The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Thermal Stability and Explosive Hazard Assessment of Diazo Compounds and Diazo Transfer Reagents
Open accessAbstract
-ABSA). The Yoshida correlation is applied to DSC data for each diazo compound to provide an indication of both their impact sensitivity (IS) and explosivity. As a neat substance, none of the diazo compounds tested are predicted to be explosive, but many (particularly donor/acceptor diazo compounds) are predicted to be impact-sensitive. It is therefore recommended that manipulation, agitation, and other processing of neat diazo compounds are conducted with due care to avoid impacts, particularly in large quantities. The full dataset is presented to inform chemists of the nature and magnitude of hazards when using diazo compounds and diazo transfer reagents. Given the demonstrated potential for rapid heat generation and gas evolution, adequate temperature control and cautious addition of reagents that begin a reaction are strongly recommended when conducting reactions with diazo compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A survey of Hammett substituent constants and resonance and field parameters
Hansch, C., Leo, A., & Taft, R. W. (1991) · Chemical Reviews · doi:10.1021/cr00002a004 · Cited by 8,651
Catalytic C–H functionalization by metal carbenoid and nitrenoid insertion
Davies, H. M. L., & Manning, J. R. (2008) · Nature · doi:10.1038/nature06485 · Cited by 2,303
Organic Azides: An Exploding Diversity of a Unique Class of Compounds
Bräse, S., Gil, C., Knepper, K., & Zimmermann, V. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200400657 · Cited by 2,233
Modern Organic Synthesis with α-Diazocarbonyl Compounds
Ford, A., Miel, H., Ring, A., Slattery, C. N., Maguire, A. R., & McKervey, M. A. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00121 · Cited by 1,601
Catalytic X–H insertion reactions based on carbenoids
Gillingham, D., & Fei, N. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35496b · Cited by 594
Goddard-Borger, E. D., & Stick, R. V. (2007) · Organic Letters · doi:10.1021/ol701581g · Cited by 591
Rice, B. M., & Hare, J. J. (2002) · The Journal of Physical Chemistry A · doi:10.1021/jp012602q · Cited by 548
Generating carbyne equivalents with photoredox catalysis
Wang, Z., Herraiz, A. G., del Hoyo, A. M., & Suero, M. G. (2018) · Nature · doi:10.1038/nature25185 · Cited by 251
Diazo Compounds: Versatile Tools for Chemical Biology
Mix, K. A., Aronoff, M. R., & Raines, R. T. (2016) · ACS Chemical Biology · doi:10.1021/acschembio.6b00810 · Cited by 242
Taming Hazardous Chemistry in Flow: The Continuous Processing of Diazo and Diazonium Compounds
Deadman, B. J., Collins, S. G., & Maguire, A. R. (2015) · Chemistry – A European Journal · doi:10.1002/chem.201404348 · Cited by 186
Development of a Continuous Process for the Industrial Generation of Diazomethane1
Proctor, L. D., & Warr, A. J. (2002) · Organic Process Research & Development · doi:10.1021/op020049k · Cited by 151
Wei, Y., Tinoco, A., Steck, V., Fasan, R., & Zhang, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09171 · Cited by 150
Sperry, J. B., Minteer, C. J., Tao, J., et al. (2018) · Organic Process Research & Development · doi:10.1021/acs.oprd.8b00193 · Cited by 146
Sensitivities of Some Imidazole-1-sulfonyl Azide Salts
Fischer, N., Goddard‐Borger, E. D., Greiner, R., Klapötke, T. M., Skelton, B. W., & Stierstorfer, J. (2012) · The Journal of Organic Chemistry · doi:10.1021/jo202264r · Cited by 116
