Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Hierarchical porous ZSM-5 (HP-ZSM-5) was constructed using organosilanes as the growth inhibitors for CO 2 capture. The properties of adsorbents were characterized by X-ray diffraction, N 2 adsorption/desorption, scanning electron microscopy, temperature-programmed desorption of carbon dioxide, and 27 Al magic angle spinning nuclear magnetic resonance. It was found that HP-ZSM-5 samples synthesized by organosilanes had a significant effect on the microstructure and morphology. CO 2 adsorption capacity of HP-ZSM-5 was up to 58.26 cm 3 g –1 at 0 °C and 1 bar, significantly higher than that of the ZSM-5 sample. The effective improvement of CO 2 adsorption performance mainly originated from the micro-/mesoporous composite structure and complex surface morphology, which can provide low-resistant pathways for CO 2 through the porous network. Besides, in situ Fourier transform infrared spectroscopy was carried out to study the adsorption process on adsorbents, and the results indicated that a faster physical adsorption process was achieved as a result of the introduction of mesopores.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered porous materials for emerging applications
Davis, M. E. (2002) · Nature · doi:10.1038/nature00785 · Cited by 5,308
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Hierarchical porous polyacrylonitrile-based activated carbon fibers for CO2 capture
Shen, W., Zhang, S., He, Y., Li, J., & Fan, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12585k · Cited by 154
Cited by
Hierarchically Structured Zeolites: From Design to Application
Chen, L.-H., Sun, M.-H., Wang, Z., Yang, W., Xie, Z., & Su, B.-L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00016 · Cited by 724
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Kerstens, D., Smeyers, B., Van Waeyenberg, J., Zhang, Q., Yu, J., & Sels, B. F. (2020) · Advanced Materials · doi:10.1002/adma.202004690 · Cited by 317
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
Metadata
- Authors
- Liu, Q., He, P., Qian, X., Fei, Z., Zhang, Z., Chen, X., Tang, J., Cui, M., Qiao, X., & Shi, Y.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-17
- Volume
- 31
- Issue
- 12
- Pages
- 13933-13941
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2767779382
- Cited by
- 110
- References
- 4
- FWCI
- 6.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite. https://app.cochat.ai/papers/10.1021/acs.energyfuels.7b02543
- The paper
- Liu, Q., He, P., Qian, X., Fei, Z., Zhang, Z., Chen, X., Tang, J., Cui, M., Qiao, X., & Shi, Y. (2017). Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.7b02543
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.