The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Manipulating the Thermal Conductivity of Monolayer MoS2 via Lattice Defect and Strain Engineering
Abstract
Monolayer molybdenum disulfide (MoS 2 ), a new two-dimensional material beyond graphene, has attracted tremendous attention recently. Its applications in nanoelectronic and thermoelectric devices usually require manipulating the thermal transport properties. Using nonequilibrium molecular dynamics simulations, we investigated the effects of lattice defects and mechanical strain on the thermal conductivity of MoS 2 . We found that the thermal conductivity of monolayer MoS 2 can be effectively tuned by introducing even a small amount of lattice defects. For example, a 0.5% concentration of mono-Mo vacancies is able to reduce the thermal conductivity by about 60%. Remarkably, the thermal conductivity of the defected sample can further be tuned by mechanical strain. For example, a 12% tensile strain is able to reduce the thermal conductivity by another 60%. We also found that the tensile strain exerts almost the same impact on the thermal conductivity of both pristine and defective MoS 2, which signifies that there is no apparent coupling between defects and strain in affecting the thermal conductivity. Our analyses of the vibrational density of state and spectral energy density show that the underlying mechanisms for these drastic changes are (1) the reduction of the phonon relaxation time arising from phonon–defect scattering and (2) the reduction of the group velocity and heat capacity caused by tensile strain. Our findings here provide important insights and guidelines for the use of monolayer MoS 2 in thermal management and thermoelectric devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride
Jo, I., Pettes, M. T., Kim, J., Watanabe, K., Taniguchi, T., Yao, Z., & Shi, L. (2013) · Nano Letters · doi:10.1021/nl304060g · Cited by 770
Cited by
Colloquium: Phononic thermal properties of two-dimensional materials
Gu, X., Wei, Y., Yin, X., Li, B., & Yang, R. (2018) · Reviews of Modern Physics · doi:10.1103/revmodphys.90.041002 · Cited by 378
Recent progress on graphene-analogous 2D nanomaterials: Properties, modeling and applications
Liu, B., & Zhou, K. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.09.004 · Cited by 329
Thermoelectric properties of two-dimensional transition metal dichalcogenides
Zhang, G., & Zhang, Y.-W. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01088e · Cited by 301
Self-citationPhonon thermal conduction in novel 2D materials
Xu, X., Chen, J., & Li, B. (2016) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/28/48/483001 · Cited by 137
Metadata
- Authors
- Ding, Z., Pei, Q.-X., Jiang, J.-W., & Zhang, Y.-W.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-07-01
- Volume
- 119
- Issue
- 28
- Pages
- 16358-16365
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2509777341
- Cited by
- 209
- References
- 2
- FWCI
- 6.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.