Cobalt(II)‐Catalyzed Asymmetric Olefin Cyclopropanation with α‐Ketodiazoacetates
Xu, X., Zhu, S., Cui, X., Wojtas, Ł., & Zhang, X. P. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201305883 · Cited by 111
The Generation of Diazo Compounds in Continuous‐Flow
Hock, K. J., & Koenigs, R. M. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201800136 · Cited by 85
Greb, A., Poh, J., Greed, S., Battilocchio, C., Pasau, P., Blakemore, D. C., & Ley, S. V. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201710445 · Cited by 78
Scalable in Situ Diazomethane Generation in Continuous-Flow Reactors
Rossi, E., Woehl, P., & Maggini, M. (2011) · Organic Process Research & Development · doi:10.1021/op200110a · Cited by 73
Mass Spectra and Appearance Potentials of Diazirine and Diazomethane
Paulett, G. S., & Ettinger, R. (1963) · The Journal of Chemical Physics · doi:10.1063/1.1734330 · Cited by 69
Boddy, A. J., Affron, D. P., Cordier, C. J., Rivers, E. L., Spivey, A. C., & Bull, J. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201812925 · Cited by 69
Self-citationKitamura, M., Kato, S., Yano, M., Tashiro, N., Shiratake, Y., Sando, M., & Okauchi, T. (2014) · Organic & Biomolecular Chemistry · doi:10.1039/c4ob00515e · Cited by 66
Chawner, S. J., Cases, M., & Bull, J. A. (2017) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201701030 · Cited by 62
Self-citationFields, R., & Tomlinson, J. P. (1979) · Journal of Fluorine Chemistry · doi:10.1016/s0022-1139(00)81083-0 · Cited by 52
On-Demand Generation and Consumption of Diazomethane in Multistep Continuous Flow Systems
Yang, H., Martin, B. R., & Schenkel, B. (2018) · Organic Process Research & Development · doi:10.1021/acs.oprd.7b00302 · Cited by 49
Taming tosyl azide: the development of a scalable continuous diazo transfer process
Deadman, B. J., O’Mahony, R. M., Lynch, D., Crowley, D. C., Collins, S. G., & Maguire, A. R. (2016) · Organic & Biomolecular Chemistry · doi:10.1039/c6ob00246c · Cited by 48
Nicolle, S. M., Hayes, C. J., & Moody, C. J. (2015) · Chemistry - A European Journal · doi:10.1002/chem.201500118 · Cited by 43
Gérardy, R., Winter, M., Vizza, A., & Monbaliu, J. M. (2016) · Reaction Chemistry & Engineering · doi:10.1039/c6re00184j · Cited by 39
C–H functionalisation of aldehydes using light generated, non-stabilised diazo compounds in flow
Dingwall, P., Greb, A., Crespin, L. N. S., Labes, R., Musio, B., Poh, J., Pasau, P., Blakemore, D. C., & Ley, S. V. (2018) · Chemical Communications · doi:10.1039/c8cc06202a · Cited by 32
Synthesis and Explosion Hazards of 4-Azido- l -phenylalanine
Richardson, M. B., Brown, D. B., Vásquez, C. A., Ziller, J. W., Johnston, K. M., & Weiss, G. A. (2018) · The Journal of Organic Chemistry · doi:10.1021/acs.joc.8b00270 · Cited by 28
Exploiting the Continuous in situ Generation of Mesyl Azide for Use in a Telescoped Process
O’Mahony, R. M., Lynch, D., Hayes, H. L. D., Thuama, E. N., Donnellan, P., Jones, R. C., Glennon, B., Collins, S. G., & Maguire, A. R. (2017) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201700871 · Cited by 26
Synthesis of Cyclic α-Diazo-β-keto Sulfoxides in Batch and Continuous Flow
McCaw, P. G., Buckley, N. M., Eccles, K. S., Lawrence, S. E., Maguire, A. R., & Collins, S. G. (2017) · The Journal of Organic Chemistry · doi:10.1021/acs.joc.7b00172 · Cited by 17
Research works printed but not linked: 115
- 10.1021/cr040677v · doi:10.1021/cr040677v
- 10.1021/cr050982w · doi:10.1021/cr050982w
- Stoessel F., 2008, Thermal Safety of Chemical Processes, 10.1002/9783527621606 · doi:10.1002/9783527621606
