Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 264

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Carbon-Based Photothermal Superhydrophobic Materials with Hierarchical Structure Enhances the Anti-Icing and Photothermal Deicing Properties

Xie, Zhenting, Wang, Hong, Geng, Yang, Li, Meng, Deng, Qiyuan, Tian, Ye, Chen, Rong, Zhu, Xun, Liao, Qiang·2021·ACS Applied Materials & Interfaces

Abstract

Ice formation on the surface of outdoor equipment brings significant inconvenience to human life and production. Superhydrophobic materials with the micro-nanostructure are considered to be effective anti-icing materials. However, repeated icing and deicing processes will destroy the structure and lose anti-icing properties. Herein, low-cost, durable, high-efficiency photothermal superhydrophobic materials were prepared by electrochemical deposition and silanization treatment methods. Combined with the black-body property of carbon materials and the micro-nano hierarchical structure, the as-prepared material has excellent photothermal and superhydrophobic properties. The surface temperature can rise to 90 °C, and the freezing droplets can melt in 100 s under 100 mW/cm 2 of sunlight illumination. The superhydrophobic property endows the material with excellent anti-icing performance, and the icing delay time is as long as 3600 s. The melted water droplet can quickly roll off due to the low adhesion of the superhydrophobic surface, which avoids the refreezing of the melted droplet and enhances the photothermal conversion performance. We innovatively use the elemental tracer method to understand the melted water droplet roll off mechanism on inclined surfaces. In addition, the heat transfer model of anti-icing and photothermal deicing processes are established to confirm that the heat required for melting ice during the deicing process is mainly generated by photothermal materials. Finally, the feasibility of practical application of the material was verified by the anti-icing/deicing experiment of a wind turbine blade and ice/frost layer melting experiment. It concludes that the superior anti-icing and deicing properties are realized using the high photothermal conversion and excellent superhydrophobic properties of the prepared photothermal superhydrophobic materials. This study provides a perspective for constructing micro-nano hierarchical structures on the surface and combining them with the abundant solar energy in nature to develop photothermal anti-icing materials for practical application.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.1c15028

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 264

Metadata

Authors
Xie, Z., Wang, H., Geng, Y., Li, M., Deng, Q., Tian, Y., Chen, R., Zhu, X., & Liao, Q.
Venue
ACS Applied Materials & Interfaces
Published
2021-09-29
Volume
13
Issue
40
Pages
48308-48321
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W3204215187
Cited by
264
References
36
FWCI
20.43
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.