Avoidance of Density Anomalies as a Structural Principle for Semicrystalline Polymers: The Importance of Chain Ends and Chain Tilt
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
On the basis of sufficiently realistic chain models and simulations, it is concluded that the commonly used models of the lamellar structure of melt-crystallized semicrystalline polymers unintentionally but inevitably contain layers with a higher density than in the crystallites (density anomalies). The density excess would be particularly pronounced in polymers with planar zigzag conformations in the crystallites, such as polyethylene (PE). To avoid density anomalies, the structural models must be modified, with chain ends at the crystal surface and/or chain tilt in the crystallites. NMR and X-ray evidence for these structural features in PE is presented. Termination of chains at the crystal surface keeps dangling chain ends out of the crowded interfacial layer, reducing the density at the interface by about 17% for M n = 15 kg/mol, a common value in commercial high-density polyethylenes. NMR of PEs shows that most CH 3 end groups are indeed in all-trans chains in a nearly solid-like environment. When the ends of polydisperse polymers are trapped at the crystal surface, many chain folds cannot be tight, in agreement with NMR showing fast trans–gauche isomerization even for solution crystals of PE. We propose that for polydisperse PE, interfacial chain ends are required for the formation of regular stacks of flat melt-crystallized lamellae without extreme chain tilt or density anomalies. Chain tilt in the crystallites, which decreases the area density of chains emerging from the crystal surface, is another indispensable structural adjustment in PE that reduces excess noncrystalline density; it has occasionally been reported but was usually considered as incidental. For instance, in X-ray analyses of PEs, chain tilt was ignored, and differential broadening of the ( hk 0) Bragg peaks was mistakenly attributed to mosaicity, in extreme cases resulting in the assumption of overly thick, rod-shaped rather than lamellar crystallites. For various oriented PE samples, including blown films and annealed fibers, published scattering patterns exhibit clear evidence of macroscopically aligned lamellar stacks with pronounced chain tilt. Literature data for PE also show examples of the increasing importance of chain tilt at high molecular weights, where the density reduction by chain ends is minor and evidence of extreme chain tilts of up to 60° has been shown. Alternatively, when chain-end concentrations are very low, the assumption of wide regularly stacked lamellae may have to be given up in favor of ribbon-shaped crystallites. The interplay of the density effects of chain ends and chain tilt can explain many molecular-weight-dependent structural features in polyethylene. On the basis of the combined effects of chain ends at the crystal surface, chain tilt in the crystallites, and adjacent reentry of ∼1/3 of chains, we can construct a lamellar model of PE without density anomalies. Chain tilt and chain ends at the crystal surface are required to “make space” for short loops, in conjunction with noncrystalline chain segments emerging from the crystal roughly along the surface normal. These four effects together enable a structure without density anomalies. In solution crystals, the absence of tie molecules and long loops, which produce a more extensive density increase than short loops, reduces the crowding problem and allows for lamellar crystals (with strongly tilted chains) even without chain ends, e.g., at ultrahigh molecular weights. In poly(ethylene oxide) and other polymers with helical conformations in the crystallites, the higher density along the chain axis associated with greater bond tilt angles in the crystal reduces the problem of amorphous excess density relative to Flory’s prediction and thus the need for chain tilt in the crystallites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Keller, A. (1968) · Reports on Progress in Physics · doi:10.1088/0034-4885/31/2/304 · Cited by 411
Long Periods in Drawn Polyethylene
Fischer, E. W., & Schmidt, G. F. (1962) · Angewandte Chemie International Edition in English · doi:10.1002/anie.196204881 · Cited by 110
Research works printed but not linked: 103
- 10.1021/ja00874a004 · DOI · Paper page
- Fischer E. W., 1967, Colloid Polym. Sci., 218, 97
- 10.1038/272226a0 · DOI · Paper page
- 10.1021/ma60076a001 · doi:10.1021/ma60076a001
- 10.1016/0032-3861(80)90288-8 · DOI
- Baltá-Calleja, F. J.; Vonk, C. G.InX-Ray Scattering of Synthetic Polymers;Jenkins, A. D., Ed.Elsevier:New York, 1989; pp215–303.
