulating PSS within the films and the conformation transition after CH 3 NO and H 2 SO 4 treatments is responsible for the enhancement of σ, while the subsequent NaBH 4 treatment optimize the electrical properties (σ and S ) by modulating the oxidation level. A homemade thermoelectric device has also been fabricated using the as-prepared flexible PEDOT:PSS films and had a high output power density of ∼1 μWcm –2 with human arm as a heating source. This study indicates that flexible thermoelectric devices based on cheap conducting polymers have great potential in wearable electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P. (2013) · Nature Materials · doi:10.1038/nmat3635 · Cited by 1,688
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationGueye, M. N., Carella, A., Faure-Vincent, J., Demadrille, R., & Simonato, J.-P. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100616 · Cited by 682
Wearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
Jia, Y., Jiang, Q., Sun, H., Liu, P., Hu, D., Pei, Y., Liu, W., Crispin, X., Fabiano, S., Ma, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102990 · Cited by 600
Doping Approaches for Organic Semiconductors
Scaccabarozzi, A. D., Basu, A., Aniés, F., Liu, J., Zapata-Arteaga, O., Warren, R., Firdaus, Y., Nugraha, M. I., Lin, Y., Campoy-Quiles, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00581 · Cited by 468
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Self-citation
Metadata
- Authors
- Xu, S., Hong, M., Shi, X.-L., Wang, Y., Ge, L., Bai, Y., Wang, L., Dargusch, M., Zou, J., & Chen, Z.-G.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-28
- Volume
- 31
- Issue
- 14
- Pages
- 5238-5244
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2955698189
- Cited by
- 222
- References
- 1
- FWCI
- 10.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-Performance PEDOT:PSS Flexible Thermoelectric Materials and Their Devices by Triple Post-Treatments. https://app.cochat.ai/papers/10.1021/acs.chemmater.9b01500
- The paper
- Xu, S., Hong, M., Shi, X.-L., Wang, Y., Ge, L., Bai, Y., Wang, L., Dargusch, M., Zou, J., & Chen, Z.-G. (2019). High-Performance PEDOT:PSS Flexible Thermoelectric Materials and Their Devices by Triple Post-Treatments. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.9b01500
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.