The DOI matches its Crossref record; 234 of the 234 references it cites were found in a registry or an index.
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Abstract
(M = Co, Ni, Mn, etc.) have been widely adopted as the cathodes of Li-ion batteries for portable electronics, electric vehicles, and energy storage. Oxygen loss in the layered oxides is one of the major factors leading to cycling-induced structural degradation and its associated fade in electrochemical performance. Herein, we review recent progress in understanding the phenomena of oxygen loss and the resulting structural degradation in layered oxide cathodes. We first present the major driving forces leading to the oxygen loss and then describe the associated structural degradation resulting from the oxygen loss. We follow this analysis with a discussion of the kinetic pathways that enable oxygen loss, and then we address the resulting electrochemical fade. Finally, we review the possible approaches toward mitigating oxygen loss and the associated electrochemical fade as well as detail novel analytical methods for probing the oxygen loss.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–234 of 234
Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test
Doh, C., Kim, D.-H., Kim, H.-S., Shin, H.-M., Jeong, Y., Moon, S., Jin, B., Eom, S.-W., Kim, H., Kim, K.-W., et al. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.102 · Cited by 104
Serial sectioning methods for 3D investigations in materials science
Zankel, A., Wagner, J., & Poelt, P. (2014) · Micron · doi:10.1016/j.micron.2014.03.002 · Cited by 97
Amine, K., Chen, Z., Zhang, Z., Liu, J., Lu, W., Qin, Y. F., Lu, J. B., Curtis, L., & Sun, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11584g · Cited by 96
Zhu, Y., Casselman, M. D., Li, Y., Wei, A., & Abraham, D. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.07.070 · Cited by 95
Wagner, R., Brox, S., Kasnatscheew, J., Gallus, D. R., Amereller, M., Cekić-Lasković, I., & Winter, M. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.004 · Cited by 93
Faenza, N. V., Lebens-Higgins, Z. W., Mukherjee, P., Sallis, S., Pereira, N., Badway, F., Halajko, A., Ceder, G., Cosandey, F., Piper, L. F. J., et al. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b00863 · Cited by 93
Self-citationXu, Y., Wu, H., Jia, H., Zhang, J., Xu, W., & Wang, C. (2020) · ACS Nano · doi:10.1021/acsnano.0c03344 · Cited by 93
Modeling and analysis of thermal runaway in Li-ion cell
An, Z., Shah, K., Jia, L., & Ma, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113960 · Cited by 92
Yang, C., Shao, R., Wang, Q., Zhou, T., Lü, J., Jiang, N., Gao, P. D., Liu, W., Yu, Y., & Zhou, H. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.11.016 · Cited by 89
Synthesis of LiNiO2 at Moderate Oxygen Pressure and Long-Term Cyclability in Lithium-Ion Full Cells
Mesnier, A., & Manthiram, A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c16648 · Cited by 88
Lithium Ion Battery Fire And Explosion
Wang, Q., Sun, J., & Chu, G. (2005) · Fire Safety Science · doi:10.3801/iafss.fss.8-375 · Cited by 83
Liu, Z., Cronin, J. S., Chen‐Wiegart, Y. K., Wilson, J. R., Yakal-Kremski, K., Wang, J., Faber, K. T., & Barnett, S. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.043 · Cited by 82
Hoang, K. (2015) · Physical Review Applied · doi:10.1103/physrevapplied.3.024013 · Cited by 81
Berkes, B. B., Jozwiuk, A., Sommer, H., Brezesinski, T., & Janek, J. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.08.002 · Cited by 80
Liu, H., Kazemiabnavi, S., Grenier, A., Vaughan, G., Michiel, M. D., Polzin, B. J., Thornton, K. S., Chapman, K. W., & Chupas, P. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02173 · Cited by 77
