The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation of Lead-free Two-Dimensional-Layered (C8H17NH3)2SnBr4 Perovskite Scintillators and Their Application in X-ray Imaging
Abstract
Scintillators, as spectral and energy transformers, are essential for X-ray imaging applications. However, their current disadvantages, including high-temperature sintering and generation of agglomerated powders or large bulk crystals, may not meet the increasing demands of low cost, nontoxicity, and flexible radiation detection. Thus, improved perovskite scintillators are developed in this research. A hybrid perovskite ((C 8 H 17 NH 3 ) 2 SnBr 4 ), which is nontoxic, lead-free, and organic–inorganic, is developed as a scintillator with good emission performance and radioluminescence intensity. These perovskite scintillators are synthesized at low temperatures in an aqueous acid solution, through which they generate a near-unity photoluminescence quantum yield of 98% with the excitation of ultraviolet light. As far as we know, this work is the first to show that the two-dimensional (2D) (C 8 H 17 NH 3 ) 2 SnBr 4 perovskite scintillator films prepared by coating a polymer layer can be applied to an X-ray imaging system. The results demonstrate that the low cost X-ray imaging device with good resolution and performance benefits dramatically from this lead-free organic–inorganic hybrid perovskite film. Therefore, this 2D-layered (C 8 H 17 NH 3 ) 2 SnBr 4 perovskite scintillator may be a high potential candidate for scintillating material for X-ray imaging techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Halide Perovskite Nanosheet for X-ray High-Resolution Scintillation Imaging Screens
Zhang, Y., Sun, R., Ou, X., Fu, K., Chen, Q., Ding, Y., Xu, L.-J., Liu, L., Han, Y., Malko, A. V., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b09484 · Cited by 506
Cited by
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Metal Halide Perovskites for X-ray Imaging Scintillators and Detectors
Zhou, Y., Chen, J., Bakr, O. M., & Mohammed, O. F. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02430 · Cited by 891
Perovskite: Scintillators, direct detectors, and X-ray imagers
Jana, A., Cho, S., Patil, S. A., Meena, A., Jo, Y., Sree, V. G., Park, Y., Kim, H., Im, H., & Taylor, R. A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.04.009 · Cited by 363
Jiang, T., Ma, W., Zhang, H., Tian, Y., Lin, G., Xiao, W., Yu, X., Qiu, J., Xu, X., (Michael) Yang, Y., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009973 · Cited by 353
Self-citationHalide Perovskite, a Potential Scintillator for X‐Ray Detection
Zhou, F., Li, Z., Lan, W., Wang, Q., Ding, L., & Jin, Z. (2020) · Small Methods · doi:10.1002/smtd.202000506 · Cited by 292
Self-citation
Metadata
- Authors
- Cao, J., Guo, Z., Zhu, S., Fu, Y., Zhang, H., Wang, Q., & Gu, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-06
- Volume
- 12
- Issue
- 17
- Pages
- 19797-19804
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3014396974
- Cited by
- 167
- References
- 1
- FWCI
- 15.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.