The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Removal of Antimonite (Sb(III)) and Antimonate (Sb(V)) from Aqueous Solution Using Carbon Nanofibers That Are Decorated with Zirconium Oxide (ZrO2)
Open accessAbstract
Zirconium oxide (ZrO2)-carbon nanofibers (ZCN) were fabricated and batch experiments were used to determine antimonite (Sb(III)) and antimonate (Sb(V)) adsorption isotherms and kinetics. ZCN have a maximum Sb(III) and Sb(V) adsorption capacity of 70.83 and 57.17 mg/g, respectively. The adsorption process between ZCN and Sb was identified to be an exothermic and follows an ion-exchange reaction. The application of ZCN was demonstrated using tap water spiked with Sb (200 μg/L). We found that the concentration of Sb was well below the maximum contaminant level for drinking water with ZCN dosages of 2 g/L. X-ray photoelectron spectroscopy (XPS) revealed that an ionic bond of Zr-O was formed with Sb(III) and Sb(V). Based on the density functional theory (DFT) calculations, Sb(III) formed Sb-O and O-Zr bonds on the surface of the tetragonal ZrO2 (t-ZrO2) (111) plane and monoclinic ZrO2 planes (m-ZrO2) (111) plane when it adsorbs. Only an O-Zr bond was formed on the surface of t-ZrO2 (111) plane and m-ZrO2 (111) plane for Sb(V) adsorption. The adsorption energy (Ead) of Sb(III) and Sb(V) onto t-ZrO2 (111) plane were 1.13 and 6.07 eV, which were higher than that of m-ZrO2 (0.76 and 3.35 eV, respectively).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Density-functional exchange-energy approximation with correct asymptotic behavior
Becke, A. D. (1988) · Physical Review A · doi:10.1103/physreva.38.3098 · Cited by 53,711
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
From molecules to solids with the DMol3 approach
Delley, B. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1316015 · Cited by 11,026
An all-electron numerical method for solving the local density functional for polyatomic molecules
Delley, B. (1990) · The Journal of Chemical Physics · doi:10.1063/1.458452 · Cited by 10,536
Hardness conserving semilocal pseudopotentials
Delley, B. (2002) · Physical Review B · doi:10.1103/physrevb.66.155125 · Cited by 1,847
Antimony in the environment: a review focused on natural waters
Filella, M., Belzile, N., & Chen, Y.-W. (2002) · Earth-Science Reviews · doi:10.1016/s0012-8252(01)00070-8 · Cited by 1,291
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
Wilson, S. C., Lockwood, P. V., Ashley, P. M., & Tighe, M. (2010) · Environmental Pollution · doi:10.1016/j.envpol.2009.10.045 · Cited by 847
The electronic structure of oxygen vacancy defects at the low index surfaces of ceria
Nolan, M., Parker, S. C., & Watson, G. W. (2005) · Surface Science · doi:10.1016/j.susc.2005.08.015 · Cited by 825
Antimony in the environment: a review focused on natural waters
Filella, M., Belzile, N., & Chen, Y.-W. (2002) · Earth-Science Reviews · doi:10.1016/s0012-8252(02)00089-2 · Cited by 674
Ungureanu, G., Santos, S., Boaventura, R., & Botelho, C. (2015) · Journal of Environmental Management · doi:10.1016/j.jenvman.2014.12.051 · Cited by 660
He, M., Wang, X., Wu, F., & Fu, Z. (2012) · Science of The Total Environment · doi:10.1016/j.scitotenv.2011.06.009 · Cited by 632
Magnetic Chitosan Nanocomposites: A Useful Recyclable Tool for Heavy Metal Ion Removal
Liu, X., Hu, Q., Fang, Z., Zhang, X., & Zhang, B. (2009) · Langmuir · doi:10.1021/la802754t · Cited by 532
Haider, S., & Park, S.-Y. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.11.046 · Cited by 414
Adsorption of antimony onto iron oxyhydroxides: Adsorption behavior and surface structure
Guo, X., Wu, Z., He, M., Meng, X., Jin, X., Qiu, N., & Zhang, J. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.05.025 · Cited by 406
Electrospun membrane of cellulose acetate for heavy metal ion adsorption in water treatment
Tian, Y., Wu, M., Liu, R., Li, Y., Wang, D., Tan, J., Wu, R., & Huang, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.054 · Cited by 297
Guo, X., Wu, Z., & He, M. (2009) · Water Research · doi:10.1016/j.watres.2009.06.033 · Cited by 294
Antimony(V) Incorporation into Synthetic Ferrihydrite, Goethite, and Natural Iron Oxyhydroxides
Mitsunobu, S., Takahashi, Y., Terada, Y., & Sakata, M. (2010) · Environmental Science & Technology · doi:10.1021/es903901e · Cited by 290
