Replacing Plastics with Alternatives Is Worse for Greenhouse Gas Emissions in Most Cases
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Plastics are controversial due to their production from fossil fuels, emissions during production and disposal, potential toxicity, and leakage to the environment. In light of these concerns, calls to use less plastic products and move toward nonplastic alternatives are common. However, these calls often overlook the environmental impacts of alternative materials. This article examines the greenhouse gas (GHG) emission impact of plastic products versus their alternatives. We assess 16 applications where plastics are used across five key sectors: packaging, building and construction, automotive, textiles, and consumer durables. These sectors account for about 90% of the global plastic volume. Our results show that in 15 of the 16 applications a plastic product incurs fewer GHG emissions than their alternatives. In these applications, plastic products release 10% to 90% fewer emissions across the product life cycle. Furthermore, in some applications, such as food packaging, no suitable alternatives to plastics exist. These results demonstrate that care must be taken when formulating policies or interventions to reduce plastic use so that we do not inadvertently drive a shift to nonplastic alternatives with higher GHG emissions. For most plastic products, increasing the efficiency of plastic use, extending the lifetime, boosting recycling rates, and improving waste collection would be more effective for reducing emissions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures




Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Yet, plastics result in lower greenhouse gas emissions throughout their life cycle compared to alternative materials like metals or glass 40 .”
From Complexities of the global plastics supply chain revealed in a trade-linked material flow analysis (2025) · cites this paper as [40]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Evaluating scenarios toward zero plastic pollution
Lau, W. W. Y., Shiran, Y., Bailey, R. M., Cook, E., Stuchtey, M. R., Koskella, J., Velis, C. A., Godfrey, L., Boucher, J., Murphy, M. B., et al. (2020) · Science · doi:10.1126/science.aba9475 · Cited by 1,766
Outside the Safe Operating Space of the Planetary Boundary for Novel Entities
Persson, L., Carney Almroth, B. M., Collins, C. D., Cornell, S., de Wit, C. A., Diamond, M. L., Fantke, P., Hassellöv, M., MacLeod, M., Ryberg, M. W., et al. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.1c04158 · Cited by 1,347
Jeswani, H., Krüger, C., Russ, M., Horlacher, M., Antony, F., Hann, S., & Azapagic, A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144483 · Cited by 625
Plastic futures and their CO2 emissions
Stegmann, P., Daioglou, V., Londo, M., van Vuuren, D. P., & Junginger, M. (2022) · Nature · doi:10.1038/s41586-022-05422-5 · Cited by 572
Towards circular plastics within planetary boundaries
Bachmann, M., Zibunas, C., Hartmann, J., Tulus, V., Suh, S., Guillén-Gosálbez, G., & Bardow, A. (2023) · Nature Sustainability · doi:10.1038/s41893-022-01054-9 · Cited by 394
Global Plastics Outlook: Policy Scenarios to 2060
OECD (2022) · OECD eBooks · doi:10.1787/aa1edf33-en · Cited by 293
LCA benchmarking study on textiles made of cotton, polyester, nylon, acryl, or elastane
van der Velden, N. M., Patel, M. K., & Vogtländer, J. G. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0626-9 · Cited by 265
Life-cycle assessment to guide solutions for the triple planetary crisis
Hellweg, S., Benetto, E., Huijbregts, M. A. J., Verones, F., & Wood, R. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-023-00449-2 · Cited by 241
Research works printed but not linked: 4
- Historic day in the campaign to beat plastic pollution: Nations commit to develop a legally binding agreement. UN Environment Programme. http://www.unep.org/news-and-stories/press-release/historic-day-campaign-beat-plastic-pollution-nations-commit-develop (accessed 2023–03–13).
- 2022, US Energy Information Administration
- 2009, PET Resin Association
- Environmental Footprint and Material Efficiency Support for Product Policy: Report on Benefits and Impacts/Costs of Options for Different Potential Material Efficiency Requirements for Dishwashers, 2015. European Comission. https://data.europa.eu/doi/10.2788/720546 (accessed 2022–10–18). · doi:10.2788/720546
Cited by
Complexities of the global plastics supply chain revealed in a trade-linked material flow analysis
Houssini, K., Li, J., & Tan, Q. (2025) · Communications Earth & Environment · doi:10.1038/s43247-025-02169-5 · Cited by 363
“Yet, plastics result in lower greenhouse gas emissions throughout their life cycle compared to alternative materials like metals or glass 40 .”