Self-citationKasnatscheew, J., Evertz, M., Streipert, B., Wagner, R., Nowak, S., Cekić-Lasković, I., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.092 · Cited by 76
Mixed Electronic and Ionic Conductor-Coated Cathode Material for High-Voltage Lithium Ion Battery
Shim, J., Han, J., Lee, J., & Lee, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03113 · Cited by 67
In situ study on CO2 evolution at lithium-ion battery cathodes
Vetter, J., Holzapfel, M., Wuersig, A., Scheifele, W., Ufheil, J., & Novák, P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.087 · Cited by 64
A multiphysics microstructure-resolved model for silicon anode lithium-ion batteries
Wang, M., Xiao, X., & Huang, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.037 · Cited by 60
Mohanty, D., Li, J., Nagpure, S. C., Wood, D. L., & Daniel, C. (2015) · MRS Energy & Sustainability · doi:10.1557/mre.2015.16 · Cited by 53
Oxygen Vacancy Diffusion and Condensation in Lithium‐Ion Battery Cathode Materials
Lee, S., Jin, W., Kim, S. H., et al. (2019) · Angewandte Chemie · doi:10.1002/ange.201904469 · Cited by 53
Surface Chemistry Dependence on Aluminum Doping in Ni-rich LiNi0.8Co0.2−yAlyO2 Cathodes
Lebens-Higgins, Z. W., Halat, D. M., Faenza, N. V., Wahila, M. J., Mascheck, M., Wiell, T., Eriksson, S. K., Palmgren, P., Rodriguez, J., Badway, F., et al. (2019) · Scientific Reports · doi:10.1038/s41598-019-53932-6 · Cited by 52
Self-citationStudy on the reversible capacity loss of layered oxide cathode during low-temperature operation
Li, Y., Qian, K., He, Y., Kaneti, Y. V., Liu, D., Luo, D., Li, H., Li, B., & Kang, F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.033 · Cited by 48
Cheng, J., Sivonxay, E., & Persson, K. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10000 · Cited by 47
Frenkel‐Defect‐Mediated Chemical Ordering Transition in a Li–Mn–Ni Spinel Oxide
Ryoo, H., Bae, H. B., Kim, Y., Kim, J., Lee, S., & Chung, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201502320 · Cited by 44
Parent, L. R., Gnanasekaran, K., Korpanty, J., & Gianneschi, N. C. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00595 · Cited by 42
Ghatak, K., Basu, S., Das, T., Sharma, V., Kumar, H., & Datta, D. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp03237h · Cited by 38
Xu, Y., Wu, H., Jia, H., Engelhard, M., Zhang, J., Xu, W., & Wang, C. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105040 · Cited by 34
Li-ion battery ageing model parameter: SEI layer analysis using magnetic field probing
Singh, P., Khare, N., & Chaturvedi, P. K. (2018) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2018.01.007 · Cited by 33
Shan, W., Huang, S., Zhang, H., & Hou, X. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158022 · Cited by 33
Self-citationFeng, X., Shen, Q., Shi, Y., & Zhang, J. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.112 · Cited by 32
Effect of Chemical Bonding Characteristics on Ordering Structure in Li Spinel Oxides
Ryoo, H., Lee, S., Kim, J., & Chung, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805972 · Cited by 19
McEnaney, J. M., Rohr, B. A., Nielander, A. C., Singh, A. R., King, L. A., Nørskov, J. K., & Jaramillo, T. F. (2020) · Sustainable Energy & Fuels · doi:10.1039/c9se00799g · Cited by 12
Poozhikunnath, A., Favata, J., Ahmadi, B., Xiong, J., Bonville, L. J., Shahbazmohamadi, S., Janković, J., & Marić, R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0761914jes · Cited by 7
Cited by
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
The significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
Self-citation
Metadata
- Authors
- Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-01-13
- Volume
- 122
- Issue
- 6
- Pages
- 5641-5681
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4206522497
- Cited by
- 338
- References
- 234
- FWCI
- 3.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.