Bioinspired Flexible Kevlar/Hydrogel Composites with Antipuncture and Strain-Sensing Properties for Personal Protective Equipment
The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Abstract
Currently, multifunction has become an essential direction of personal protective equipment (PPE), but achieving the protective effect, flexibility, physiological comfort, and intelligent application of PPE simultaneously is still a challenge. Herein, inspired by the meso-structure of rhinoceros skin, a novel strategy is proposed by compounding an ammonium sulfate ((NH 4 ) 2 SO 4 ) solution soaked gelatin hydrogel with the high weight fraction and vertically interwoven Kevlar fibers to manufacture a flexible and wearable composite with enhanced puncture resistance and strain-sensing properties. After (NH 4 ) 2 SO 4 solution immersion, the hydrogel’s tensile strength, toughness, and fracture strain were up to 3.77 MPa, 4.26 MJ/m 3, and 305.19%, respectively, indicating superior mechanical properties. The Kevlar/hydrogel composites revealed excellent puncture resistance (quasi-static of 132.06 N and dynamic of 295.05 N), flexibility (138.13 mN/cm), and air and moisture permeability (17.83 mm/s and 2092.73 g m –2 day –1 ), demonstrating a favorable balance between the protective effect and wearing comfort even after 7 days of environmental exposure. Meanwhile, salt solution immersion endowed the composite with excellent strain-sensing properties at various bending angles (30–90°) and frequencies (0.25–1 Hz) and allowed it to monitor different human motions directly in real-time. The rhinoceros-skin-inspired Kevlar/hydrogel composites provide a simple and economical solution for antipuncture materials that combine high protective effects, a comfortable wearing experience, and good strain-sensing properties, promising multifunctional PPE in the future.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Hofmeister Effect‐Assisted One Step Fabrication of Ductile and Strong Gelatin Hydrogels
He, Q., Huang, Y., & Wang, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705069 · Cited by 509
Self-citationChen, G., Huang, J., Gu, J., Peng, S., Xiang, X., Chen, K., Yang, X., Guan, L., Jiang, X., & Hou, L. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta00002g · Cited by 359
Inspiration from Nature's body armours – A review of biological and bioinspired composites
Ghazlan, A., Ngo, T., Tan, P., Xie, Y. M., Tran, P., & Donough, M. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108513 · Cited by 211
Impact resistance of shear thickening fluid/Kevlar composite treated with shear-stiffening gel
He, Q., Cao, S., Wang, Y., Xuan, S., Wang, P., & Gong, X. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.12.019 · Cited by 194
Chen, F., Zhuang, Q., Ding, Y., Zhang, C., Song, X., Chen, Z., Zhang, Y., Mei, Q., Zhao, X., Huang, Q., et al. (2023) · Advanced Materials · doi:10.1002/adma.202305630 · Cited by 169
Li, W., Xiong, D., Zhao, X., Sun, L., & Liu, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.006 · Cited by 144
Fan, Z., Lu, L., Sang, M., Wu, J., Wang, X., Xu, F., Gong, X., Luo, T., Leung, K. C., & Xuan, S. (2023) · Advanced Science · doi:10.1002/advs.202302412 · Cited by 114
Martini, R., & Barthelat, F. (2016) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/11/6/066001 · Cited by 112
Han, F., Xie, X., Wang, T., Cao, C., Li, J., Sun, T., Liu, H., Geng, S., Zhao, W., Li, J., et al. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201730 · Cited by 109
Nilakantan, G., & Gillespie, J. W. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.02.018 · Cited by 104
Research works printed but not linked: 1
- 10.1016/j.compositesb.2021.108856 · DOI
Cited by
From inert to intelligent: smart biomaterials reshaping the landscape of bioengineering
Dutta, S., Havanagi, S. S., Mishra, P., Sharma, D., & Singh, B. N. (2025) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2025.2570535 · Cited by 30
Hussain, M., Awan, W. A., Zahra, H., Abbas, S. M., Al‐Bawri, S. S., & Zhu, Y. (2025) · Scientific Reports · doi:10.1038/s41598-025-13112-1 · Cited by 18
Yu, X., Huang, J., Yang, F., & Li, J. (2025) · Gels · doi:10.3390/gels11100807 · Cited by 20
“These attributes make hydrogels promising for various biomedical applications, including tissue engineering [8,9], flexible sensors [10], wound healing [11], drug delivery [12], cell encapsulation [13], and soft robots [14], as outlined in Figure 1.”