Pathways to a sustainable future: Exploring the synergy between sustainability and circular economy
Eelager, M. P., Dalbanjan, N. P., Madihalli, S., Madar, M., Agadi, N. P., Korganokar, K., & Kiran, B. K. (2025) · Sustainable Futures · doi:10.1016/j.sftr.2025.101208 · Cited by 77
Biopolymer based composite packaging: A sustainable approach for fruits and vegetables preservation
Prasad, J., Kumar, N., Pratibha, Jaiswal, R., Yadav, A., Sharma, S. P., Fawole, O. A., & Kaushik, N. (2025) · Applied Food Research · doi:10.1016/j.afres.2025.101211 · Cited by 35
From concept to shelf: engineering biopolymer-based food packaging for sustainability
Sharma, C., Kundu, S., Singh, S., Saxena, J., Gautam, S., Kumar, A., & Pathak, P. (2025) · RSC Sustainability · doi:10.1039/d5su00483g · Cited by 43
The Factors Influencing the Recycling of Plastic and Composite Packaging Waste
Torkelis, A., Dvarionienė, J., & Денафас, Г. (2024) · Sustainability · doi:10.3390/su16219515 · Cited by 49
Climate Impact of Primary Plastic Production
Karalı, N., Khanna, N., & Shah, N. (2024) · Lawrence Berkeley National Laboratory · doi:10.2172/2336721 · Cited by 33
Polyethylene packaging and alternative materials in the United States: A life cycle assessment
Avery, E., Nduagu, E. I., Vozzola, E., ROUX, T. W., & Auras, R. A. (2025) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.178359 · Cited by 32
Sarkhel, S., Kaur, S., Das, R., Sharma, A., Kheto, A., Saha, D., & Kumar, Y. (2025) · Sustainable Food Technology · doi:10.1039/d5fb00689a · Cited by 44
Carbon Recycling of High Value Bioplastics: A Route to a Zero-Waste Future
Keith, M. J., Koller, M., & Lackner, M. K. (2024) · Polymers · doi:10.3390/polym16121621 · Cited by 35
“Indeed, recent research has shown that replacing plastics with alternative materials, such as paper or glass, often resulted in higher greenhouse gas (GHG) emissions [6].”
BackgroundMahadas, N. A., Suhail, A., Sobczak, M. T., Li, X., Chen, K., Song, K., Dong, G., Kuksenok, O., & Tang, C. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00176 · Cited by 27
Baniasadi, H., Äkräs, L., Paganelli, Z., Dammann, N., Abidnejad, R., Lipponen, S., Silvenius, F., Vahvaselkä, M., Ilvesniemi, H., Seppälä, J. V., et al. (2025) · Environmental Research · doi:10.1016/j.envres.2025.121446 · Cited by 26
Kelly, F. J., Wright, S., Woodward, G., & Fussell, J. C. (2025) · Frontiers in Science · doi:10.3389/fsci.2025.1636665 · Cited by 28
Advancing the circular economy of healthcare plastics: A systematic literature review
Cano, N. S. D. S. L., Marino, M., Brooks, A. L., Eckelman, M. J., & Bilec, M. M. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108317 · Cited by 34
Mapping Plastic and Plastic Additive Cycles in Coastal Countries: A Norwegian Case Study
Marhoon, A., Hernández, M. L. H., Billy, R. G., Müller, D. B., & Verones, F. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.3c09176 · Cited by 19
“96 Plastic alternatives have shown higher environmental impacts in comparison to plastics, 97,98 but these assessments neglected various end-of-life plastic-associated impacts, such as entanglement, 99 toxic effects from additives, 100 or microplastic physical impacts.”
