The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas
Abstract
The surface area of zinc sulfide (ZnS) was successfully enlarged using nanostructure particles synthesized by a liquid-phase precipitation method. The ZnS with the highest surface area (named Nano-ZnS) of 196.1 m(2)·g(-1) was then used to remove gas-phase elemental mercury (Hg(0)) from simulated coal combustion fuel gas at relatively high temperatures (140 to 260 °C). The Nano-ZnS exhibited far greater Hg(0) adsorption capacity than the conventional bulk ZnS sorbent due to the abundance of surface sulfur sites, which have a high binding affinity for Hg(0). Hg(0) was first physically adsorbed on the sorbent surface and then reacted with the adjacent surface sulfur to form the most stable mercury compound, HgS, which was confirmed by X-ray photoelectron spectroscopy analysis and a temperature-programmed desorption test. At the optimal temperature of 180 °C, the equilibrium Hg(0) adsorption capacity of the Nano-ZnS (inlet Hg(0) concentration of 65.0 μg·m(-3)) was greater than 497.84 μg·g(-1). Compared with several commercial activated carbons used exclusively for gas-phase mercury removal, the Nano-ZnS was superior in both Hg(0) adsorption capacity and adsorption rate. With this excellent Hg(0) removal performance, noncarbon Nano-ZnS may prove to be an advantageous alternative to activated carbon for Hg(0) removal in power plants equipped with particulate matter control devices, while also offering a means of reusing fly ash as a valuable resource, for example as a concrete additive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
Sulfate stimulation of mercury methylation in freshwater sediments
Gilmour, C. C., Henry, E. A., & Mitchell, R. (1992) · Environmental Science & Technology · doi:10.1021/es00035a029 · Cited by 1,124
Status review of mercury control options for coal-fired power plants
Pavlish, J. H., Sondreal, E. A., Mann, M. D., Olson, E. S., Galbreath, K. C., Laudal, D. L., & Benson, S. A. (2003) · Fuel Processing Technology · doi:10.1016/s0378-3820(03)00059-6 · Cited by 885
Li, H., Wu, C., Li, Y., & Zhang, J. (2011) · Environmental Science & Technology · doi:10.1021/es2007808 · Cited by 363
Self-citationSynthesis and Photoluminescence of Nanocrystalline ZnS:Mn2+
Suyver, J. F., Wuister, S. F., Kelly, J. J., & Meijerink, A. (2001) · Nano Letters · doi:10.1021/nl015551h · Cited by 339
XAS and XPS Characterization of Mercury Binding on Brominated Activated Carbon
Hutson, N. D., Attwood, B. C., & Scheckel, K. G. (2007) · Environmental Science & Technology · doi:10.1021/es062121q · Cited by 282
Sorption of Elemental Mercury by Activated Carbons
Krishnan, S. V., Gullett, B. K., & Jozewicz, W. (1994) · Environmental Science & Technology · doi:10.1021/es00057a020 · Cited by 250
Ruhl, L., Vengosh, A., Dwyer, G. S., Hsu-Kim, H., Deonarine, A., Bergin, M., & Kravchenko, J. (2009) · Environmental Science & Technology · doi:10.1021/es900714p · Cited by 194
Mercury removal by bio-char based modified activated carbons
De, M., Azargohar, R., Dalai, A. K., & Shewchuk, S. R. (2013) · Fuel · doi:10.1016/j.fuel.2012.08.011 · Cited by 194
Impact of Sulfur Oxides on Mercury Capture by Activated Carbon
Presto, A. A., & Granite, E. (2007) · Environmental Science & Technology · doi:10.1021/es0708316 · Cited by 193
Cited by
Wang, L., Hou, D., Cao, Y., Ok, Y. S., Tack, F. M. G., Rinklebe, J., & O'Connor, D. (2020) · Environment International · doi:10.1016/j.envint.2019.105281 · Cited by 396
Metadata
- Authors
- Li, H., Zhu, L., Wang, J., Li, L., & Shih, K.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-24
- Volume
- 50
- Issue
- 17
- Pages
- 9551-9557
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2486566254
- Cited by
- 281
- References
- 16
- FWCI
- 22.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.