Guo, Y. Y., Huang, J., Yang, W., & Xu, H. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138127 · Cited by 14
Ali, E. M., Awan, W. A., Alkanhel, R. I., & Elkamchouchi, D. H. (2025) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2025.155988 · Cited by 13
Seaweed Derived Polysaccharides as Sustainable Biomaterials for Tissue Engineering Applications
Ghalsasi, P., Gobinath, C., & Joddar, B. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01301 · Cited by 15
Alshammari, M. D., Belhachi, S., Qureshi, M. T., Abdel‐Hameed, R., Younes, K. M., Alshammari, A. D., Kumar, J. A., & Sillanpää, M. E. T. (2026) · International Journal of Modern Physics B · doi:10.1142/s0217979226500207 · Cited by 12
Pareek, A., Bhatt, B., Parmar, V., Alasiri, G. A., Alsaidan, O. A., Kapoor, D. U., & Prajapati, B. G. (2025) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2025.125899 · Cited by 15
Piezoelectric Materials for Energy Harvesting in Wearables
Shekari, M., Naderi, G., Moghari, S., Naqvi, M., & Khonakdar, H. A. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70186 · Cited by 12
“Wearable electronics, which are becoming integral to modern healthcare, fitness, and entertainment sectors, rely heavily on a continuous power supply for functionality [7–9].”
Energy dissipation mechanisms in topologically interlocking structures
Jing, Y., Chen, Z., Wang, H., Zhang, X., Long, S., & Yao, X. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110317 · Cited by 21
Self-citationPal, D. B., Rathoure, A. K., Awasthi, A., Gautam, S., Kumar, S., & Kapoor, A. (2025) · Luminescence · doi:10.1002/bio.70324 · Cited by 11
“Concurrently, the inherent cost advantage of paper substrates can be significantly compromised when incorporating additional components such as external detectors or heating elements, creating scalability challenges for widespread deployment [96].”
Prototype fabrication of graphite-patterned flexible sensors and gauges for liquid level monitoring
Ullah, Z., Raza, N., Akhtar, H., & Sonil, N. I. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131587 · Cited by 11
Programmable Biointerfaces and Adaptive Functionality in Next-Generation Green Nanomaterials
Rabiee, N. (2025) · ACS Synthetic Biology · doi:10.1021/acssynbio.5c00620 · Cited by 10
Multiscale computational modeling of 3D printed continuous Fiber reinforced polymer composites
Li, X. (2025) · Scientific Reports · doi:10.1038/s41598-025-01556-4 · Cited by 15
Self-citationTamjid, M. I., Abtew, M. A., & Kopot, C. (2025) · Journal of Composites Science · doi:10.3390/jcs9070337 · Cited by 10
Ullah, K., Zeb, M. S., Khan, W., Alam, S., Rashid, A. U., & Oh, W. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2025.07.058 · Cited by 12
Synthesis of nano-ferrites-based materials: A new paradigm for electrochemical sensors
Hussain, S., Chandio, I., Rashid, M. A., Sadiq, I., Baig, J. A., Solangi, S. A., Shahbaz, M., & Thebo, K. H. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.120218 · Cited by 11
Meng, Y., Yang, J., Geng, J., Lü, Y., Cai, J., & Liu, S. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.139528 · Cited by 9
Wang, Y., Zhao, Y., Tian, M., Zhuo, L., Lin, S., Chen, L., Chang, X., & Zhu, Y. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102679 · Cited by 12
Abouelregal, A. E., Alsaeed, S. S., & Ismail, M. F. (2025) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-025-09800-5 · Cited by 8
“Liu et al. (Zhang et al. 2024) introduced a groundbreaking stitchless atomic force microscopy (AFM) technique, achieving zero stitching error and high throughput, revolutionizing precise nanoscale characterization and manipulation.”
