The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Emerging Chalcogenide Thin Films for Solar Energy Harvesting Devices
Abstract
Chalcogenide semiconductors offer excellent optoelectronic properties for their use in solar cells, exemplified by the commercialization of Cu(In,Ga)Se 2 - and CdTe-based photovoltaic technologies. Recently, several other chalcogenides have emerged as promising photoabsorbers for energy harvesting through the conversion of solar energy to electricity and fuels. The goal of this review is to summarize the development of emerging binary (Sb 2 X 3, GeX, SnX), ternary (Cu 2 SnX 3, Cu 2 GeX 3, CuSbX 2, AgBiX 2 ), and quaternary (Cu 2 ZnSnX 4, Ag 2 ZnSnX 4, Cu 2 CdSnX 4, Cu 2 ZnGeX 4, Cu 2 BaSnX 4 ) chalcogenides (X denotes S/Se), focusing especially on the comparative analysis of their optoelectronic performance metrics, electronic band structure, and point defect characteristics. The performance limiting factors of these photoabsorbers are discussed, together with suggestions for further improvement. Several relatively unexplored classes of chalcogenide compounds (such as chalcogenide perovskites, bichalcogenides, etc.) are highlighted, based on promising early reports on their optoelectronic properties. Finally, pathways for practical applications of emerging chalcogenides in solar energy harvesting are discussed against the backdrop of a market dominated by Si-based solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Cited by
Pham, P. V., Bodepudi, S. C., Shehzad, K., Liu, Y., Xu, Y., Yu, B., & Duan, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00735 · Cited by 708
Phase Change Thermal Storage Materials for Interdisciplinary Applications
Wang, G., Tang, Z., Gao, Y., Liu, P., Li, Y., Li, A., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00572 · Cited by 550
Metadata
- Authors
- Hadke, S., Huang, M., Chen, C., Tay, Y. F., Chen, S., Tang, J., & Wong, L.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-12-08
- Volume
- 122
- Issue
- 11
- Pages
- 10170-10265
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4200173833
- Cited by
- 230
- References
- 2
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.