Climate Impact of Primary Plastic Production
Karalı, N., Khanna, N., & Shah, N. (2024) · Lawrence Berkeley National Laboratory · doi:10.2172/2336722 · Cited by 26
Ren, Y., Zhu, H., Jiang, M., Cao, Y., Li, C., Yu, Y., Chen, D., Xu, M., Guo, B., & Zhu, B. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c01174 · Cited by 17
Kek, H. Y., Tan, H., Othman, M. H. D., Lee, C. T., Ahmad, F. B. J., Ismail, N. D., Nyakuma, B. B., Lee, K. Q., & Wong, K. Y. (2024) · Environmental Research · doi:10.1016/j.envres.2024.118928 · Cited by 20
Life cycle assessment of polyethylene packaging and alternatives on the European market
Tacker, M., HAFNER-KUHN, T., GSTÖHL, A., Nduagu, E. I., Vozzola, E., ROUX, T. W., & Auras, R. A. (2025) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2025.100270 · Cited by 30
Polymer composites with carbon nanotubes made from CO 2
Licht, G., Hofstetter, K., & Licht, S. L. (2024) · RSC Sustainability · doi:10.1039/d4su00234b · Cited by 15
Dong, L., Dong, C., Zhi, W., Zhang, P., Li, W., & Gu, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154502 · Cited by 14
Global Plastic Industry Transition Addressing Key Drivers of the Triple Planetary Crisis
Huo, J., Wang, Z., Oberschelp, C., & Hellweg, S. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c08703 · Cited by 15
The role of biodegradable plastics in the global plastic future
Piao, Z., & Yao, Y. (2026) · Nature Reviews Clean Technology · doi:10.1038/s44359-025-00142-1 · Cited by 20
Shape‐Stabilization of Phase Change Materials with Carbon‐Conscious Poly(hydroxy)Urethane Foams
Lee, M., Dahlhauser, S. D., Lucci, C., Donohoe, B. S., ALLEN, R. D., & Rorrer, N. A. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202421039 · Cited by 20
Baroplastics – The future of low temperature plastic processing
MacKinnon, D. J., Godzina, M., & Becer, C. R. (2025) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2025.101967 · Cited by 12
Transforming Waste Cooking Oil into Linear and Branched Polyethylene Mimics
Mahadas, N. A., Sanchez, L. A. H., Suhail, A., Price, J., Anik, A. M., Kanan, M. W., Kuksenok, O., & Tang, C. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c16685 · Cited by 10
Sustainable Polymeric Biomaterials from Alternative Feedstocks
Lin, Q., Chee, P. L., Pang, J. J. M., Loh, X. J., Kai, D., & Lim, J. Y. C. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01154 · Cited by 11
Sustainable Biopolymer Colloids: Advances in Morphology for Enhanced Functionalities
Ahmad, M., Kim, B., & Velev, O. D. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c00013 · Cited by 9
Materials science underpinnings of micro and nanoplastics
Singh, M., Mendez, N. F., Valsecchi, M., Kumaraswamy, G., & Kumar, S. K. (2025) · Soft Matter · doi:10.1039/d5sm00297d · Cited by 8
Foaming Enables Material-Efficient Bioplastic Products with Minimal Persistence
James, B. D., Sun, Y., Pate, K., Shankar, R., Izallalen, M., Mazumder, S., Perri, S. T., Houston, K. R., Edwards, B., de Wit, J., et al. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c05822 · Cited by 9
Aramyan, L. H., van Velzen, E. U. T., Herceglić, N., Splinter, G. M., & Susa, A. (2025) · Environmental Economics and Policy Studies · doi:10.1007/s10018-025-00442-7 · Cited by 8
“Furthermore, switching over to alternative packaging materials such as glass, metal, paper and board will increase the greenhouse gas emissions (Licciardello 2017; Abejón et al. 2020; Meng et al. 2024).”
Li, Z., Qiu, L., Song, Z., Gong, K., Gan, X., Peng, C., & Qian, X. (2025) · Environmental Research · doi:10.1016/j.envres.2025.121616 · Cited by 8
Capodaglio, A. G. (2025) · Journal of Xenobiotics · doi:10.3390/jox15030085 · Cited by 12
“Furthermore, substituting plastic with other materials in all sectors would require, on average, about 57% more energy consumption and increase GHG emissions by 61% overall [1,2].”
