Cited by 96Extraction and Separation ProcessesAdsorption and biosorption for pollutant removalChemical Synthesis and Characterization

Recovery of lithium ions from seawater using a continuous flow adsorption column packed with granulated chitosan–lithium manganese oxide

Ryu, Taegong, Haldorai, Yuvaraj, Rengaraj, Arunkumar, Shin, Junho, Hong, Hye-Jin, Lee, Go-Woon, Han, Young-Kyu, Huh, Yun Suk +1 more·2016·Industrial & Engineering Chemistry Research

Abstract

We demonstrated an efficient recovery of lithium ions (Li + ) from seawater using a continuous flow column packed with an adsorbent, chitosan–lithium manganese oxide (LMO). The effects of Li + concentration, contact time, and recyclability were investigated. The adsorbent showed good removal efficiency of Li + from seawater. The maximum adsorption capacity was calculated to be 54.65 mg/g. The adsorption process fit well with the Freundlich isotherm with a correlation coefficient of 0.9924. Kinetics studies showed that the adsorption process was consistent with the pseudo-second-order model. The recyclability was tested after extraction of Li + from the adsorbent using sulfuric acid. The adsorption capacity decreased slightly after recycling the adsorbent three times. This may be due to the dissolution of Mn 2+ and deformation of the chitosan structure. A study of the selectivity of Li + in seawater showed that the selectivity increased in the order Li + > Mg 2+ > Na + .

Integrity signals

Registry

Crossref · 10.1021/acs.iecr.6b01632

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The highest recorded Li+ adsorption capacities for Li1.33Mn1.67O4 from seawater and salt lake brine are 54.7 and 63 mg/g, respectively.

    “The highest recorded Li + adsorption capacities for Li1.33Mn1.67O4 from seawater and salt lake brine are 54.7 and 63 mg/g, respectively (Zandevakili et al., 2014; Ryu et al., 2016).”

The citation lists haven’t been fetched yet

References 33 · Cited by 96

Authors
Ryu, T., Haldorai, Y., Rengaraj, A., Shin, J., Hong, H.-J., Lee, G.-W., Han, Y.-K., Huh, Y. S., & Chung, K.-S.
Affiliations
  • Korea Institute of Geoscience and Mineral Resources (KR)
  • Dongguk University (KR)
  • Inha University (KR)
  • Korea Institute of Energy Research (KR)
Corresponding author
  • Huh, Yun Suk
  • Chung, Kang-Sup
Venue
Industrial & Engineering Chemistry Research
Published
2016-06-22
Volume
55
Issue
26
Pages
7218-7225
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2433351636
Cited by
96
References
33
Citations by year
2026: 6 · 2025: 13 · 2024: 19 · 2023: 10 · 2022: 11 · 2021: 11 · 2020: 11 · 2019: 5 · 2018: 7 · 2017: 1 · 2016: 2
FWCI
4.45
Type
journal article
Language
en
Open access
closed
Locations
Industrial & Engineering Chemistry Research (publishedVersion)
Funders
Ministry of Oceans and Fisheries
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Extraction and Separation Processes
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Chemical Synthesis and Characterization
Keywords
lithium recovery, seawater, chitosan, LiMn2O4, adsorption, continuous flow column, adsorbent reusability, Freundlich isotherm, pseudo-second-order kinetics, metal ion selectivity, adsorption capacity

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review