- 10.1021/ar00179a006 · DOI · Paper page
- 10.1007/BF00657404 · doi:10.1007/bf00657404
- Young R. J., 1991, Introduction to Polymers, 10.1007/978-1-4899-3176-4 · doi:10.1007/978-1-4899-3176-4
- 10.1021/ma00019a011 · DOI · Paper page
- Peacock A. J., 2000, Handbook of Polyethylene: Structures: Properties, and Applications, 10.1201/9781482295467 · DOI · Paper page
- Sperling L. H., 2006, Introduction of Physical Polymer Science
- 10.1080/14786436108235888 · DOI
- 10.1039/dc9796800007 · DOI
- 10.1039/dc9796800263 · DOI
- 10.1021/ma00134a055 · DOI · Paper page
- 10.1021/ma00081a005 · doi:10.1021/ma00081a005
- Strobl G., 1996, The Physics of Polymers, 10.1007/978-3-662-03243-5 · DOI · Paper page
- 10.1021/ma0012503 · DOI · Paper page
- 10.1016/j.polymer.2005.05.160 · DOI
- 10.1021/ma070518o · doi:10.1021/ma070518o
- 10.1021/acsmacrolett.6b00040 · DOI
- 10.1021/ma5025736 · DOI
- Gedde U. W., 1995, Polymer Physics
- 10.1107/S0021889880011478 · DOI · Paper page
- 10.1021/ma00118a036 · DOI
- 10.1002/pol.1967.110050803 · DOI
- Sadler D. M., 1979, Faraday Discuss. Chem. Soc., 68, 106, 10.1039/dc9796800491 · doi:10.1039/dc9796800491
- 10.1039/dc9796800297 · DOI
- 10.1016/0032-3861(80)90136-6 · doi:10.1016/0032-3861(80)90136-6
- 10.1126/science.229.4711.386 · DOI · Paper page
- 10.1295/polymj.29.534 · DOI
- 10.1016/S0016-7037(01)00568-3 · DOI
- 10.1016/j.bbamem.2013.03.028 · DOI
- 10.1016/0022-2364(77)90016-6 · DOI · Paper page
- 10.1016/S1090-7807(03)00082-X · DOI · Paper page
- 10.1016/0022-2364(78)90288-3 · DOI · Paper page
- 10.1021/ma00038a037 · DOI · Paper page
- 10.1063/1.1727249 · DOI
- 10.1063/1.1746878 · DOI
- 10.1021/jp981753z · doi:10.1021/jp981753z
- Abragam, A.InThe Principles of Nuclear Magnetism;Oxford University Press:Oxford, 1961; p120.
- 10.1021/ja00330a010 · doi:10.1021/ja00330a010
- 10.1007/978-3-642-00219-9_37 · doi:10.1007/978-3-642-00219-9_37
- Guinier A., 1994, X-Ray Diffraction: In Crystals, Imperfect Crystals, and Amorphous Bodies
- 10.1002/pol.1970.160080205 · DOI · Paper page
- 10.1039/tf9555100848 · DOI · Paper page
- 10.1021/ma00161a020 · DOI
- 10.1002/polb.1987.090250807 · DOI
- 10.1021/ma60070a045 · doi:10.1021/ma60070a045
- 10.1016/j.ssnmr.2005.09.008 · doi:10.1016/j.ssnmr.2005.09.008
- 10.1021/ma402232c · doi:10.1021/ma402232c
- 10.1002/pol.1967.160050601 · doi:10.1002/pol.1967.160050601
- 10.1016/j.ssnmr.2003.08.002 · DOI
- 10.1098/rspa.1981.0113 · DOI · Paper page
- 10.1134/S1811238211050018 · doi:10.1134/s1811238211050018
- 10.1021/ma500691k · DOI
- 10.1098/rspa.1981.0114 · DOI · Paper page
- 10.1002/pol.1981.180191109 · DOI
- 10.1002/pol.1984.180221105 · DOI
- 10.1080/14786436308207334 · DOI
- 10.1080/14786436308207335 · DOI
- 10.1007/BF00752220 · DOI
- 10.1007/BF00757913 · DOI
- 10.1007/BF00549783 · DOI
- Khoury F., 1979, Faraday Discuss. Chem. Soc., 68, 404
- 10.1002/pol.1980.180181204 · DOI
- 10.1021/ma00133a011 · DOI · Paper page
- 10.1002/polb.1989.090270501 · doi:10.1002/polb.1989.090270501
- 10.1021/ma00223a034 · doi:10.1021/ma00223a034
- 10.1021/ma960634j · DOI · Paper page
- 10.1021/ma071590p · DOI
