Prediction of Hydrothermal Carbonization with Respect to the Biomass Components and Severity Factor
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
In recent years, hydrothermal carbonization (HTC) has been introduced as an attractive method for converting biomass into value-added products. The complex reaction chemistry and variable composition of biomass have, however, been barriers to find general equations for describing the HTC process. The goal of this study is to establish a link between the composition of biomass and the expected hydrochar from HTC. Based on the experimental design found from response surface methodology, the biomass components, namely pure cellulose, hemicellulose, and lignin, were submitted in different combinations into 39 HTC experiments with severity factors (SFs) of 3.83, 5.01, and 6.19. Using the experimental data, an attempt was then made to predict the mass yield, higher heating value (HHV), carbon content (C%), and energy recovery factor of the hydrochars according to the biomass composition and the process severity. The results revealed that the interactions between the biomass components do not have a major effect on the hydrochar characteristics, whereas the interaction between cellulose and SF is the most significant. Moreover, it was shown that, after the lignin content, the hemicellulose content has the highest positive impact on HHV and C% of the hydrochar. An optimization study showed that, with a focus on minimizing the SF while the HHV is maximized, biomass with a cellulose content of 40%, hemicellulose of 35%, and lignin of 25%, under the severity of 4.41 will be the most suitable case for HTC treatment. Finally, a comparison between the predictions and the experimental data in the literature suggests that the proposed equations can provide a good evaluation on the HTC of several biomass feedstocks, especially when the amount of ash and extractives are low.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The authors tested the model also on 10 different biomasses, demonstrating that it is reliable at low ash and extractives content.”
From Hydrothermal Carbonization of Organic Waste and Biomass: A Review on Process, Reactor, and Plant Modeling (2021) · cites this paper as [80]
In the citing paper
“The design of experiment-response surface methodology (DoE-RSM) is a statistical approach used to investigate the interaction between independent and response variables of a process. The concept implies the usage of a set of designed experiments to obtain an optimal response (the output) [80].”
From Hydrothermal Carbonization of Organic Waste and Biomass: A Review on Process, Reactor, and Plant Modeling (2021) · cites this paper as [80]
In the citing paper
“Results show that the optimal point for the mixture in terms of solid yield and HHV (corresponding to 67% and 25MJkg -1 , respectively) is achieved at a severity factor of 4.5.”
From Hydrothermal Carbonization of Organic Waste and Biomass: A Review on Process, Reactor, and Plant Modeling (2021) · cites this paper as [80]
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Libra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Self-citationKang, S., Li, X., Fan, J., & Chang, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300565d · Cited by 728
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Heidari, M., Dutta, A., Acharya, B., & Mahmud, S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.12.003 · Cited by 464
Self-citationFrom first generation biofuels to advanced solar biofuels
Aro, E.-M. (2016) · AMBIO · doi:10.1007/s13280-015-0730-0 · Cited by 369
Biochar’s role as an alternative N-fertilizer: Ammonia capture
Spokas, K. A., Novak, J. M., & Venterea, R. T. (2012) · Plant and Soil · doi:10.1007/s11104-011-0930-8 · Cited by 326
Chen, W.-H., & Kuo, P.-C. (2011) · Energy · doi:10.1016/j.energy.2011.09.022 · Cited by 311
Demirbas, A. (2002) · Energy Exploration & Exploitation · doi:10.1260/014459802760170420 · Cited by 280
Couhert, C., Commandre, J.-M., & Salvador, S. (2009) · Fuel · doi:10.1016/j.fuel.2008.09.019 · Cited by 277
Abatzoglou, N., Chornet, E., Belkacemi, K., & Overend, R. P. (1992) · Chemical Engineering Science · doi:10.1016/0009-2509(92)80235-5 · Cited by 274
Kim, D., Lee, K., & Park, K. Y. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.07.037 · Cited by 261
Acetic acid and lithium chloride effects on hydrothermal carbonization of lignocellulosic biomass
Lynam, J. G., Coronella, C. J., Yan, W., Reza, M. T., & Vasquez, V. R. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.02.035 · Cited by 260
Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks
Hoekman, S. K., Broch, A., Robbins, C., Zielinska, B., & Felix, L. (2013) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-012-0066-y · Cited by 246
Chen, W.-H., Ye, S.-C., & Sheen, H.-K. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.101 · Cited by 238
Habib, S. S. (2009) · Applied Mathematical Modelling · doi:10.1016/j.apm.2009.03.021 · Cited by 227
Reaction kinetics of hydrothermal carbonization of loblolly pine
Reza, M. T., Yan, W., Uddin, M. H., Lynam, J. G., Hoekman, S. K., Coronella, C. J., & Vásquez, V. R. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.04.028 · Cited by 200
Review on comparative study of dry and wet torrefaction
Acharya, B., Dutta, A., & Minaret, J. (2015) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2015.08.003 · Cited by 194
Self-citationProcess Water from the Hydrothermal Carbonization of Biomass: A Waste or a Valuable Product?
