The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Reactivity at the Lithium–Metal Anode Surface of Lithium–Sulfur Batteries
Open accessAbstract
Due to their high energy density and reduced cost, lithium–sulfur batteries are promising alternatives for applications such as electrical vehicles. However, a number of technical challenges need to be overcome in order to make them feasible for commercial uses. These challenges arise from the battery highly interconnected chemistry, which besides the electrochemical reactions includes side reactions at both electrodes and migration of soluble polysulfide (PS) species produced at the cathode to the anode side. The presence of such PS species alters the already complex reactivity of the Li anode. In this work, interfacial reactions occurring at the surface of Li metal anodes due to electrochemical instability of the electrolyte components and PS species are investigated with density functional theory and ab initio molecular dynamics methods. It is found that the bis(trifluoromethane)sulfonimide lithium salt reacts very fast when in contact with the Li surface, and anion decomposition precedes salt dissociation. The anion decomposition mechanisms are fully elucidated. Two of the typical solvents used in Li–S technology, 1,3-dioxolane and 1,2-dimethoxyethane, are found stable during the entire simulation length, in contrast with the case of ethylene carbonate that is rapidly decomposed by sequential 2- or 4-electron mechanisms. On the other hand, the fast reactivity of the soluble PS species alters the side reactions because the PS totally decomposes before any of the electrolyte components forming Li 2 S on the anode surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of the damping function in dispersion corrected density functional theory
Grimme, S., Ehrlich, S., & Goerigk, L. (2011) · Journal of Computational Chemistry · doi:10.1002/jcc.21759 · Cited by 28,221
A fast and robust algorithm for Bader decomposition of charge density
Henkelman, G., Arnaldsson, A., & Jónsson, H. (2006) · Computational Materials Science · doi:10.1016/j.commatsci.2005.04.010 · Cited by 10,723
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Density Functional Theory: A Practical Introduction
Sholl, D. S., & Steckel, J. A. (2009) · doi:10.1002/9780470447710 · Cited by 688
Cited by
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Localized high concentration electrolyte behavior near a lithium–metal anode surface
Zheng, Y., Soto, F. A., Ponce, V., Seminario, J. M., Cao, X., Zhang, J.-G., & Balbuena, P. B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08935g · Cited by 123
Self-citation
Metadata
- Authors
- Camacho-Forero, L. E., Smith, T. W., Bertolini, S., & Balbuena, P. B.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-19
- Volume
- 119
- Issue
- 48
- Pages
- 26828-26839
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2287448044
- Cited by
- 166
- References
- 4
- FWCI
- 7.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.