Polysaccharide-based screen-printed colorimetric sensor for amines detection in packaged fish
Baptista, H., Dekker, M., Ferreira, P. C. N., & Nunes, C. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124012 · Cited by 9
Material Limitations and Processing Challenges of Bio‐Based Thermoplastics: A Review
Faria, C., Reis, D., Dias, D., Reis, R., & Cruz, S. M. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70436 · Cited by 6
Ochigue, P. C. D., Dingcong, R. G., Bondaug, J. C. S., Magalong, B. C. G., Dumancas, G. G., Gutierrez, C. S., Alguno, A. C., Malaluan, R. M., Lubguban, A. A.-O., & Bacosa, H. P. (2024) · Sustainability · doi:10.3390/su16198540 · Cited by 8
Gupta, S. P. (2024) · RSC Sustainability · doi:10.1039/d4su00541d · Cited by 7
Moist-Solid Biocatalysis Enables Processive Depolymerization of Crystalline PET
Arciszewski, J., Zaker, A., Xia, Y., Baniasadi, H., Lan, C. B., & Auclair, K. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c05858 · Cited by 5
A review on lignocellulosic fillers for sustainable thermoplastics
Baniasadi, H., Fazeli, M., Abidnejad, R., & Lizundia, E. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.180043 · Cited by 8
Embedded plastics and carbon emissions: future trends and challenges ahead
Zhang, S., Li, J., Xu, G., & Tan, Q. (2025) · 中国科学通报:英文版 · doi:10.1016/j.scib.2025.01.031 · Cited by 6
Analyzing Government Plans for the Plastic Value Chain in the Latin American Circular Economy
Rodríguez-Meza, L. R., Romero-Perdomo, F., & González‐Curbelo, M. Á. (2025) · Circular Economy and Sustainability · doi:10.1007/s43615-025-00558-8 · Cited by 9
“Policies aimed at reducing plastic use must be carefully designed, including bioplastics, to avoid the unintended promotion of alternatives that may worsen environmental impacts [ 54 ].”
Novel aromatic phosphonates as flame retardants for polybutylene succinate
Driever, T., Metzsch‐Zilligen, E., & Pfaendner, R. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111369 · Cited by 4
Dataset on the dynamic stocks and flows of 20 types of plastics in China, 1978–2022
Ren, Y., Zhu, H., Cao, Y., Jiang, X., Chen, D., Jiang, M., Xu, M., Guo, B., & Zhu, B. (2025) · Scientific Data · doi:10.1038/s41597-025-06363-0 · Cited by 4
Atiaa, A. G., E-Kader, S. M. A., & Ellakwa, D. E. (2025) · Medical Oncology · doi:10.1007/s12032-025-03024-5 · Cited by 6
Bioreactive separation technology: A retrospective and perspective
Waluga, T., Ohde, D., Ansorge‐Schumacher, M. B., Benfer, R., Bluemke, W., Briesen, H., Burger, J., Drews, A., Gescher, J., Glasmacher‐Remberg, C., et al. (2026) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2026.110787 · Cited by 3
Vuk, A., & Gáthy, A. B. (2026) · Cleaner Waste Systems · doi:10.1016/j.clwas.2026.100523 · Cited by 2
Avery, E., Lawrence, E., Nduagu, E. I., Richa, K., Sotomayor, L., ROUX, T. W., & Auras, R. A. (2026) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2026.108640 · Cited by 2
Abdul-Manan, A. F. N. (2025) · npj Clean Energy · doi:10.1038/s44406-025-00004-6 · Cited by 2
“Today,theworldproducesover400Mtofplasticsayear,upfrom2Mt in1950,anditisprojectedtogrowsigni fi cantly into the future, exceeding 1000 Mt by 2050 36,37 .”
InfluentialRadke, J., Argentopoulos, S., Dunn, E. W., & Zhao, J. (2025) · Waste Management · doi:10.1016/j.wasman.2025.114954 · Cited by 5
Masum, M. H., Zuthi, M. F. R., Khan, F., Hoque, A., Pal, S. K., Emon, A. U. I., Das, S. R., Kraft, E., & Kühlewindt, S. (2025) · Environmental Science and Pollution Research · doi:10.1007/s11356-025-36159-z · Cited by 2
“Scientists and researchers are persistently exploring alternatives to plastics due to their detrimental environmental effects, contribution to climate change, and adverse impacts on aquatic life and ecosystems (Meng et al. 2024; Nuojua et al. 2024; Singh et al. 2022).”