Kambo, H. S., Minaret, J., & Dutta, A. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-017-9914-0 · Cited by 175
Self-citationModeling Study of Woody Biomass: Interactions of Cellulose, Hemicellulose, and Lignin
Zhang, X., Yang, W., & Blasiak, W. (2011) · Energy & Fuels · doi:10.1021/ef201097d · Cited by 148
Safari, F., Javani, N., & Yumurtacı, Z. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.05.102 · Cited by 148
Nakason, K., Panyapinyopol, B., Kanokkantapong, V., Viriya-empikul, N., Kraithong, W., & Pavasant, P. (2018) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.05.002 · Cited by 137
Hydrothermal Carbonization of Fruit Wastes: A Promising Technique for Generating Hydrochar
Zhang, B., Heidari, M., Regmi, B., Salaudeen, S., Arku, P., Thimmannagari, M., & Dutta, A. (2018) · Energies · doi:10.3390/en11082022 · Cited by 131
Self-citationCharacteristics of hydrochar and liquid fraction from hydrothermal carbonization of cassava rhizome
Nakason, K., Panyapinyopol, B., Kanokkantapong, V., Viriya‐empikul, N., Kraithong, W., & Pavasant, P. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.01.002 · Cited by 123
Ibbett, R., Gaddipati, S., Davies, S., Hill, S., & Tucker, G. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.044 · Cited by 122
Cellulose-Lignin interactions during slow and fast pyrolysis
Hilbers, T. J., Wang, Z., Pecha, M. B., Westerhof, R. J. M., Kersten, S. R. A., Peláez-Samaniego, M. R., & Garcìa-Pèrez, M. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.05.020 · Cited by 117
Safari, F., Norouzi, O., & Tavasoli, A. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.09.082 · Cited by 115
Self-citationHydrothermal carbonization (HTC) of loblolly pine using a continuous, reactive twin-screw extruder
Hoekman, S. K., Broch, A., Felix, L., & Farthing, W. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.035 · Cited by 109
Comparison of liquid and vapor hydrothermal carbonization of corn husk for the use as a solid fuel
Minaret, J., & Dutta, A. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.11.010 · Cited by 97
Self-citationModelling the reactions of cellulose, hemicellulose and lignin submitted to hydrothermal treatment
Borrero-López, A. M., Masson, E., Celzard, A., & Fierro, V. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.08.045 · Cited by 97
Darmawan, S., Wistara, N. J., Pari, G., Maddu, A., & Syafii, W. (2016) · BioResources · doi:10.15376/biores.11.2.3561-3574 · Cited by 88
Effects of Process Water Recycling and Particle Sizes on Hydrothermal Carbonization of Biomass
Heidari, M., Salaudeen, S., Dutta, A., & Acharya, B. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02684 · Cited by 84
Self-citationHydrothermal Carbonization of Lignocellulosic Biomass
Coronella, C. J., Lynam, J. G., Reza, M. T., & Uddin, M. H. (2014) · Green chemistry and sustainable technology · doi:10.1007/978-3-642-54458-3_12 · Cited by 80
Mumme, J., Titirici, M.-M., Pfeiffer, A., Lüder, U., Reza, M. T., & Mašek, O. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00943 · Cited by 77
Analysis of the behaviour of pollutant gas emissions during wheat straw/coal cofiring by TG–FTIR
Wang, C., Wu, Y., Liu, Q., Yang, H., & Wang, F. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.12.029 · Cited by 73
Bartocci, P., Barbanera, M., D’Amico, M., Laranci, P., Cavalaglio, G., Gelosia, M., Ingles, D., Bidini, G., Buratti, C., Cotana, F., et al. (2016) · Waste Management · doi:10.1016/j.wasman.2016.08.035 · Cited by 46
Hydrothermal Carbonization of Corncob and Characterization of the Obtained Hydrochar
