The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Highly Thermally Insulated and Superhydrophilic Corn Straw for Efficient Solar Vapor Generation
Abstract
Biomass-derived photothermal conversion materials are considered to be promising evaporator choices for cost-effective, sustainable, and environmentally friendly solar vapor generation. Herein we demonstrate a double-layer flamed straw, which is a typical solar-driven interfacial evaporator that can directly convert solar energy into heat and then localize heat at interface for vapor generation. Benefiting from the unique structure of a natural corn straw, the flamed straw exhibits a high solar absorbance of 91%, ultralow thermal conductivity (0.042 W m –1 K –1 ), and a sufficient water supply. Notably, the flamed-straw evaporator achieves a fast evaporation rate of 1.497 kg m –2 h –1 and a high photothermal efficiency of 86% under 1 sun illumination, showing comparable efficiency with the reported studies. Our work highlights the promise of using the low-cost biomass-derived materials as highly effective solar vapor generators in the realm of seawater desalination and wastewater treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar-driven interfacial evaporation
Tao, P., Ni, G., Song, C., Shang, W., Wu, J., Zhu, J., Chen, G., & Deng, T. (2018) · Nature Energy · doi:10.1038/s41560-018-0260-7 · Cited by 2,380
Solar steam generation by heat localization
Ghasemi, H., Ni, G., Marconnet, A. M., Loomis, J., Yerci, S., Miljkovic, N., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms5449 · Cited by 2,333
Processing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
Ghaffour, N., Missimer, T. M., & Amy, G. L. (2013) · Desalination · doi:10.1016/j.desal.2012.10.015 · Cited by 1,603
Tree‐Inspired Design for High‐Efficiency Water Extraction
Zhu, M., Li, Y., Chen, G., Jiang, F., Yang, Z., Luo, X., Wang, Y., Lacey, S. D., Dai, J., Wang, C., et al. (2017) · Advanced Materials · doi:10.1002/adma.201704107 · Cited by 694
Cited by
Carbon Materials for Solar Water Evaporation and Desalination
Guan, W., Guo, Y., & Yu, G. (2021) · Small · doi:10.1002/smll.202007176 · Cited by 390
Flexible and Mildew-Resistant Wood-Derived Aerogel for Stable and Efficient Solar Desalination
Zhang, Q., Li, L., Jiang, B., Zhang, H., He, N., Yang, S., Tang, D., & Song, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05806 · Cited by 190
Self-citation
Metadata
- Authors
- Zhang, H., Li, L., Jiang, B., Zhang, Q., Ma, J., Tang, D., & Song, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-03-17
- Volume
- 12
- Issue
- 14
- Pages
- 16503-16511
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3012209605
- Cited by
- 167
- References
- 5
- FWCI
- 4.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.