The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Life Cycle Assessment of Cellulose Nanofibrils Production by Mechanical Treatment and Two Different Pretreatment Processes
Open accessAbstract
Nanocellulose is a bionanomaterial with many promising applications, but high energy use in production has been described as a potential obstacle for future use. In fact, life cycle assessment studies have indicated high life cycle energy use for nanocellulose. In this study, we assess the cradle-to-gate environmental impacts of three production routes for a particular type of nanocellulose called cellulose nanofibrils (CNF) made from wood pulp. The three production routes are (1) the enzymatic production route, which includes an enzymatic pretreatment, (2) the carboxymethylation route, which includes a carboxymethylation pretreatment, and (3) one route without pretreatment, here called the no pretreatment route. The results show that CNF produced via the carboxymethylation route clearly has the highest environmental impacts due to large use of solvents made from crude oil. The enzymatic and no pretreatment routes both have lower environmental impacts, of similar magnitude. A sensitivity analysis showed that the no pretreatment route was sensitive to the electricity mix, and the carboxymethylation route to solvent recovery. When comparing the results to those of other carbon nanomaterials, it was shown that in particular CNF produced via the enzymatic and no pretreatment routes had comparatively low environmental impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Toxic potential of materials at the nanolevel
Nel, A., Xia, T., Mädler, L., & Li, N. (2006) · Science · doi:10.1126/science.1114397 · Cited by 9,324
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Cited by
Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications
Thomas, B., Raj, M. C., B, A. K., H, R. M., Joy, J., Moores, A., Drisko, G. L., & Sanchez, C. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00627 · Cited by 1,714
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Nanofibrils in nature and materials engineering
Ling, S., Kaplan, D. L., & Buehler, M. J. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.16 · Cited by 730
Advances in cellulose nanomaterials
Kargarzadeh, H., Mariano, M., Gopakumar, D., Ahmad, I., Thomas, S., Dufresne, A., Huang, J., & Lin, N. (2018) · Cellulose · doi:10.1007/s10570-018-1723-5 · Cited by 508
Biopolymer nanofibrils: Structure, modeling, preparation, and applications
Ling, S., Chen, W., Fan, Y., Zheng, K., Jin, K., Yu, H., Buehler, M. J., & Kaplan, D. L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.004 · Cited by 463
Thonemann, N., Schulte, A., & Maga, D. (2020) · Sustainability · doi:10.3390/su12031192 · Cited by 354
Nanocellulose nanocomposite hydrogels: technological and environmental issues
Nascimento, D. M., Nunes, Y. L., Figueirêdo, M. C. B., de Azeredo, H. M. C., Aouada, F. A., Feitosa, J. P. A., Rosa, M. F., & Dufresne, A. (2018) · Green Chemistry · doi:10.1039/c8gc00205c · Cited by 332
Protein nanofibrils for next generation sustainable water purification
Peydayesh, M., & Mezzenga, R. (2021) · Nature Communications · doi:10.1038/s41467-021-23388-2 · Cited by 317
Mohammed, N., Grishkewich, N., & Tam, K. C. (2018) · Environmental Science: Nano · doi:10.1039/c7en01029j · Cited by 303
Recent advances in nanocellulose processing, functionalization and applications: a review
Thakur, V., Guleria, A., Kumar, S., Sharma, S., & Singh, K. (2021) · Materials Advances · doi:10.1039/d1ma00049g · Cited by 302
Nanocellulose: Recent advances and its prospects in environmental remediation
Shak, K. P. Y., Pang, Y. L., & Mah, S. K. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.232 · Cited by 286
Metadata
- Authors
- Arvidsson, R., Nguyen, D., & Svanström, M.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-15
- Volume
- 49
- Issue
- 11
- Pages
- 6881-6890
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W651368798
- Cited by
- 241
- References
- 2
- FWCI
- 4.73
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.