The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Studies on CO2 Adsorption and Desorption Properties from Various Types of Iron Oxides (FeO, Fe2O3, and Fe3O4)
Abstract
Various type iron oxides of FeO, Fe 2 O 3, and Fe 3 O 4 were used for carbon dioxide (CO 2 ) capture at room temperature and pressure by studying its adsorption–desorption properties. Several interactions of carbonate species were detected on its surface. The morphology of carbonate formation shows different structures on FeO (grooves-like), Fe 2 O 3 (fine sharp particles), and Fe 3 O 4 (aggregated nanoparticles). CO 2 chemisorption discovered a potential adsorbent of Fe 2 O 3 with an adsorption capacity of 3.95 mg CO2 /g adsorbent . The adsorption capacity increased up to 62.8% by using concentrated 99.9% CO 2 for adsorption. At higher concentration of CO 2 exposure, it partially turns to red color which indicated the less stable Fe 3 O 4 was easily oxidized to Fe 2 O 3 after CO 2 regeneration with temperatures up to 500 °C. Hence, Fe 2 O 3 possessed the highest basicity strength (1.26 cm 3 /g), and the adsorption capacity after four cycles was not significantly reduced by 8.6% indicating an effective chemical or physical adsorption in CO 2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mid-infrared reflectance spectra and optical constants of six iron oxide/oxyhydroxide phases
Glotch, T. D., & Rossman, G. R. (2009) · Icarus · doi:10.1016/j.icarus.2009.07.024 · Cited by 84
Cited by
Directly converting CO2 into a gasoline fuel
Wei, J., Ge, Q., Yao, R., Wen, Z., Fang, C., Guo, L., Xu, H., & Sun, J. (2017) · Nature Communications · doi:10.1038/ncomms15174 · Cited by 1,086
A review of the catalytic hydrogenation of carbon dioxide into value-added hydrocarbons
Yang, H., Zhang, C., Gao, P., Wang, H., Li, X., Zhong, L., Wei, W., & Sun, Y. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy01403a · Cited by 530
Impacts of the Catalyst Structures on CO2 Activation on Catalyst Surfaces
Etim, U. J., Zhang, C., & Zhong, Z. (2021) · Nanomaterials · doi:10.3390/nano11123265 · Cited by 175
Metadata
- Authors
- Hakim, A., Marliza, T. S., Abu Tahari, N. M., Wan Isahak, R. W. N., Yusop, R. M., Mohamed Hisham, W. M., & Yarmo, A. M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-24
- Volume
- 55
- Issue
- 29
- Pages
- 7888-7897
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2300248278
- Cited by
- 192
- References
- 1
- FWCI
- 8.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Studies on CO2 Adsorption and Desorption Properties from Various Types of Iron Oxides (FeO, Fe2O3, and Fe3O4). https://app.cochat.ai/papers/10.1021/acs.iecr.5b04091
- The paper
- Hakim, A., Marliza, T. S., Abu Tahari, N. M., Wan Isahak, R. W. N., Yusop, R. M., Mohamed Hisham, W. M., & Yarmo, A. M. (2016). Studies on CO2 Adsorption and Desorption Properties from Various Types of Iron Oxides (FeO, Fe2O3, and Fe3O4). Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.5b04091
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.