The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Hot Electron-Based Near-Infrared Photodetection Using Bilayer MoS2
Abstract
Recently, there has been much interest in the extraction of hot electrons generated from surface plasmon decay, as this process can be used to achieve additional bandwidth for both photodetectors and photovoltaics. Hot electrons are typically injected into semiconductors over a Schottky barrier between the metal and semiconductor, enabling generation of photocurrent with below bandgap photon illumination. As a two-dimensional semiconductor single and few layer molybdenum disulfide (MoS2) has been demonstrated to exhibit internal photogain and therefore becomes an attractive hot electron acceptor. Here, we investigate hot electron-based photodetection in a device consisting of bilayer MoS2 integrated with a plasmonic antenna array. We demonstrate sub-bandgap photocurrent originating from the injection of hot electrons into MoS2 as well as photoamplification that yields a photogain of 10(5). The large photogain results in a photoresponsivity of 5.2 A/W at 1070 nm, which is far above similar silicon-based hot electron photodetectors in which no photoamplification is present. This technique is expected to have potential use in future ultracompact near-infrared photodetection and optical memory devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Graphene–MoS2 hybrid structures for multifunctional photoresponsive memory devices
Roy, K., Padmanabhan, M., Goswami, S., Sai, T. P., Ramalingam, G., Raghavan, S., & Ghosh, A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.206 · Cited by 1,436
Plasmonic Hot Electron Induced Structural Phase Transition in a MoS2 Monolayer
Kang, Y., Najmaei, S., Liu, Z., Bao, Y., Wang, Y., Zhu, X., Halas, N. J., Nordlander, P., Ajayan, P. M., Lou, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401802 · Cited by 599
Cited by
Recent Progress and Future Prospects of 2D‐Based Photodetectors
Huo, N., & Konstantatos, G. (2018) · Advanced Materials · doi:10.1002/adma.201801164 · Cited by 730
Photodetectors Based on Two‐Dimensional Layered Materials Beyond Graphene
Xie, C., Mak, C., Tao, X., & Yan, F. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201603886 · Cited by 705
Hybrid nanostructures of metal/two-dimensional nanomaterials for plasmon-enhanced applications
Li, X., Zhu, J., & Wei, B. (2016) · Chem. Soc. Rev. · doi:10.1039/c6cs00195e · Cited by 400
Recent Advances in Optoelectronic Devices Based on 2D Materials and Their Heterostructures
Cheng, J., Wang, C., Zou, X., & Liao, L. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800441 · Cited by 359
High‐Performance, Room Temperature, Ultra‐Broadband Photodetectors Based on Air‐Stable PdSe2
Liang, Q., Wang, Q., Zhang, Q., Wei, J., Lim, S. X., Zhu, R., Hu, J., Wei, W., Lee, C., Sow, C., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807609 · Cited by 351
Metadata
- Authors
- Wang, W., Klots, A., Prasai, D., Yang, Y., Bolotin, K. I., & Valentine, J.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-06
- Volume
- 15
- Issue
- 11
- Pages
- 7440-7444
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2280314308
- Cited by
- 232
- References
- 3
- FWCI
- 7.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hot Electron-Based Near-Infrared Photodetection Using Bilayer MoS2. https://app.cochat.ai/papers/10.1021/acs.nanolett.5b02866
- The paper
- Wang, W., Klots, A., Prasai, D., Yang, Y., Bolotin, K. I., & Valentine, J. (2015). Hot Electron-Based Near-Infrared Photodetection Using Bilayer MoS2. Nano Letters. https://doi.org/10.1021/acs.nanolett.5b02866
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.