Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 170

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Highly-Toughened Polylactide- (PLA-) Based Ternary Blends with Significantly Enhanced Glass Transition and Melt Strength: Tailoring the Interfacial Interactions, Phase Morphology, and Performance

Mehrabi Mazidi, Majid, Edalat, Arman, Berahman, Reyhaneh, Hosseini, Fatemeh Sadat · 2018 · Macromolecules

Abstract

The inherent shortcomings of polylactide (PLA) including brittleness, low glass transition temperature, and melt strength during processing were addressed through a facile melt blending of PLA with polybutadiene-g-poly­(styrene-co-acrylonitrile) (PB-g-SAN) core–shell impact modifier and poly­(methyl methacrylate) (PMMA). Highly tough PLA-based ternary blends with drastically enhanced glass transition temperature (≈ 21 °C) and melt strength were successfully prepared. The effect of PMMA content (ranging from 0 to 30 wt %) on the phase miscibility, morphology, mechanical properties, thermal behavior, rheological properties, and toughening mechanisms of PLA/PB-g-SAN/PMMA blends with 30% PB-g-SAN was systematically investigated. It was found that PMMA can effectively tune the interfacial interactions, phase morphology and performance of incompatible PLA/PB-g-SAN blend owing to its partial miscibility with PLA matrix and miscibility with SAN shell of PB-g-SAN, as evidenced by DMTA analysis. Increase in PMMA content promoted the phase adhesion and dispersion state of PB-g-SAN terpolymer in the blends and highly toughened blends were achieved which showed incomplete break of impact specimen. The significant effect of phase morphology on imparting tremendous improvement in impact toughness was clarified. The maximum impact strength (about 500 J/m), elongation-at-break and glass transition were obtained for ternary blend with 25% PMMA. The PLA crystallinity was gradually suppressed in ternary blends upon progressive increase in PMMA content. Rheological studies showed solid-like behavior with enhanced viscosities for ternary blends. Micromechanical deformations and toughening mechanisms were studied by post-mortem fractography. Massive matrix shear yielding was found as the main source of energy dissipation triggered by suitable interfacial adhesion and microvoid formation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.macromol.8b00557

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

Metadata

Authors
Mehrabi Mazidi, M., Edalat, A., Berahman, R., & Hosseini, F. S.
Venue
Macromolecules
Published
2018-05-30
Volume
51
Issue
11
Pages
4298-4314
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W2806447462
Cited by
170
References
4
FWCI
6.93
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.