- 10.1021/acs.joc.8b02068 · doi:10.1021/acs.joc.8b02068
- 10.1002/chem.201902036 · doi:10.1002/chem.201902036
- Klapötke T. M., 2015, Chemistry of High-Energy Materials, 10.1515/9783110439335 · doi:10.1515/9783110439335
- Matyáš R., 2012, Primary Explosives
- 10.1080/10629369308028824 · doi:10.1080/10629369308028824
- 10.1039/C7CE01914A · doi:10.1039/c7ce01914a
- Frurip D. J., 2012, Chem. Eng. News, 12, 1287
- Weaver M., 2016, Proceedings of the 19th Seminar on New Trends in Research of Energetic Materials, Part 2, 1037
- 10.1016/j.jhazmat.2004.06.022 · doi:10.1016/j.jhazmat.2004.06.022
- Yoshida T., 1987, Kogyo Kayaku, 48, 311
- 10.1021/acs.joc.9b00269 · doi:10.1021/acs.joc.9b00269
- 10.1021/cr00028a010 · doi:10.1021/cr00028a010
- 10.1039/C6CC01958G · doi:10.1039/c6cc01958g
- 10.1039/C8OB02703J · doi:10.1039/c8ob02703j
- 10.1021/cr010007e · doi:10.1021/cr010007e
- 10.1039/b309046a · doi:10.1039/b309046a
- Davies H. M. L., 2001, Organic Reactions, 57, 1
- 10.1002/anie.200905573 · doi:10.1002/anie.200905573
- 10.1021/ja201237j · doi:10.1021/ja201237j
- 10.1021/acs.oprd.8b00214 · doi:10.1021/acs.oprd.8b00214
- 10.1021/ja00074a012 · doi:10.1021/ja00074a012
- 10.1021/ja9604931 · doi:10.1021/ja9604931
- 10.1039/C39810000688 · doi:10.1039/c39810000688
- 10.1021/cr0200217 · doi:10.1021/cr0200217
- 10.1039/c0cs00217h · doi:10.1039/c0cs00217h
- 10.1021/ja513275c · doi:10.1021/ja513275c
- 10.1021/acs.chemrev.7b00382 · doi:10.1021/acs.chemrev.7b00382
- 10.1021/ja994136c · doi:10.1021/ja994136c
- 10.1021/ol0157858 · doi:10.1021/ol0157858
- 10.1038/s41586-018-0799-2 · doi:10.1038/s41586-018-0799-2
- 10.1002/anie.201105485 · doi:10.1002/anie.201105485
- 10.1021/acs.joc.6b02998 · doi:10.1021/acs.joc.6b02998
- 10.1016/j.tet.2013.01.020 · doi:10.1016/j.tet.2013.01.020
- 10.1016/S0040-4039(00)93616-5 · doi:10.1016/s0040-4039(00)93616-5
- 10.1021/ja00412a048 · doi:10.1021/ja00412a048
- 10.1002/anie.201408928 · doi:10.1002/anie.201408928
- 10.1039/C5CC05740J · doi:10.1039/c5cc05740j
- 10.1021/acs.joc.6b02134 · doi:10.1021/acs.joc.6b02134
- 10.1002/anie.201502484 · doi:10.1002/anie.201502484
- 10.1002/anie.201511433 · doi:10.1002/anie.201511433
- 10.1039/C7CC02650A · doi:10.1039/c7cc02650a
- 10.1021/jo0268409 · doi:10.1021/jo0268409
- 10.1021/jo201042c · doi:10.1021/jo201042c
- 10.1055/s-0031-1290772 · doi:10.1055/s-0031-1290772
- 10.1002/ejoc.201600947 · doi:10.1002/ejoc.201600947
- 10.1002/ejoc.201501027 · doi:10.1002/ejoc.201501027
- Simpson J. H., 2014, Managing Hazardous Reactions and Compounds in Process Chemistry, 235, 10.1021/bk-2014-1181.ch009 · doi:10.1021/bk-2014-1181.ch009
- 10.15227/orgsyn.036.0016 · doi:10.15227/orgsyn.036.0016
- 10.1021/j150323a030 · doi:10.1021/j150323a030
- 10.1002/1521-3773(20010417)40:8<1430::AID-ANIE1430>3.0.CO;2-W · doi:10.1002/1521-3773(20010417)40:8<1430::aid-anie1430>3.0.co;2-w
- 10.1021/ja01073a029 · doi:10.1021/ja01073a029
- 10.1021/ja01601a085 · doi:10.1021/ja01601a085
- 10.1002/ejoc.201501027 · doi:10.1002/ejoc.201501027
- 10.1021/jo00917a031 · doi:10.1021/jo00917a031
- 10.1016/S0040-6031(01)00761-4 · doi:10.1016/s0040-6031(01)00761-4
- 10.1016/S0040-6031(01)00760-2 · doi:10.1016/s0040-6031(01)00760-2
- 10.1002/anie.201814123 · doi:10.1002/anie.201814123
- Meyer R., 2007, Explosives, 10.1002/9783527617043 · doi:10.1002/9783527617043
- 10.1016/0040-6031(86)85245-5 · doi:10.1016/0040-6031(86)85245-5
- 10.1002/chem.201101590 · doi:10.1002/chem.201101590
- 10.1002/chem.201500416 · doi:10.1002/chem.201500416
- 10.1021/acs.oprd.5b00308 · doi:10.1021/acs.oprd.5b00308
