Microbial Targeted Degradation Pretreatment: A Novel Approach to Preparation of Activated Carbon with Specific Hierarchical Porous Structures, High Surface Areas, and Satisfactory Toluene Adsorption Performance
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Hierarchical porous carbon shows great potential for volatile organic compounds (VOCs) removal due to its high surface area and abundant porous framework. However, current fabrication protocols are complex and cause secondary pollution, limiting their application. Here, as a novel strategy, microbial lignocellulose decomposition as a pretreatment was introduced to fabricate hierarchical porous carbon (M-AC) from crude biomass substrate. The M-AC samples had high specific surface areas (maximum: 2290 m 2 ·g –1 ) and surfaces characterized by needle-like protrusions with a high degree of disorder attributed to hierarchical porous structures. Dynamic toluene adsorption indicated that the carbon materials with microbial pretreatment had much better adsorption performances (maximum: 446 mg/g) than activated carbon without pretreatment. The M-AC material pretreated with a cellulose-degrading microbe showed the best adsorption capacity due to well-developed micropores, whereas the M-AC material pretreated with a lignin-degrading microbe showed excellent transport diffusion due to well-developed mesopores. Therefore, this simple and effective approach using microbial decomposition pretreatment is promising for the development of hierarchical porous carbons with adjustable pore structures and high specific surface areas to remove target VOCs in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of VOCs onto engineered carbon materials: A review
Zhang, X., Gao, B., Creamer, A. E., Cao, C., & Li, Y. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.05.013 · Cited by 1,479
Khezami, L., Chetouani, A., Taouk, B., & Capart, R. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.05.009 · Cited by 236
Liu, D., Zhang, W., Lin, H., Li, Y., Lu, H., & Wang, Y. (2015) · RSC Advances · doi:10.1039/c4ra15111a · Cited by 130
Self-citation
Metadata
- Authors
- Zhang, W., Cheng, H., Niu, Q., Fu, M., Huang, H., & Ye, D.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-03
- Volume
- 53
- Issue
- 13
- Pages
- 7632-7640
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2948789112
- Cited by
- 166
- References
- 3
- FWCI
- 7.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microbial Targeted Degradation Pretreatment: A Novel Approach to Preparation of Activated Carbon with Specific Hierarchical Porous Structures, High Surface Areas, and Satisfactory Toluene Adsorption Performance. https://app.cochat.ai/papers/10.1021/acs.est.9b01159
- The paper
- Zhang, W., Cheng, H., Niu, Q., Fu, M., Huang, H., & Ye, D. (2019). Microbial Targeted Degradation Pretreatment: A Novel Approach to Preparation of Activated Carbon with Specific Hierarchical Porous Structures, High Surface Areas, and Satisfactory Toluene Adsorption Performance. Environmental Science & Technology. https://doi.org/10.1021/acs.est.9b01159
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.