A Modeling and Optimization Framework for Energy-Materials-Mobility Transition Nexus
Flores, B. S. M. M., Sousa, M. P. D., Kakodkar, R., Niknezhad, S. S., & Pistikopoulos, E. N. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c02202 · Cited by 2
Bowley, N., Thomas, P. B. M., Sivaprasad, S., Purbrick, R. M. J., Beardmore, E., Gilbert, R. M., Clarke, A., & Chase, T. J. G. (2025) · Eye · doi:10.1038/s41433-025-04020-9 · Cited by 2
“…Optimising processes for decontaminating reusable equipment [16] Promoting circularity of plastic materials and cutting down on single-use plastic [17] Improving patient flow [18] Product innovation to improve patient outcomes and reduce environmental impact Opting for low-carbon substitutions…”
Towards carbon footprint measurement of the ERA Congress: five key strategies for greener events
Pettinelli, P., Fontana, M., Peired, A. J., Laranjinha, I., Knoeller, S., Demirtaş, G., Ferreira, A. C., Hourmant, M., & Gracin, S. (2025) · Nephrology Dialysis Transplantation · doi:10.1093/ndt/gfaf242 · Cited by 1
Garavito, J., Posada, N. C., Peña‐Venegas, C. P., & Castellanos, D. A. (2025) · Polymers · doi:10.3390/polym17243242 · Cited by 1
“However, calculations from China and the USA indicated that biodegradable packaging could not always reduce the carbon footprint when compared with that produced from fossil fuel sources [13].”
Towards sustainable plastics: a sustainable chemistry assessment
Chen, J., Zhang, Z., Jing, Q., Zhang, S., Lu, R., & Liu, J. (2025) · Green Chemistry · doi:10.1039/d5gc03504j · Cited by 1
Li, W., Schmuck, A., Caelenberg, L. V., Decottignies, V., Chang, H. B., Dupas, A., Ragaert, P., Gujar, S. A., van Eijk, M. C. P., & Meester, S. D. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.108811 · Cited by 1
Lee, D.-H., Wang, H., Zuo, X., Alazmi, A., Jiang, S., & Verduzco, R. (2026) · Macromolecular Rapid Communications · doi:10.1002/marc.202600006 · Cited by 1
“The global annual production of polymeric materials is rapidly approaching 500 Mt, but most of these materials are not amenable to efficient or cost-effective degradation, resulting in large quantities of waste plastics that are harmful to the environment [ 1, 2 ].”
Reducing greenhouse gas emissions from polymer processing at end-of-use
Gao, Y., Meng, F., Hawkin, J. L., Cullen, J. M., & Serrenho, A. C. (2026) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2026.148308 · Cited by 1
Self-citationThe plastic paradox: Resource efficiency, recycling imperative, and microplastic mitigation
Deeraj, B. D. S., Halder, A., De, A., & Bose, S. (2026) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2026.2675503 · Cited by 1
Srikanth, V., Reddy, B. S. B., Chandramouli, S., Reddy, K. R. N., Rajendar, K., & Heeraman, J. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102414 · Cited by 1
Cano, F., Arese, M., Brocani, G., Ponti, S., Ciaccio, G., & Brunella, V. (2026) · Polymers · doi:10.3390/polym18131646 · Cited by 1
“One of the central strategies in this transition is the replacement of conventional materials with lightweight polymers, which reduce vehicle mass and, consequently, fuel consumption and greenhouse gas emissions [4,5].”
Exploring Lifetime Approaches in Life Cycle Assessment of Textiles and Footwear
Costanzo, A., Frey, M., & Niero, M. (2025) · Proceedings of the 6th Product Lifetimes and the Environment Conference (PLATE2025) · doi:10.54337/plate2025-10298 · Cited by 1
Sustainable Plastics Manufacturing
Mendis, G. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-90386-8.00144-3
Plastic Containers and Their Health Effects: A Case Study (the Effect of Hot Food on Human Health)
Kindi, G. Y. A., Al-Ani, F. H., Bahr, H. M., & Hussain, T. A. (2024) · Springer eBooks · doi:10.1007/978-981-97-9364-8_40
Probabilistic refunds increase beverage container recycling behaviorPreprint
Radke, J., Argentopoulos, S., Dunn, E. W., & Zhao, J. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.5016156
Interception of urban surface source waste plastics by typical permeable paving materials
Han, N., Wen, Z., & Wu, C. (2026) · Cleaner Waste Systems · doi:10.1016/j.clwas.2026.100570
Circular Economy of Polymers – Its Current State in Germany and Beyond
Auer, M., Schmidt, J., & Woidasky, J. (2025) · Wiley eBooks · doi:10.1002/9783527847358.ch03
Liman, U., & Orth, P. (2025) · Springer eBooks · doi:10.1007/978-3-031-78829-1_3
Mabayo, V. I. F. (2025) · GeoJournal · doi:10.1007/s10708-025-11539-7
“Policies that only ban particular plastic products without considering the overall production and consumption system could only shift the environmental burden without actual mitigation (Dauvergne & Islam, 2023; Meng et al., 2024).”
