High-Performance Laminated Fabric with Enhanced Photothermal Conversion and Joule Heating Effect for Personal Thermal Management
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Multifunctional wearable heaters have attracted much attention owing to their efficient application in personal thermal management. Inspired by the polar bear’s thermal management, a laminated fabric with enhanced photothermal conversion, mid-infrared reflection, thermal insulation, and electrical heating performance was developed in this work, which was made of CNT/cellulose aerogel layers, cotton fabrics, and copper nanowire (CuNW)-based conductive network (CNN) layers. The CNN layer made up of highly conductive CuNWs not only exhibits better conductivity to realize the Joule heating effect but also possesses a human mid-infrared reflection property. Moreover, the other side of the cotton fabric was laminated with CNT/cellulose aerogel, which enables the fabric to have a good photothermal conversion ability and thermal insulation performance. The temperature of the laminated fabric could reach to 70 °C within 80 s under 1.8 V; it requires more than 500 s to return to room temperature (28.7 °C). When the light intensity was adjusted to 1000 W/m 2, the temperature of the laminated fabric was about 74.0 °C after lighting for 280 s. Our work provides a new approach to improving the performance and energy-saving of personal thermal management fabrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Choi, S., Park, J., Hyun, W., Kim, J., Kim, J., Lee, Y. B., Song, C., Hwang, H. J., Kim, J. H., Hyeon, T., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02790 · Cited by 568
Jang, N.-S., Kim, K.-H., Ha, S.-H., Jung, S.-H., Lee, H. M., & Kim, J.-M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03474 · Cited by 159
Metadata
- Authors
- Guo, Z., Sun, C., Wang, J., Cai, Z., & Ge, F.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-10
- Volume
- 13
- Issue
- 7
- Pages
- 8851-8862
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3128052623
- Cited by
- 159
- References
- 2
- FWCI
- 16.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-Performance Laminated Fabric with Enhanced Photothermal Conversion and Joule Heating Effect for Personal Thermal Management. https://app.cochat.ai/papers/10.1021/acsami.0c23123
- The paper
- Guo, Z., Sun, C., Wang, J., Cai, Z., & Ge, F. (2021). High-Performance Laminated Fabric with Enhanced Photothermal Conversion and Joule Heating Effect for Personal Thermal Management. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.0c23123
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.