The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Adsorption Equilibrium, Kinetics, and Thermodynamic Studies of Fluoride Adsorbed by Tetrametallic Oxide Adsorbent
Abstract
This study investigated the performance of fluoride adsorption onto a specific tetrametallic oxide adsorbent Fe–Al–Ce-Ni (FACN) and the effect of temperature on adsorption performance. The adsorption performance was determined by adsorption equilibrium, kinetics, and thermodynamic parameters. The adsorption, kinetic, and thermodynamic parameters were compared alternatively. The fluoride adsorption capacity was obtained from four different adsorption isotherm models, namely, Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R), and Freundlich was found to best fit model. Fluoride removal rate using adsorption (0.27 min –1 ) was obtained faster than reactive adsorption (0.04 min –1 ). Several thermodynamic parameters such as enthalpy, Gibbs free energy, entropy (Δ S > 0), and adsorption activation energy were calculated which demonstrated the feasibility and spontaneity (Δ G < 0) and exothermic nature of (Δ H < 0) the fluoride adsorption process. The adsorption process was controlled by a physical mechanism, and the maximum adsorption capacity was found to be 250 mg/g. To our knowledge, this is the first report on the synthesis of tetrametallic oxide adsorbent for fluoride adsorption, and the feasibility of the adsorption process was ratified by three van’t Hoff plots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Cited by
Hu, Q., & Zhang, Z. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.01.005 · Cited by 641
Application of isotherms models and error functions in activated carbon CO2 sorption processes
Serafin, J., & Dziejarski, B. (2023) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2023.112513 · Cited by 268
Yang, Z., Hou, J., Wu, J., & Miao, L. (2021) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2021.112750 · Cited by 70
Metadata
- Authors
- Raghav, S., & Kumar, D.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-03-14
- Volume
- 63
- Issue
- 5
- Pages
- 1682-1697
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2791452082
- Cited by
- 219
- References
- 1
- FWCI
- 5.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.