The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Degradation of Bisphenol A by Peroxymonosulfate Catalytically Activated with Mn1.8Fe1.2O4 Nanospheres: Synergism between Mn and Fe
Abstract
A high-efficient, low-cost, and eco-friendly catalyst is highly desired to activate peroxides for environmental remediation. Due to the potential synergistic effect between bimetallic oxides’ two different metal cations, these oxides exhibit superior performance in the catalytic activation of peroxymonosulfate (PMS). In this work, novel Mn 1.8 Fe 1.2 O 4 nanospheres were synthesized and used to activate PMS for the degradation of bisphenol A (BPA), a typical refractory pollutant. The catalytic performance of the Mn 1.8 Fe 1.2 O 4 nanospheres was substantially greater than that of the Mn/Fe monometallic oxides and remained efficient in a wide pH range from 4 to 10. More importantly, a synergistic effect between solid-state Mn and Fe was identified in control experiments with Mn 3 O 4 and Fe 3 O 4 . Mn was inferred to be the primary active site in the surface of the Mn 1.8 Fe 1.2 O 4 nanospheres, while Fe(III) was found to play a key role in the synergism with Mn by acting as the main adsorption site for the reaction substrates. Both sulfate and hydroxyl radicals were generated in the PMS activation process. The intermediates of BPA degradation were identified and the degradation pathways were proposed. This work is expected to help to elucidate the rational design and efficient synthesis of bimetallic materials for PMS activation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Buxton, G. V., Greenstock, C. L., Helman, W. P., & Ross, A. B. (1988) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555805 · Cited by 12,332
637. The stability of transition-metal complexes
Irving, H., & Williams, R. J. P. (1953) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9530003192 · Cited by 2,116
Han, L., Yu, X., & Lou, X. W. (. (2016) · Advanced Materials · doi:10.1002/adma.201506315 · Cited by 633
Cited by
Fu, H., Ma, S., Zhao, P., Xu, S., & Zhan, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.207 · Cited by 486
Chen, F., Huang, G.-X., Yao, F.-B., Yang, Q., Zheng, Y.-M., Zhao, Q.-B., & Yu, H.-Q. (2020) · Water Research · doi:10.1016/j.watres.2020.115559 · Cited by 459
Self-citationSandwich-like Co3O4/MXene composite with enhanced catalytic performance for Bisphenol A degradation
Liu, Y., Luo, R., Li, Y., Qi, J., Wang, C., Li, J., Sun, X., & Wang, L. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.155 · Cited by 282
Self-citationZhu, K., Wang, X., Geng, M., Chen, D., Lin, H., & Zhang, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.06.006 · Cited by 223
Ren, W., Huang, X., Wang, L., Liu, X., Zhou, Z., Wang, Y., Lin, C., He, M., & Ouyang, W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131876 · Cited by 75
Metadata
- Authors
- Huang, G.-X., Wang, C.-Y., Yang, C.-W., Guo, P.-C., & Yu, H.-Q.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-18
- Volume
- 51
- Issue
- 21
- Pages
- 12611-12618
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2763540983
- Cited by
- 905
- References
- 3
- FWCI
- 29.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.