Impact of Potassium and Phosphorus in Biomass on the Properties of Fast Pyrolysis Bio-oil
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This study investigates fast pyrolysis bio-oils produced from alkali-metal-impregnated biomass (beech wood). The impregnation aim is to study the catalytic cracking of the pyrolysis vapors as a result of potassium or phosphorus. It is recognized that potassium and phosphorus in biomass can have a major impact on the thermal conversion processes. When biomass is pyrolyzed in the presence of alkali metal cations, catalytic cracking of the pyrolysis liquids occurs in the vapor phase, reducing the organic liquids produced and increasing yields of water, char, and gas, resulting in a bio-oil that has a lower calorific value and an increased chance of phase separation. Beech wood was impregnated with potassium or phosphorus (K impregnation and P impregnation, respectively) in the range of 0.10–2.00 wt %. Analytical pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS) was used to examine the pyrolysis products during thermal degradation, and thermogravimetric analysis (TGA) was used to examine the distribution of char and volatiles. Both potassium and phosphorus are seen to catalyze the pyrolytic decomposition of biomass and modify the yields of products. 3-Furaldehyde and levoglucosenone become more dominant products upon P impregnation, pointing to rearrangement and dehydration routes during the pyrolysis process. Potassium has a significant influence on cellulose and hemicellulose decomposition, not just on the formation of levoglucosan but also other species, such as 2(5 H )-furanone or hydroxymethyl-cyclopentene derivatives. Fast pyrolysis processing has also been undertaken using a laboratory-scale continuously fed bubbling fluidized-bed reactor with a nominal capacity of 1 kg h –1 at the reaction temperature of 525 °C. An increase in the viscosity of the bio-oil during the stability assessment tests was observed with an increasing percentage of impregnation for both additives. This is because bio-oil undergoes polymerization while placed in storage as a result of the inorganic content. The majority of inorganics are concentrated in the char, but small amounts are entrained in the pyrolysis vapors and, therefore, end up in the bio-oil.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Self-citationPrediction of heating values of biomass fuel from elemental composition
Friedl, A., Padouvas, E., Rotter, H., & Varmuza, K. (2005) · Analytica Chimica Acta · doi:10.1016/j.aca.2005.01.041 · Cited by 819
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
A comparative kinetic study on the pyrolysis of three different wood species
Müller-Hagedorn, M., Bockhorn, H., Krebs, L., & Müller, U. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(03)00065-2 · Cited by 337 · cited 1×
“Biomass ash contains alkali metals which are known to catalyse cracking reactions of fast pyrolysis vapours and have a significant effect on fast pyrolysis product distribution including chemical composition of bio-oil [2-14].”
Background
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Catalytic effects of potassium on biomass pyrolysis, combustion and torrefaction
Safar, M., Lin, B.-J., Chen, W.-H., Langauer, D., Chang, J.-S., Raclavska, H., Pétrissans, A., Rousset, P., & Pétrissans, M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.10.065 · Cited by 273
Ranzi, E., Debiagi, P. E. A., & Frassoldati, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03096 · Cited by 261
Characterizing variability in lignocellulosic biomass: a review
Yan, J., Oyedeji, O., Leal, J. H., Donohoe, B. S., Semelsberger, T. A., Li, C., Hoover, A. N., Webb, E., Bose, E. A., Zeng, Y., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06263 · Cited by 134
Metadata
- Authors
- Banks, S. W., Nowakowski, D. J., & Bridgwater, A. V.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-05
- Volume
- 30
- Issue
- 10
- Pages
- 8009-8018
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2463696692
- Cited by
- 89
- References
- 5
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of Potassium and Phosphorus in Biomass on the Properties of Fast Pyrolysis Bio-oil. https://app.cochat.ai/papers/10.1021/acs.energyfuels.6b01044
- The paper
- Banks, S. W., Nowakowski, D. J., & Bridgwater, A. V. (2016). Impact of Potassium and Phosphorus in Biomass on the Properties of Fast Pyrolysis Bio-oil. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6b01044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.