Naman, A., Mehmood, N., Fatima, A., Kim, M.-S., Knani, S., Safadi, M. E., & Younas, S. (2025) · Plasmonics · doi:10.1007/s11468-025-03270-3 · Cited by 9
Sol–gel derived magnetic oxide nanomaterials: synthesis, properties, and spintronic applications
Hjiri, M., & Mustapha, N. (2025) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-025-06931-1 · Cited by 9
Carbon based nanocomposites powering the future of wearable and bioelectronics: A review
Shahab, M., Rahim, M., Mutahir, S., Uddin, S., Khan, M. A., & Ullah, K. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.184296 · Cited by 10
Ishfaq, K., Harris, M., Kumar, M. S., Habib, M. S., Ullah, M., Anwar, S., & AlFaify, A. Y. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.12.269 · Cited by 8
Mechano‐Adaptive Anti‐Swelling Hydrogels: Stable Motion‐Interfacing and Healthcare Monitoring
Ji, C., Yang, J. T., Wang, X., Wang, Y., Li, Y., Liang, X., Zhao, J., & Lian-zhong, C. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202502048 · Cited by 8
“By integrating inherent anti-swelling properties with biomimetic structural functions, these materials enable a paradigm shift in rehabilitation medicine from passive protection to active intervention [ 141, 142 ].”
Knitted forming material with a lock-ring structure for individual puncture protection
Yu, X., Su, T., Liang, X., Cong, H., He, H., Jiang, G., & Ma, P. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162621 · Cited by 7
Ali, M. S. M., Hasan, M. N., & Laskar, N. M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237737 · Cited by 7
Mehmood, N., Fatima, A., Naman, A., Knani, S., & Younas, S. (2025) · Plasmonics · doi:10.1007/s11468-025-03283-y · Cited by 8
Etafo, N. O., Akache-Abutu, N., Adekanmi, D. G., Dey, S., Bamidele, M. O., Bamikale, M. B., Adeyi, T. A., Cheok, A. D., Enochoghene, S., Thomas, O., et al. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.117293 · Cited by 7
Fatima, M., Kanwal, N., Elsayed, N. M. I., Rana, T., & Aziz, M. H. (2025) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2025.106406 · Cited by 6
Zhao, X., Zhang, H., Qian, Z. M., & Jing, C. (2025) · PeerJ Computer Science · doi:10.7717/peerj-cs.3002 · Cited by 9
Mughal, E. U., Naeem, N., Kainat, S. F., Sadiq, A., & Ogaly, H. A. (2025) · RSC Advances · doi:10.1039/d5ra04623h · Cited by 6
Lou, M., Ma, Z., Zhang, J., Li, W., Wang, H., & Jia, L. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.139112 · Cited by 6
Self-citationMoghari, S., Haghighat, H. R., Naderi, G., & Khonakdar, H. A. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70189 · Cited by 6
Sriariyanun, M., Koppiahraj, K., Paramasivam, B., Rajeshkumar, K., & Kavimani, V. (2025) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.70165 · Cited by 6
“11 Under typical litter conditions, it can take up to 18 months to break down.”
Khan, A. A., Laghari, A. A., Almansour, H., Kumar, T., Jaghdam, I. H., Hajjej, F., & Mohamed, M. A. (2025) · Scientific Reports · doi:10.1038/s41598-025-25146-6 · Cited by 13
Biopolymer-based electrospinning nanoarchitectonics for advancement in tissue regeneration
Keerthii, R., Sre, V. V., & Khan, S. S. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107031 · Cited by 9
Wang, Z., & Kang, K. (2025) · Scientific Reports · doi:10.1038/s41598-025-18444-6 · Cited by 5
“Convolutional networks are extensively utilized in Human Activity Recognition (HAR) because of their capacity to extract local spatial and spatiotemporal information from sensor data and images [6, 11].”
InfluentialOptimal solution for size-dependent sliding frictional contact of piezoelectric materials
Wang, S.-W., Sun, Y., Su, J., & Ke, L.-L. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110557 · Cited by 5
Self-citationGonzález, L., Ruíz, I., Raposo, M., Aguayo, C. R., Toledo, J. R., Puyana, V. M. P., Romero, A., & Fernández, K. F. (2025) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2025.115176 · Cited by 6
Review: laser-induced graphene for high-performance pressure sensors
Sistani, F., & Sadeghzadeh, S. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11643-6 · Cited by 6
Dai, J., Xu, Y., Zhang, T., & Zhang, X. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.58171 · Cited by 5
Self-citationConductive Hydrogels as Next‐Generation Materials for Flexible and Wearable Electronic Systems
Haghighat, H. R., Naqvi, M., Moghari, S., Naderi, G., & Khonakdar, H. A. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70233 · Cited by 7
Nie, L., Lu, Y., Han, Y., & Ding, P. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114482 · Cited by 4
Design, Fabrication, and Applications of Bioinspired Strong and Tough Hydrogels
Xue, C., Qiu, X., Zhang, Z., Liu, Y., Huang, K., Zhang, J., & Zhang, H. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202502128 · Cited by 6
“These properties make them promising candidates for personal protective equipment [ 153, 154 ], protective coatings for delicate devices [ 155 ], and cushioning interfaces in biomedical implants [ 156 ].”
