Controlled Construction of Atomic Point Contact with 16 Quantized Conductance States in Oxide Resistive Switching Memory
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A resistive switching device with controlled formation and evolution of conductive filament possesses great capability of being miniaturized to atomic scale for the construction of high-density memory arrays and even in-memory computing architectures. Although the switching mechanism based on ion migration and electrochemistry has been clarified, precise control of the evolution dynamics is still a challenge that hinders the direct application of the memory devices. In this contribution, we propose an effective scanning probe microscope tip-assisted approach for the performance modulation of oxide-based resistive switching devices. The directional migration of oxygen anions inside the hafnium oxide nanofilm is regulated by using the voltage-biased scanning probe microscope (SPM) tip as a microelectrode, so that a single filament would be formed deliberately inside the switching matrix to greatly improve the stability and reliability of the memory device. The variations of the switching parameters, e.g. programming voltages and ON/OFF resistances, have been reduced by at least 33%. More importantly, the elaborate tuning of the filament dimension also gives rise to single atomic point contact in the resistive switching device, producing at least 16 half-integer multiples of quantized conductance states that can be used for multilevel data storage and high-order neuromorphic computing paradigm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chips are down for Moore’s law
Waldrop, M. M. (2016) · Nature · doi:10.1038/530144a · Cited by 2,397
Observation of electric-field induced Ni filament channels in polycrystalline NiOx film
Park, G.-S., Li, X.-S., Kim, D.-C., Jung, R.-J., Lee, M.-J., & Seo, S. (2007) · Applied Physics Letters · doi:10.1063/1.2813617 · Cited by 238
Celano, U., Goux, L., Degraeve, R., Fantini, A., Richard, O., Bender, H., Jurczak, M., & Vandervorst, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03078 · Cited by 186
Cited by
Artificial Neural Networks Based on Memristive Devices: From Device to System
Huang, H.-M., Wang, Z., Wang, T., Xiao, Y., & Guo, X. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000149 · Cited by 82
Kim, M., Kim, D.-E., Wang, Y., Lee, D., Lim, D.-H., Choi, H., Kymissis, I., Yang, J. J., Suh, J., Lee, H.-S., et al. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102204 · Cited by 24
Chen, Q., Han, T., Tang, M., Zhang, Z., Zheng, X., & Liu, G. (2020) · Micromachines · doi:10.3390/mi11040427 · Cited by 9
Self-citation
Metadata
- Authors
- Chen, Q., Liu, G., Xue, W., Shang, J., Gao, S., Yi, X., Lu, Y., Chen, X., Tang, M., Zheng, X., & Li, R.-W.
- Venue
- ACS Applied Electronic Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-04-24
- Volume
- 1
- Issue
- 5
- Pages
- 789-798
- ISSN
- 2637-6113 (ISSN-L)
- OpenAlex
- W2941033563
- Cited by
- 40
- References
- 3
- FWCI
- 1.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.