- 10.1002/cber.189402702141 · doi:10.1002/cber.189402702141
- 10.1002/0471264180.or008.08 · doi:10.1002/0471264180.or008.08
- 10.1039/C6OB00715E · doi:10.1039/c6ob00715e
- 10.1016/0040-4020(95)00210-Y · doi:10.1016/0040-4020(95)00210-y
- 10.1016/S0040-4039(02)01443-0 · doi:10.1016/s0040-4039(02)01443-0
- 10.1021/ja0459779 · doi:10.1021/ja0459779
- 10.1002/anie.201000787 · doi:10.1002/anie.201000787
- 10.1126/science.1218781 · doi:10.1126/science.1218781
- 10.1021/jo202214e · doi:10.1021/jo202214e
- 10.1016/S0040-4039(00)01856-6 · doi:10.1016/s0040-4039(00)01856-6
- 10.1002/ejoc.200400700 · doi:10.1002/ejoc.200400700
- 10.1021/ol070515w · doi:10.1021/ol070515w
- 10.1021/ol500267w · doi:10.1021/ol500267w
- 10.1021/jacs.6b09674 · doi:10.1021/jacs.6b09674
- 10.1002/chem.201605335 · doi:10.1002/chem.201605335
- 10.1039/C8CC07060A · doi:10.1039/c8cc07060a
- 10.1021/jacs.8b05946 · doi:10.1021/jacs.8b05946
- Regitz M., 1986, Diazo Compounds—Properties and Synthesis
- 10.1039/jr9520004735 · doi:10.1039/jr9520004735
- 10.1002/anie.201608444 · doi:10.1002/anie.201608444
- 10.1002/chem.201304656 · doi:10.1002/chem.201304656
- 10.1002/tcr.201600118 · doi:10.1002/tcr.201600118
- 10.1021/acs.joc.8b01587 · doi:10.1021/acs.joc.8b01587
- 10.15227/orgsyn.073.0144 · doi:10.15227/orgsyn.073.0144
- 10.1002/anie.197200441 · doi:10.1002/anie.197200441
- 10.1021/ol2007555 · doi:10.1021/ol2007555
- 10.1021/jo00795a052 · doi:10.1021/jo00795a052
- Katritzky A. R., 2012, Chem. Eng. News, 90, 4, 10.1021/cen-09045-letters · doi:10.1021/cen-09045-letters
- 10.1080/00397918108065754 · doi:10.1080/00397918108065754
- 10.1016/0040-6031(94)85051-8 · doi:10.1016/0040-6031(94)85051-8
- 10.1055/s-1996-5440 · doi:10.1055/s-1996-5440
- 10.1039/B707931C · doi:10.1039/b707931c
- Nikolaev V. A., 2015, EEROS Encyclopedia of Reagents for Organic Synthesis, 2, 1
- 10.1021/ja01037a016 · doi:10.1021/ja01037a016
- Balabanov G. P., 1968, J. Appl. Chem. USSR (Zh. Prikl. Khim.), 41, 2578
- 10.1080/00397918708063988 · doi:10.1080/00397918708063988
- 10.1016/j.tetlet.2018.11.051 · doi:10.1016/j.tetlet.2018.11.051
- 10.1021/ja01606a021 · doi:10.1021/ja01606a021
- 10.1039/P19800001512 · doi:10.1039/p19800001512
- 10.1021/jo005738d · doi:10.1021/jo005738d
- 10.1021/jo101296s · doi:10.1021/jo101296s
- 10.1021/jo301529b · doi:10.1021/jo301529b
- 10.1002/047084289X.rn00114.pub2 · doi:10.1002/047084289x.rn00114.pub2
- 10.1039/p19940002077 · doi:10.1039/p19940002077
- 10.1021/jo5025909 · doi:10.1021/jo5025909
- 10.1246/bcsj.47.2825 · doi:10.1246/bcsj.47.2825
- 10.1080/00304948109356105 · doi:10.1080/00304948109356105
- 10.1021/ed400002t · doi:10.1021/ed400002t
- Berger, A.; Wehrstedt, K. D. In Azodicarboxylates: Explosive Properties and Thermal Hazards , Mary Kay O’Connor Process Safety Center 12th Annual Symposium “Beyond Regulatory Compliance: Making Safety Second Nature”; Texas A&M, 2009; pp 192–202.
- 10.1021/op9901801 · doi:10.1021/op9901801
Cited by
Varró, N., Mándityné Huszka, B., Erdei, E., Mándoki, A., & Mándity, I. M. (2025) · Chemistry–Methods · doi:10.1002/cmtd.202500010 · Cited by 8
Metadata
- Authors
- Green, S. P., Wheelhouse, K. M., Payne, A. D., Hallett, J. P., Miller, P. W., & Bull, J. A.
- Venue
- Organic Process Research & Development
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-28
- Volume
- 24
- Issue
- 1
- Pages
- 67-84
- ISSN
- 1083-6160 (ISSN-L)
- 1520-586X
- OpenAlex
- W2991636900
- Cited by
- 363
- References
- 31
- FWCI
- 15.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.