The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Understanding the Role of Choline Chloride in Deep Eutectic Solvents Used for Biomass Delignification
Open accessAbstract
The role of choline chloride in biomass delignification by a deep eutectic solvent (DES) containing lactic acid was investigated. In this study, the influence of choline chloride on pulping of Eucalyptus globulus chips was determined. Pulping experiments were performed at 120 °C for 8 h with a DES to wood ratio of 20:1. Various experiments were performed to study the influence of choline chloride on lignin solubility, cleaving reactions, and mass transfer in order to gain an understanding of the observed pulping results. It was found that the chloride anion is the active component of choline chloride. In fact, the inexpensive salt NaCl performed as well as choline chloride in that respect. Furthermore, choline chloride is already effective in a 1:250 M ratio to lactic acid. Studies on milled wood lignin show that choline chloride increases the cleavage rate of β-O-4 and thereby increases the delignification rate of biomass. Furthermore, choline chloride slightly decreased the solubility of lignin in DESs and due to an increase in viscosity decreased the estimated mass transfer coefficient. Overall, the delignification rate of Eucalyptus by lactic acid increased by the addition of halide salts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Abbott, A. P., Boothby, D., Capper, G., Davies, D. L., & Rasheed, R. K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048266j · Cited by 4,340
Production of first and second generation biofuels: A comprehensive review
Naik, S. N., Goud, V. V., Rout, P. K., & Dalai, A. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.003 · Cited by 3,264
Francisco, M., van den Bruinhorst, A., & Kroon, M. C. (2012) · Green Chemistry · doi:10.1039/c2gc35660k · Cited by 814
Kumar, A. K., Parikh, B. S., & Pravakar, M. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-015-4780-4 · Cited by 571
Green solvents for sustainable separation processes
Schuur, B., Brouwer, T., Smink, D., & Sprakel, L. M. J. (2019) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.12.009 · Cited by 126
Self-citationFast pyrolysis of lignins with different molecular weight: Experiments and modelling
Marathe, P. S., Westerhof, R. J. M., & Kersten, S. R. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.058 · Cited by 71
Self-citation
Cited by
Xu, H., Peng, J., Kong, Y., Liu, Y., Su, Z., Li, B., Song, X., Liu, S., & Tian, W. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123416 · Cited by 314
Recent advances of greener pretreatment technologies of lignocellulose
Roy, R., Rahman, M. S., & Raynie, D. E. (2020) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2020.100035 · Cited by 263
Yang, L., Zheng, T., Huang, C., & Yao, J. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.06.066 · Cited by 35
Metadata
- Authors
- Smink, D., Juan, A., Schuur, B., & Kersten, S. R. A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-08-19
- Volume
- 58
- Issue
- 36
- Pages
- 16348-16357
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2969217464
- Cited by
- 173
- References
- 6
- FWCI
- 5.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.