- 10.1002/anie.201102814 · doi:10.1002/anie.201102814
- 10.1081/MB-120017116 · DOI
- 10.3891/acta.chem.scand.33a-0199 · doi:10.3891/acta.chem.scand.33a-0199
- 10.1007/BF01507523 · doi:10.1007/bf01507523
- 10.1016/0032-3861(84)90246-5 · doi:10.1016/0032-3861(84)90246-5
- 10.1002/polb.20778 · doi:10.1002/polb.20778
- 10.1021/ma0513517 · DOI
- 10.1021/ma00134a056 · DOI
- 10.1002/pol.1986.140240702 · doi:10.1002/pol.1986.140240702
- 10.1002/pol.1982.180200103 · DOI
- 10.1080/00222346708212739 · DOI · Paper page
- 10.1007/BF01761113 · doi:10.1007/bf01761113
- 10.1021/ma9464229 · doi:10.1021/ma9464229
- 10.1021/ma970519o · DOI · Paper page
- 10.1021/ma00020a009 · doi:10.1021/ma00020a009
- 10.1007/BF02086844 · doi:10.1007/bf02086844
- 10.1007/BF00549719 · DOI · Paper page
- 10.1021/ma702815k · DOI
- 10.1002/polb.1994.090320819 · doi:10.1002/polb.1994.090320819
- 10.1021/ma00050a001 · DOI
- 10.1021/jp512246d · doi:10.1021/jp512246d
- 10.1080/00222340802403263 · doi:10.1080/00222340802403263
- 10.1126/science.1075401 · DOI · Paper page
- 10.1021/ma102838c · DOI
- 10.1016/S0032-3861(96)00485-5 · doi:10.1016/s0032-3861(96)00485-5
- 10.1039/C6SM01622G · DOI
- 10.1021/ma00223a018 · DOI
- 10.1021/ma980261h · DOI
- 10.1021/ma200667m · DOI · Paper page
- 10.1021/ma981138t · DOI · Paper page
- Schmidt-Rohr K., 1994, Multidimensional Solid-State NMR and Polymers
Cited by
Kurz, R., Schulz, M., Scheliga, F., Men, Y., Seidlitz, A., Thurn-Albrecht, T., & Saalwächter, K. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00809 · Cited by 86
Sliozberg, Y. R., Yeh, I.-C., Kröger, M., Masser, K. A., Lenhart, J. L., & Andzelm, J. W. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01538 · Cited by 79
Molecular-Scale Understanding of the Embrittlement in Polyethylene Ocean Debris
Garvey, C. J., Impéror-Clerc, M., Rouzière, S., Gouadec, G., Boyron, O., Rowenczyk, L., Mingotaud, A. F., & ter Halle, A. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c02095 · Cited by 65
Recent Progress in Understanding Polymer Crystallization
Saalwächter, K., Thurn‐Albrecht, T., & Paul, W. (2023) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202200424 · Cited by 55
Metadata
- Authors
- Fritzsching, K. J., Mao, K., & Schmidt-Rohr, K.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-07
- Volume
- 50
- Issue
- 4
- Pages
- 1521-1540
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2587607716
- Cited by
- 96
- References
- 2
- FWCI
- 6.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- ExxonMobil Research and Engineering Company
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Avoidance of Density Anomalies as a Structural Principle for Semicrystalline Polymers: The Importance of Chain Ends and Chain Tilt. https://app.cochat.ai/papers/10.1021/acs.macromol.6b02000
- The paper
- Fritzsching, K. J., Mao, K., & Schmidt-Rohr, K. (2017). Avoidance of Density Anomalies as a Structural Principle for Semicrystalline Polymers: The Importance of Chain Ends and Chain Tilt. Macromolecules. https://doi.org/10.1021/acs.macromol.6b02000
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.