Arellano, O., Flores, M., Guerra, J., Hidalgo, A., Rojas, D., & Strubinger, A. (2016) · Chemical engineering transactions · doi:10.3303/cet1650040 · Cited by 43
Energy Densification of Lignocellulosic Biomass via Hydrothermal Carbonization and Torrefaction
Kambo, H. S. (2014) · The Atrium (University of Guelph) · Cited by 42
Qadi, N. M. N., Takeno, K., Mosqueda, A., Kobayashi, M., Motoyama, Y., & Yoshikawa, K. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00994 · Cited by 40
Şimşir, H., ELTUĞRAL, N., & Karagöz, S. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b01750 · Cited by 32
Yaghmaei, M., Norouzi, O., Jafarian, S., Khosh, A. G., & Tavasoli, A. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.10.017 · Cited by 31
Self-citationEffect of Time and Temperature on the Cracking of Oils
Genlesse, J. C., & Reuter, R. (1930) · Industrial & Engineering Chemistry · doi:10.1021/ie50252a008 · Cited by 21
Safari, F., Tavasoli, A., & Ataei, A. (2016) · International Journal of Industrial Chemistry · doi:10.1007/s40090-016-0093-9 · Cited by 18
Cited by
Güleç, F., Riesco, L. M. G., Williams, O. S. A., Kostas, E. T., Samson, A., & Lester, E. H. (2021) · Fuel · doi:10.1016/j.fuel.2021.121166 · Cited by 379
“Hydrothermal carbonization (HTC, 180 – 250 ◦ C, 15 – 40 bar) is a thermochemical process for the pre-treatment of high moisture content biomass to make it viable in for energy production [17,21,22].”
Hydrothermal Carbonization as a Valuable Tool for Energy and Environmental Applications: A Review
Maniscalco, M. P., Volpe, M., & Messineo, A. (2020) · Energies · doi:10.3390/en13164098 · Cited by 226
“[37] found almost negligible interactions between lignin, cellulose and hemicellulose on the final hydrochar properties, while cellulose was mostly affected by reaction severity.”
BackgroundIschia, G., & Fiori, L. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01255-3 · Cited by 234
Sharma, H. B., & Dubey, B. K. (2020) · Waste Management · doi:10.1016/j.wasman.2020.09.009 · Cited by 162
Reactivity of cellulose during hydrothermal carbonization of lignocellulosic biomass
Volpe, M., Messineo, A., Mäkelä, M., Barr, M. R., Volpe, R., Corrado, C., & Fiori, L. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106456 · Cited by 145
Metadata
- Authors
- Heidari, M., Norouzi, O., Salaudeen, S., Acharya, B., & Dutta, A.
- Affiliations
- University of Guelph (CA)
- University of Prince Edward Island (CA)
- Corresponding author
- Dutta, Animesh
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-08-30
- Volume
- 33
- Issue
- 10
- Pages
- 9916-9924
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2971066641
- Cited by
- 63
- References
- 44
- Citations by year
- 2026: 8 · 2025: 6 · 2024: 4 · 2023: 8 · 2022: 8 · 2021: 12 · 2020: 17
- FWCI
- 3.26
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Energy & Fuels (publishedVersion)
- IslandScholar (University of Prince Edward Island) (submittedVersion)
- Funders
- Environment and Climate Change Canada (053191)
- Ontario Ministry of Agriculture, Food and Rural Affairs (030333)
- Natural Sciences and Engineering Research Council of Canada (400495)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Energy › Fuel Technology › Mining and Gasification Technologies
- Keywords
- hydrothermal carbonization, hydrochar, biomass composition, severity factor, cellulose, hemicellulose, lignin, higher heating value, carbon content, mass yield, process optimization, biomass pretreatment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.