The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Synthesis and Characterization of Pt–Ag Alloy Nanocages with Enhanced Activity and Durability toward Oxygen Reduction
Abstract
Engineering the elemental composition of metal nanocrystals offers an effective strategy for the development of catalysts or electrocatalysts with greatly enhanced activity. Herein, we report the synthesis of Pt–Ag alloy nanocages with an outer edge length of 18 nm and a wall thickness of about 3 nm. Such nanocages with a composition of Pt 19 Ag 81 could be readily prepared in one step through the galvanic replacement reaction between Ag nanocubes and a Pt(II) precursor. After 10 000 cycles of potential cycling in the range of 0.60–1.0 V as in an accelerated durability test, the composition of the nanocages changed to Pt 56 Ag 44, together with a specific activity of 1.23 mA cm –2 toward oxygen reduction, which was 3.3 times that of a state-of-the-art commercial Pt/C catalyst (0.37 mA cm –2 ) prior to durability testing. Density functional theory calculations attributed the increased activity to the stabilization of the transition state for breaking the O–O bond in molecular oxygen. Even after 30 000 cycles of potential cycling, the mass activity of the nanocages only dropped from 0.64 to 0.33 A mg –1 Pt, which was still about two times that of the pristine Pt/C catalyst (0.19 A mg –1 Pt ).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Improved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Self-citationWang, C., Daimon, H., Onodera, T., Koda, T., & Sun, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200800073 · Cited by 849
Wang, J. X., Inada, H., Wu, L., Zhu, Y., Choi, Y., Liu, P., Zhou, W.-P., & Adzic, R. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9067645 · Cited by 719
Cited by
Surface and Interface Control in Nanoparticle Catalysis
Xie, C., Niu, Z., Kim, D., Li, M., & Yang, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00220 · Cited by 864
Advances in noble metal (Ru, Rh, and Ir) doping for boosting water splitting electrocatalysis
Tian, L., Li, Z., Xu, X., & Zhang, C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta01108a · Cited by 344
Ultrafine Pt‐Based Nanowires for Advanced Catalysis
Xu, H., Shang, H., Wang, C., & Du, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000793 · Cited by 281
Metadata
- Authors
- Yang, X., Roling, L. T., Vara, M., Elnabawy, A. O., Zhao, M., Hood, Z. D., Bao, S., Mavrikakis, M., & Xia, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-26
- Volume
- 16
- Issue
- 10
- Pages
- 6644-6649
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2522850096
- Cited by
- 164
- References
- 5
- FWCI
- 7.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and Characterization of Pt–Ag Alloy Nanocages with Enhanced Activity and Durability toward Oxygen Reduction. https://app.cochat.ai/papers/10.1021/acs.nanolett.6b03395
- The paper
- Yang, X., Roling, L. T., Vara, M., Elnabawy, A. O., Zhao, M., Hood, Z. D., Bao, S., Mavrikakis, M., & Xia, Y. (2016). Synthesis and Characterization of Pt–Ag Alloy Nanocages with Enhanced Activity and Durability toward Oxygen Reduction. Nano Letters. https://doi.org/10.1021/acs.nanolett.6b03395
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.