The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Mechanical and Structural Characterization of Semicrystalline Polyethylene under Tensile Deformation by Molecular Dynamics Simulations
Open accessAbstract
We have studied tensile deformations of semicrystalline polyethylene (PE) with molecular dynamics simulations at two different strain rates and temperatures. Compared to earlier studies, the modeled systems were approximately 5 times larger, which allowed significantly larger strains up to about 120% to be examined. Two different modes of structural transformation of semicrystalline PE were observed at the higher temperature of 350 K, depending on the strain rate. At the faster strain rate of 5 × 10 7 s –1, cavitation in the noncrystalline region dominated, with little change in the crystalline region, resulting in monotonically declining stress with increasing strain after the yield point. However, in a small number of cases, significant deviations from the average stress–strain profile were observed that correlated with topological constraints, such as bridges and bridging entanglements connecting crystalline regions separated by the noncrystalline region, and destabilization of the crystalline region. At the slower strain rate of 5 × 10 6 s –1, we observed repeated melting/recrystallization events and significant oscillations in stress associated with variations of density in crystalline and noncrystalline regions and the displacement of polymer chains from crystalline to noncrystalline regions. When averaged over an ensemble of starting configurations for semicrystalline PE, the oscillations were found to be less coherent from microstate to microstate and offset one another. The postyield stress became notably smoother and began to resemble the plastic flow observed macroscopically, followed by stress hardening at the later stage of deformation. At the lower temperature of 250 K, cavity formation was the only mechanism observed, for both strain rates. The interplay between the thermodynamic stability of the crystalline region and the topological constraints imposed by bridges and entanglements in the noncrystalline region is crucial to understanding structural transformations of semicrystalline PE during tensile deformations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The entanglement analysis methods that use pure geometrical criteria are quicker [62] and more proper [27] than other methods when inhomogeneous semicrystalline systems such as those in this study are to be considered.”
From Molecular dynamics simulation of linear polyethylene blends: Effect of molar mass bimodality on topological characteristics and mechanical behavior (2019) · cites this paper as [27]
In the citing paper
“The model systems were sufficiently large to provide statistically reliable results and avoid finite-size issues [27], and they were computationally affordable for the equilibration, cooling and tensile deformation simulations.”
From Molecular dynamics simulation of linear polyethylene blends: Effect of molar mass bimodality on topological characteristics and mechanical behavior (2019) · cites this paper as [27]
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Sun, H. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp980939v · Cited by 6,001
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Rapid estimation of elastic constants by molecular dynamics simulation under constant stress
Shinoda, W., Shiga, M., & Mikami, M. (2004) · Physical Review B · doi:10.1103/physrevb.69.134103 · Cited by 1,287
A note on single crystals in polymers: Evidence for a folded chain configuration
Keller, A. (1957) · Philosophical Magazine · doi:10.1080/14786435708242746 · Cited by 1,019
Rheology and microscopic topology of entangled polymeric liquids
Everaers, R., Sukumaran, S. K., Grest, G. S., Svaneborg, C., Sivasubramanian, A., & Kremer, K. (2004) · Science · doi:10.1126/science.1091215 · Cited by 832
Strength and toughness of crystalline polymer systems
Galeski, A. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.09.003 · Cited by 614
Structure and plastic deformation of polyethylene
Lin, L., & Argon, A. S. (1994) · Journal of Materials Science · doi:10.1007/bf01162485 · Cited by 574
Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C., & Adharapurapu, R. R. (2006) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.06.040 · Cited by 570
On the Morphology of the Crystalline State in Polymers
Flory, P. J. (1962) · Journal of the American Chemical Society · doi:10.1021/ja00874a004 · Cited by 510
Cited by
Modeling and Simulations of Polymers: A Roadmap
Gartner, T. E., & Jayaraman, A. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b01836 · Cited by 548
Polymer informatics: Current status and critical next steps
Chen, L., Pilania, G., Batra, R., Huan, T. D., Kim, C., Kuenneth, C., & Ramprasad, R. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100595 · Cited by 272
The Tough Journey of Polymer Crystallization: Battling with Chain Flexibility and Connectivity
Tang, X., Chen, W., & Li, L. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b02725 · Cited by 215
Xu, S., Zhou, J., & Pan, P. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101676 · Cited by 166
Kröger, M., Dietz, J. D., Hoy, R. S., & Luap, C. (2022) · Computer Physics Communications · doi:10.1016/j.cpc.2022.108567 · Cited by 155
Metadata
- Authors
- Yeh, I.-C., Andzelm, J. W., & Rutledge, G. C.
- Affiliations
- DEVCOM Army Research Laboratory (US)
- Massachusetts Institute of Technology (US)
- Corresponding author
- Andzelm, Jan W.
- Rutledge, Gregory C.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-06-15
- Volume
- 48
- Issue
- 12
- Pages
- 4228-4239
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2513061957
- Cited by
- 146
- References
- 43
- Citations by year
- 2026: 12 · 2025: 10 · 2024: 11 · 2023: 17 · 2022: 15 · 2021: 15 · 2020: 13 · 2019: 15 · 2018: 15 · 2017: 14 · 2016: 9
- FWCI
- 8.12
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- cc-by-nc
- Locations
- Macromolecules (publishedVersion)
- DSpace@MIT (Massachusetts Institute of Technology) (submittedVersion, cc-by-nc)
- Funders
- U.S. Department of Energy
- U.S. Army Research Laboratory
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Keywords
- semicrystalline polyethylene, tensile deformation, strain rate sensitivity, cavitation, melting and recrystallization, stress oscillations, topological constraints, stress hardening
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical and Structural Characterization of Semicrystalline Polyethylene under Tensile Deformation by Molecular Dynamics Simulations. https://app.cochat.ai/papers/10.1021/acs.macromol.5b00697
- The paper
- Yeh, I.-C., Andzelm, J. W., & Rutledge, G. C. (2015). Mechanical and Structural Characterization of Semicrystalline Polyethylene under Tensile Deformation by Molecular Dynamics Simulations. Macromolecules. https://doi.org/10.1021/acs.macromol.5b00697
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.