Daneshmand, S., Vini, M. H., Basem, A., Singh, N. S. S., Hussein, M. A., Salahshour, S., & Mokhtari, A. (2025) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2025.103573 · Cited by 6
High performance multifunctional bio-gel sensor prepared with konjac glucomannan and κ-carrageenan
Wang, Y., Huang, Z., Zhang, D., Li, M., Wen, X., Lei, X., Ye, Z., & Pang, J. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124215 · Cited by 5
Recent Innovations in Environmental Applications of Polymer Gels and Networks
Shekari, M., Taromi, A. A., Naderi, G., Naqvi, M., & Khonakdar, H. A. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70201 · Cited by 7
Wang, B., Deng, Y., Li, H., Shen, X., Ding, H., Li, X., & Zheng, S. Y. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.170086 · Cited by 4
Self-citationPhotonic Crystal Fiber-Based Chemical and Bacterial Sensors for Healthcare Applications: A Review
Patel, P., Kumar, D., Chaudhary, V. S., Kumari, S., Tiwari, R. K., & Kumar, S. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3624370 · Cited by 4
“This study documented a novel fiber microprobe interference-sensing technique for very accurate large-range displacement measurements in confined environments [97], [98].”
Takmili, S. A., Choi, E., Ostadrahimi, A., & Baghani, M. (2025) · Materials · doi:10.3390/ma18235401 · Cited by 4
Hadia, N. M. A., Bano, Z., Arslan, M., Zeeshan, M., Alzaid, M., Hasaneen, M. F., & Mohamed, W. S. (2025) · Materials Science and Engineering B · doi:10.1016/j.mseb.2025.119072 · Cited by 4
Kaur, A., Sharma, I., Arora, V., Singh, S., Tandon, N., Dosanjh, H. S., Prasad, N., Malhi, P. S., Bansal, N., Singh, S., et al. (2025) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2025.173766 · Cited by 4
Raja, T., Devarajan, Y., Manjunath, H. R., Acharya, S. K., Vijaykumar, G., Tiwari, A., & Singh, V. K. (2025) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2025.106905 · Cited by 4
Karthikeyan, V., & Vivekanandan, S. (2025) · RSC Advances · doi:10.1039/d5ra06066d · Cited by 5
Wang, C., Zhang, L., Pan, R. K., Wang, Y., & Yang, W. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c04180 · Cited by 4
Hashemi, M. M., Hasheminia, F., Heydariyan, A., & Sadeghzadeh, S. (2026) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2026.118462 · Cited by 4
Kumar, K. S., Muralidhar, S., Kaushik, D., & Singh, I. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131327 · Cited by 3
Review on modeling theories of electrosensitive hydrogels for cartilage tissue engineering
Farooqi, A. R., Seitz, H., & van Rienen, U. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1631725 · Cited by 3
Margabandu, S., Sahayaraj, A. F., Kumar, R. S., Pradhan, R., Nithyanandhan, T., & Ajmal, T. S. (2026) · Polymer Bulletin · doi:10.1007/s00289-026-06288-7 · Cited by 3
Cellulose-based shape change smart material responding to moisture and light
Rezaei, S., & Azizian, S. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138542 · Cited by 3
Hu, Y., Yijiang, W., Habibi, M., Zhicong, D., Li, B., & Yuhuan, L. (2025) · Acta Mechanica · doi:10.1007/s00707-025-04362-1 · Cited by 4
Subramani, M., Veluswamy, P., Ikeda, H., & Mohandos, S. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.137549 · Cited by 2
Zhu, P., & Hu, Y. (2025) · Matéria (Rio de Janeiro) · doi:10.1590/1517-7076-rmat-2025-0327 · Cited by 6