From Bakelite to Biohazard: The Century-Long Rise of Microplastics
Mercola, J. M. (2025) · Cureus · doi:10.7759/cureus.99627
“A comprehensive LCA underscores one more point: substitution and trade-offs [127].”
Fagbemi, O. D., Gbadeyan, O. J., Andrew, J. E., & Sithole, B. (2025) · International Journal of Polymer Science · doi:10.1155/ijps/6637766
“Plastic material usage for di ff erent applications has raised consumer concerns about greenhouse gas emissions and carbon footprints [1].”
Hidden in plain sight – using a scoping review to reveal the neglected sachet economy crisis
Cullen, E., Yang, M., Pexas, G., & Sule, M. N. (2025) · Cleaner and Responsible Consumption · doi:10.1016/j.clrc.2025.100373 · Cited by 8
Biopolymers in Food Packaging Materials: Challenges and Opportunities
Asghari-Varzaneh, E., & Shekarchizadeh, H. (2026) · Materials horizons · doi:10.1007/978-981-95-2258-3_14
Leveraging Life Cycle Assessment for Informing Packaging Eco‐Design and Eco‐Modulation
Yudison, D. P. Y., Bher, A., & Auras, R. A. (2026) · Sustainable Development · doi:10.1002/sd.70659 · Cited by 1
Scientist's warning on recasting our relationship with plastics: Looking to the broader context
Rhodes, C. J., & Fresh-lands Environmental Actions, R. (2026) · Clean Technologies and Recycling · doi:10.3934/ctr.2026004 · Cited by 1
Assessing the Environmental Sustainability and Footprint of Industrial Packaging
Supto, S. T. J., & Ridoy, M. N. (2026) · doi:10.3390/engproc2025117034
Applications and Composites of Carbon Nanotubes Made from CO2
Licht, S. L., & Licht, G. (2026) · Springer eBooks · doi:10.1007/978-3-030-11155-7_252-1
Chen, Meng, and Luo: Winners of the ACS Sustainable Chemistry & Engineering Lectureship Award 2026
Licence, P. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c02982
PLASTIC BEYOND WASTE: REPURPOSING A PETROCHEMICAL BY PRODUCT IN THE AGE OF CLIMATE CRISIS
Velkov, D. (2026) · Economic Development/Ekonomski razvoj · doi:10.55302/ed26281209v
Emerging Polymers for Green Energy: Roadmap for Sustainable Development
Butsriruk, K., & Qu, M. (2026) · Clean Energy Production Technologies · doi:10.1007/978-981-92-0092-4_7
Whitman, J. B., Schussler, J. C., & Perez, M. A. (2026) · Journal of Sustainable Water in the Built Environment · doi:10.1061/jswbay.sweng-712
Vadas, D., Santiago‐Calvo, M., Sastre, C. A., Fernández, M.-T., & Cañibano, E. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6865207
Redefining sustainability in travel and hospitality to achieve net-zero tourism
Olawade, D. B., Wada, O. Z., Ijiwade, J. O., & Adeniji, Y. J. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-44454-8.00017-0
Välinen, L., Baniasadi, H., & Niskanen, J. (2026) · RSC Advances · doi:10.1039/d6ra02625g
Laib, I., Laib, D. E., Boucetta, S., Bengoechea, C., & Félix, M. (2026) · Iranian Polymer Journal · doi:10.1007/s13726-026-01713-0
Jo, J., Sereni, K. J., Kim, K. H., & Koo, B. (2026) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2026.07.007
Arriola, J. B., Weber, M., van Dulmen, N., Guinée, J. B., Vijver, M. G., & Balkenende, R. (2026) · Circular Economy and Sustainability · doi:10.1007/s43615-026-01077-w
Knowledge gaps impeding plastic governance in the European Union
Madsen, S. H. J., Bauer, F., Hansen, T., Nilsson, L. J., Almroth, B. C., Cullen, J. M., Dreyer, E., Milios, L., Mortensen, L. F., Nielsen, T. D., et al. (2026) · iScience · doi:10.1016/j.isci.2026.117065
Self-citationFattah, N. A., Salleh, M. Z. M., Yuhana, N. Y., Hashim, M. A., & Hadj-Kali, M. K. (2026) · Separations · doi:10.3390/separations13090246
“The use of alternative plastics requires the incorporation of plastic additives to enhance strength, and this also complicates end-of-life management [2].”
