The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Ag-Incorporated Organic–Inorganic Perovskite Films and Planar Heterojunction Solar Cells
Open accessAbstract
Abstract Controlled doping for adjustable material polarity and charge carrier concentration is the basis of semiconductor materials and devices, and it is much more difficult to achieve in ionic semiconductors (e.g., ZnO and GaN) than in covalent semiconductors (e.g., Si and Ge), due to the high intrinsic defect density in ionic semiconductors. The organic–inorganic perovskite material, which is frenetically being researched for applications in solar cells and beyond, is also an ionic semiconductor. Here we present the Ag-incorporated organic–inorganic perovskite films and planar heterojunction solar cells. Partial substitution of Pb2+ by Ag+ leads to improved film morphology, crystallinity, and carrier dynamics as well as shifted Fermi level and reduced electron concentration. Consequently, in planar heterojunction photovoltaic devices with inverted stacking structure, Ag incorporation results in an enhancement of the power conversion efficiency from 16.0% to 18.4% in MAPbI3 based devices and from 11.2% to 15.4% in MAPbI3–xClx based devices. Our work implies that Ag incorporation is a feasible route to adjust carrier concentrations in solution-processed perovskite materials in spite of the high concentration of intrinsic defects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Chu, L., Ahmad, W., Liu, W., Yang, J., Zhang, R., Sun, Y., Yang, J., & Li, X. (2019) · Nano-Micro Letters · doi:10.1007/s40820-019-0244-6 · Cited by 446
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Wu, S., Chen, R., Zhang, S., Babu, B. H., Yue, Y., Zhu, H., Yang, Z., Chen, C., Chen, W., Huang, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09167-0 · Cited by 380
Polymer Doping for High‐Efficiency Perovskite Solar Cells with Improved Moisture Stability
Jiang, J., Wang, Q., Jin, Z., Zhang, X., Lei, J., Bin, H., Zhang, Z., Li, Y., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701757 · Cited by 379
Metadata
- Authors
- Chen, Q., Chen, L., Ye, F., Zhao, T., Tang, F., Rajagopal, A., Jiang, Z., Jiang, S., Jen, A. K.-Y., Xie, Y., Cai, J., & Chen, L.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-06
- Volume
- 17
- Issue
- 5
- Pages
- 3231-3237
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2599607852
- Cited by
- 178
- References
- 3
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.