The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Reactivity of Nanoscale Zero-Valent Iron in Unbuffered Systems: Effect of pH and Fe(II) Dissolution
Abstract
While most published studies used buffers to maintain the pH, there is limited knowledge regarding the reactivity of nanoscale zerovalent iron (NZVI) in poorly buffered pH systems to date. In this work, the effect of pH and Fe(II) dissolution on the reactivity of NZVI was investigated during the reduction of 4-nitrophenol (4-NP) in unbuffered pH systems. The reduction rate increased exponentially with respect to the NZVI concentration, and the ratio of dissolved Fe(II)/initial NZVI was related proportionally to the initial pH values, suggesting that lower pH (6-7) with low NZVI loading may slow the 4-NP reduction through acceleration of the dissolution of NZVI particles. Additional experiments using buffered pH systems confirmed that high pH values (8-9) can preserve the NZVI particles against dissolution, thereby enhancing the reduction kinetics of 4-NP. Furthermore, reduction tests using ferrous ion in suspensions of magnetite and maghemite showed that surface-bound Fe(II) on oxide coatings can play an important role in enhancing 4-NP reduction by NZVI at pH 8. These unexpected results highlight the importance of pH and Fe(II) dissolution when NZVI technology is applied to poorly buffered systems, particularly at a low amount of NZVI (i.e., <0.075 g/L).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoscale iron particles for environmental remediation: An overview
Zhang, W.-X. (2003) · Journal of Nanoparticle Research · doi:10.1023/a:1025520116015 · Cited by 2,003
Cited by
Sun, Y., Li, J., Huang, T., & Guan, X. (2016) · Water Research · doi:10.1016/j.watres.2016.05.031 · Cited by 495
Advances in Surface Passivation of Nanoscale Zerovalent Iron: A Critical Review
Bae, S., Collins, R. N., Waite, T. D., & Hanna, K. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b01734 · Cited by 435
Self-citationLiu, K., Li, F., Cui, J., Yang, S., & Fang, L. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122623 · Cited by 257
Rayaroth, M. P., Lee, C.-S., Aravind, U. K., Aravindakumar, C. T., & Chang, Y.-S. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.031 · Cited by 126
Metadata
- Authors
- Bae, S., & Hanna, K.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-12
- Volume
- 49
- Issue
- 17
- Pages
- 10536-10543
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W941221119
- Cited by
- 165
- References
- 1
- FWCI
- 7.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.