Wood and paper as alternatives to single-use plastics: supply chain considerations for North America
Greaves, J., Rothman, R. H., McKechnie, J., Nduagu, E. I., Richa, K., ROUX, T. W., & Meng, F. (2026) · Resources Conservation & Recycling Advances · doi:10.1016/j.rcradv.2026.200380
Self-citationLummerstorfer, T., Gall, M., Kruta, K., Hettrich-Keller, M., Salaberger, D., & Gahleitner, M. (2026) · Polymers · doi:10.3390/polym18192366
“This is in line with other application areas both in single-and multiple-use articles, as shown in an extensive study comparing polymers to metals, wood, paper, etc., where an increase in life-cycle greenhouse gas emissions of 35 to 700% was calculated for replacing the respective polymer [10].”
Environmental consequences of replacing polyethylene packaging in the United States and Europe
Tacker, M., Avery, E., Lawrence, E., HAFNER-KUHN, T., GSTÖHL, A., Nduagu, E. I., Sotomayor, L., Richa, K., ROUX, T. W., & Auras, R. A. (2026) · Resources Environment and Sustainability · doi:10.1016/j.resenv.2026.100390
Olid-Stephanchuk, A., Salsabilla, S. A., Putri, S. M. D., Ulum, M. C., Sujarwoto, S., Woods, J., Belesova, K., Millett, C. J., & Mwabonje, O. N. (2026) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-026-02751-9
“…policy measures alone may be insufficient; several studies show that focusing on reducing plastic con - sumption through encouraging reuse and the appropriate disposal and recycling of PW is a more effective approach to tackling this issue (Meng et al. 2024 ; Ministry of State Secretariat 2017).”
Azizah, N. A., Sartimbul, A., Herawati, E. Y., Permadi, S., Gautama, B. G., Darmayati, Y., Risandi, J., & Hindarti, D. (2026) · Ecotoxicology · doi:10.1007/s10646-026-03157-x
“Global plastic production exceeded 390 million metric tons in 2021 and is projected to surpass 1.3 billion tons by 2060, primarily driven by demand from packaging and consumer goods industries (Meng et al. 2024 ; Lee et al. 2023).”
InfluentialOuyang, K., Zhang, Y., Li, S., Li, S., Fang, Y., & Cao, Y. (2026) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.6c07521
Upcycling waste aromatic polymers as adsorbents for atmospheric water harvesting
Naryshkina, A., Schweng, P., & Woodward, R. T. (2026) · Chem Circularity · doi:10.1016/j.checir.2026.100175
One-Pot Chemobiological Degradation, Bioassimilation, and Upcycling of Waste Poly(lactic acid)
Iyer, S., Armijo-Galdames, B. O., & Sadler, J. C. (2026) · ACS Central Science · doi:10.1021/acscentsci.6c01107
Sustainability and recycling aspects of nucleation
Archodoulaki, V.-M., Koch, T., Paulik, C., & Gahleitner, M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-33228-9.00016-6
Metadata
- Authors
- Meng, F., Brandão, M., & Cullen, J. M.
- Affiliations
- University of Sheffield (GB)
- KTH Royal Institute of Technology (SE)
- University of Cambridge (GB)
- Corresponding author
- Brandão, Miguel
- Cullen, Jonathan M
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-01-31
- Volume
- 58
- Issue
- 6
- Pages
- 2716-2727
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- PMC
- PMC10867844
- OpenAlex
- W4391389442
- Cited by
- 97
- References
- 9
- Citations by year
- 2026: 40 · 2025: 42 · 2024: 15
- FWCI
- 11.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Environmental Science & Technology (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (submittedVersion)
- Apollo (University of Cambridge) (submittedVersion, cc-by)
- Funders
- C-THRU: Carbon clarity in the global petrochemical supply chain
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Environmental Science › Waste Management and Disposal › Municipal Solid Waste Management
- Keywords
- plastic alternatives, greenhouse gas emissions, life cycle assessment, food packaging, building materials, automotive plastics, textiles, durable goods, plastic recycling, waste collection, environmental policy trade-offs
- MeSH terms
- Greenhouse Gases, Plastics, Recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.