Effect of pH on the removal of arsenic and antimony using reverse osmosis membranes
Kang, M., Kawasaki, M., Tamada, S., Kamei, T., & Magara, Y. (2000) · Desalination · doi:10.1016/s0011-9164(00)90027-4 · Cited by 285
Effect of chitosan on morphology and conformation of electrospun silk fibroin nanofibers
Park, W. H., Jeong, L., Yoo, D. I., & Hudson, S. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.045 · Cited by 283
The mechanism of antimony(III) removal and its reactions on the surfaces of Fe–Mn Binary Oxide
Xu, W., Wang, H., Liu, R., Zhao, X., & Qu, J. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.07.026 · Cited by 274
Self-citationLuo, X., Wang, C., Wang, L., Deng, F., Luo, S., Tu, X., & Au, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.01.017 · Cited by 265
Self-citationSun, T., Zhang, Z., Xiao, J., Chen, C., Xiao, F., Wang, S., & Liu, Y. (2013) · Scientific Reports · doi:10.1038/srep02527 · Cited by 253
Kaşgöz, H., Durmuş, A., & Kaşgöz, A. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.999 · Cited by 233
Recovery of Lithium from Wastewater Using Development of Li Ion-Imprinted Polymers
Luo, X., Guo, B., Luo, J., Deng, F., Zhang, S., Luo, S., & Crittenden, J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500659h · Cited by 186
Self-citationAdsorption characteristics of copper(II) onto spent activated clay
Weng, C.-H., Tsai, C.-Z., Chu, S.-H., & Sharma, Y. C. (2007) · Separation and Purification Technology · doi:10.1016/j.seppur.2006.09.009 · Cited by 182
Adsorption of antimony and arsenic from a copper electrorefining solution onto activated carbon
Navarro, P., & Alguacil, F. J. (2002) · Hydrometallurgy · doi:10.1016/s0304-386x(02)00108-1 · Cited by 158
Zhao, X., Dou, X., Mohan, D., Pittman, C. U. J., Ok, Y. S., & Jin, X. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.02.096 · Cited by 151
Arsenate removal by nanostructured ZrO2 spheres.
Hristovski, K., Westerhoff, P., Crittenden, J., & Olson, L. W. (2008) · Environmental Science and Technology · doi:10.1021/es702952p · Cited by 144
Self-citationThe antimonide oxides REZnSbO and REMnSbO (RE = Ce, Pr) – An XPS study
Gurgul, J., Rinke, M. T., Schellenberg, I., et al. (2012) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2012.11.014 · Cited by 132
Bregoli, L., Chiarini, F., Gambarelli, A., Sighinolfi, G., Gatti, A. M., Santi, P., Martelli, A. M., & Cocco, L. (2009) · Toxicology · doi:10.1016/j.tox.2009.05.017 · Cited by 114
Wang, C., Fan, K., & Liu, Z. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067510z · Cited by 111
Antimony sorption at gibbsite–water interface
Rakshit, S., Sarkar, D., Punamiya, P., & Datta, R. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2011.03.028 · Cited by 109
Cui, H., Su, Y., Li, Q., Gao, S., & Shang, J. K. (2013) · Water Research · doi:10.1016/j.watres.2013.07.040 · Cited by 108
DFT study of Sb(III) and Sb(V) adsorption and heterogeneous oxidation on hydrated oxide surfaces
Mason, S. E., Trainor, T. P., & Goffinet, C. J. (2011) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2011.11.031 · Cited by 30
Cited by
Lyu, H., Tang, J., Huang, Y., Gai, L., Zeng, E. Y., Liber, K., & Gong, Y. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.058 · Cited by 578
Removal of chelated heavy metals from aqueous solution: A review of current methods and mechanisms
Zhu, Y., Fan, W., Zhou, T., & Li, X. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.04.416 · Cited by 432
Antimony contamination, consequences and removal techniques: A review
Li, J., Zheng, B., He, Y., Zhou, Y., Chen, X., Ruan, S., Yang, Y., Dai, C., & Tang, L. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2018.03.024 · Cited by 279
Self-citationEnhanced antimonate (Sb(V)) removal from aqueous solution by La-doped magnetic biochars
Wang, L., Wang, J., Wang, Z., He, C., Lyu, W., Yan, W., & Yang, L. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.074 · Cited by 180
Metadata
- Authors
- Luo, J., Luo, X., Crittenden, J., Qu, J., Bai, Y., Peng, Y., & Li, J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-28
- Volume
- 49
- Issue
- 18
- Pages
- 11115-11124
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2248793432
- Cited by
- 295
- References
- 36
- FWCI
- 11.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.