The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
PTFE Tribology and the Role of Mechanochemistry in the Development of Protective Surface Films
Abstract
The wear and friction behavior of ultralow wear polytetrafluoroethylene (PTFE)/α-alumina composites first described by Burris and Sawyer in 2006 has been heavily studied, but the mechanisms responsible for the 4 orders of magnitude improvement in wear over unfilled PTFE are still not fully understood. It has been shown that the formation of a polymeric transfer film is crucial to achieving ultralow wear on a metal countersurface. However, the detailed chemical mechanism of transfer film formation and its role in the exceptional wear performance has yet to be described. There has been much debate about the role of chemical interactions between the PTFE, the filler, and the metal countersurface, and some researchers have even concluded that chemical changes are not an important part of the ultralow wear mechanism in these materials. Here, a “stripe” test allowed detailed spectroscopic studies of PTFE/α-alumina transfer films in various stages of development, which led to a proposed mechanism which accounts for the creation of chemically distinct films formed on both surfaces of the wear couple. PTFE chains are broken during sliding and undergo a series of reactions to produce carboxylate chain ends, which have been shown to chelate to both the metal surface and to the surface of the alumina filler particles. These tribochemical reactions form a robust polymer-on-polymer system that protects the steel countersurface and is able to withstand hundreds of thousands of cycles of sliding with almost no wear of the polymer composite after the initial run-in period. The mechanical scission of carbon–carbon bonds in the backbone of PTFE under conditions of sliding contact is supported mathematically using the Hamaker model for van der Waals interactions between polymer fibrils and the countersurface. The necessity for ambient moisture and oxygen is explained, and model experiments using small molecules confirm the reactions in the proposed mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Contact and Rubbing of Flat Surfaces
Archard, J. F. (1953) · Journal of Applied Physics · doi:10.1063/1.1721448 · Cited by 7,892
Wittmann, J. C., & Smith, P. (1991) · Nature · doi:10.1038/352414a0 · Cited by 595
The p K a Values of PFOA and Other Highly Fluorinated Carboxylic Acids
Goss, K.-U. (2008) · Environmental Science & Technology · doi:10.1021/es702192c · Cited by 471
Handbook of Polymer Synthesis: Second Edition
(2004) · CRC Press eBooks · doi:10.1201/9781420030594 · Cited by 409
(2005) · Choice Reviews Online · doi:10.5860/choice.42-6499 · Cited by 269
Improved wear resistance in alumina-PTFE nanocomposites with irregular shaped nanoparticles
Burris, D. L., & Sawyer, W. G. (2005) · Wear · doi:10.1016/j.wear.2005.06.009 · Cited by 263
Self-citationPianca, M., Barchiesi, E., Esposto, G., & Radice, S. (1999) · Journal of Fluorine Chemistry · doi:10.1016/s0022-1139(98)00304-2 · Cited by 207
Tribological Sensitivity of PTFE/Alumina Nanocomposites to a Range of Traditional Surface Finishes
Burris, D. L., & Sawyer, W. G. (2005) · Tribology Transactions · doi:10.1080/05698190590923842 · Cited by 141
Self-citationThe Difficulty of Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements
Schmitz, T. L., Action, J. E., Ziegert, A. J. C., & Sawyer, W. G. (2005) · Journal of Tribology · doi:10.1115/1.1843853 · Cited by 141
Self-citationMechanistic Studies in Friction and Wear of Bulk Materials
Sawyer, W. G., Argibay, N., Burris, D. L., & Krick, B. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113533 · Cited by 139
Self-citationWear-Rate Uncertainty Analysis
Schmitz, T. L., Action, J. E., Burris, D. L., Ziegert, J. C., & Sawyer, W. G. (2004) · Journal of Tribology · doi:10.1115/1.1792675 · Cited by 116
Self-citationA route to wear resistant PTFE via trace loadings of functionalized nanofillers
Burris, D. L., Zhao, S., Duncan, R. K., Lowitz, J., Perry, S. S., Schadler, L. S., & Sawyer, W. G. (2009) · Wear · doi:10.1016/j.wear.2008.12.116 · Cited by 109
Self-citationIonic Liquid Nanotribology: Stiction Suppression and Surface Induced Shear Thinning
Álvarez-Asencio, R., Cranston, E. D., Atkin, R., & Rutland, M. W. (2012) · Langmuir · doi:10.1021/la3010807 · Cited by 68
Characterization of friction‐deposited polytetrafluoroethylene transfer films
Fenwick, D., Ihn, K. J., Motamedi, F., Wittmann, J. C., & Smith, P. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070500705 · Cited by 44
The Third Body Concept Interpretation of Tribological Phenomena
Dowson, D. (1996) · Tribology series · doi:10.1016/s0167-8922(08)x7023-3 · Cited by 35
Lauer, J. L., Bunting, B. G., & Jones, W. (1988) · Tribology Transactions · doi:10.1080/10402008808981824 · Cited by 29
Cited by
Fluorinated Polymers as Smart Materials for Advanced Biomedical Applications
Cardoso, V., Correia, D., Ribeiro, C., Fernandes, M., & Lanceros-Méndez, S. (2018) · Polymers · doi:10.3390/polym10020161 · Cited by 286
Metadata
- Authors
- Harris, K. L., Pitenis, A. A., Sawyer, W. G., Krick, B. A., Blackman, G. S., Kasprzak, D. J., & Junk, C. P.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-26
- Volume
- 48
- Issue
- 11
- Pages
- 3739-3745
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2514472918
- Cited by
- 326
- References
- 16
- FWCI
- 17.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.