The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Understanding the Adsorption of PFOA on MIL-101(Cr)-Based Anionic-Exchange Metal–Organic Frameworks: Comparing DFT Calculations with Aqueous Sorption Experiments
Abstract
To examine the effects of different functionalization methods on adsorption behavior, anionic-exchange MIL-101(Cr) metal-organic frameworks (MOFs) were synthesized using preassembled modification (PAM) and postsynthetic modification (PSM) methods. Perfluorooctanoic acid (PFOA) adsorption results indicated that the maximum PFOA adsorption capacity was 1.19 and 1.89 mmol g(-1) for anionic-exchange MIL-101(Cr) prepared by PAM and PSM, respectively. The sorption equilibrium was rapidly reached within 60 min. Our results indicated that PSM is a better modification technique for introducing functional groups onto MOFs for adsorptive removal because PAM places functional groups onto the aperture of the nanopore, which hinders the entrance of organic contaminants. Our experimental results and the results of complementary density functional theory calculations revealed that in addition to the anion-exchange mechanism, the major PFOA adsorption mechanism is a combination of Lewis acid/base complexation between PFOA and Cr(III) and electrostatic interaction between PFOA and the protonated carboxyl groups of the bdc (terephthalic acid) linker.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mass Loading and Fate of Perfluoroalkyl Surfactants in Wastewater Treatment Plants
Sinclair, E., & Kannan, K. (2006) · Environmental Science & Technology · doi:10.1021/es051798v · Cited by 547
The p K a Values of PFOA and Other Highly Fluorinated Carboxylic Acids
Goss, K.-U. (2008) · Environmental Science & Technology · doi:10.1021/es702192c · Cited by 471
The Adsorption of Perfluorooctane Sulfonate onto Sand, Clay, and Iron Oxide Surfaces
Johnson, R. L., Anschutz, A. J., Smolen, J. M., Simcik, M. F., & Penn, R. L. (2007) · Journal of Chemical & Engineering Data · doi:10.1021/je060285g · Cited by 389
Cited by
Li, J., Wang, X., Zhao, G., Chen, C., Chai, Z., Alsaedi, A., Hayat, T., & Wang, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00543a · Cited by 1,856
Metal–organic frameworks (MOFs) for the removal of emerging contaminants from aquatic environments
Dhaka, S., Kumar, R., Deep, A., Kurade, M. B., Ji, S.-W., & Jeon, B.-H. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.10.003 · Cited by 615
Metal–Organic Frameworks for Food Safety
Wang, P.-L., Xie, L.-H., Joseph, E. A., Li, J.-R., Su, X.-O., & Zhou, H.-C. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00257 · Cited by 533
Revisiting the “forever chemicals”, PFOA and PFOS exposure in drinking water
(2023) · doi:10.1038/s41545-023-00274-6 · Cited by 439
Efficient PFAS Removal by Amine-Functionalized Sorbents: Critical Review of the Current Literature
Ateia, M., Alsbaiee, A., Karanfil, T., & Dichtel, W. (2019) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.9b00659 · Cited by 356
Metadata
- Authors
- Liu, K., Zhang, S., Hu, X., Zhang, K., Roy, A., & Yu, G.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-07-02
- Volume
- 49
- Issue
- 14
- Pages
- 8657-8665
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2272498207
- Cited by
- 312
- References
- 3
- FWCI
- 4.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.