Kaur, N., Mughal, E. U., Naeem, N., Sadiq, A., Zafar, M. N., & Alzahrani, A. Y. A. (2025) · Structural Chemistry · doi:10.1007/s11224-025-02607-2 · Cited by 2
Li, X., Wu, B., Liu, T., Chen, M., Sun, R., & Wang, Q. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.09.263 · Cited by 2
Self-citationHussain, S., Ghaffar, A., Ali, A., Mehdi, M., Cao, L., Haider, M. S. U. K., Abbasi, S. J., Mehdi, R., Ali, A., & Ma, R. (2025) · Optics & Laser Technology · doi:10.1016/j.optlastec.2025.114181 · Cited by 2
Cui, Z., Tian, X., Duan, M., Yang, Z., Zhang, X., Li, D., Sun, R., & Wang, Q. (2025) · Textile Research Journal · doi:10.1177/00405175251316272 · Cited by 2
Self-citationAsadinia, N., Alibeigloo, A., & Maslak, A. T. (2025) · Mechanics Based Design of Structures and Machines · doi:10.1080/15397734.2025.2588311 · Cited by 2
Adaptive encapsulation gels enhance bioactives stability in vitro
Du, H., Gao, J., Yang, H., & Lü, K. (2025) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2025.112884 · Cited by 2
Wang, X., Song, X., Lu, J. D., Chen, Y., & Guo, Y. (2025) · Polymer · doi:10.1016/j.polymer.2025.129477 · Cited by 2
Xu, J. B., Lv, S., Chen, Y., Liu, X., He, T., & Liu, L. (2026) · Microchemical Journal · doi:10.1016/j.microc.2026.117339 · Cited by 4
Feng, Y., Xu, Q., Zhu, H., & Feng, X. (2025) · New Journal of Chemistry · doi:10.1039/d5nj02228b · Cited by 2
Rajabinezhad, M., Bahrami, A., Abbasi, M. S., Mahmoudi, M., & Mirzaei, A. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.07.295 · Cited by 2
Sharma, S. K., Sharma, A. K., Singh, S., Tandon, N., Dosanjh, H. S., & Sharma, I. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.08.115 · Cited by 2
Mohite, D. D., Chavan, S., Lokhande, P. E., Sutar, K. B., Chendake, Y. J., Dubal, S. V., Vedpathak, A. S., Rednam, U., Raut, D. N., Kumar, D., et al. (2025) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-025-15520-5 · Cited by 2
Chen, J., Shi, J., Mao, S., Zhao, W., & Peng, Y. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-11947-3 · Cited by 2
“As shown, specimen 1 exhibited the lowest fl exural strength at 58.7 MPa, while specimen 7 demonstrated the highest value of 95.6 MPa, yielding a substantial difference of 36.9 MPa between them (Ref 32).”
InfluentialDoroshenko, K. M., & Shefchenko, O. I. (2025) · Fullerenes Nanotubes and Carbon Nanostructures · doi:10.1080/1536383x.2025.2553699 · Cited by 3
“MXene–polymer composites, hydrogels, and textiles were successfully fused with graphene nanosheets to create skin-conformal sensors capable of monitoring biomarkers such as glucose, lactate, dopamine, uric acid, and pH via sweat or epidermal contact [253,254] .”
RetractedTaherian, S., Taherian, N., Yang, M., & Zhai, S. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3602817 · Cited by 2
“Microsystems have great potential in biomedical applications, offering less invasive treatments for patients and reducing overall medical costs [9].”
Miao, F., Fan, Y., Tao, B., & Zhang, P. (2025) · Vacuum · doi:10.1016/j.vacuum.2025.114929 · Cited by 2
MXenes-loaded gelatin hydrogels as wound dressings
Yu, R., Chen, L., Zhang, X., Jiang, X., & Liu, X. (2025) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2025.2566815 · Cited by 1
Self-citationPadmanabhan, S. K., Giordano, M. E., Villani, S., Udayan, G., Stoppa, M., Alifano, P., Demitri, C., Lionetto, M. G., & Licciulli, A. (2025) · Gels · doi:10.3390/gels11110851 · Cited by 1
“Zhang et al. developed bioinspired Kevlar/hydrogel composites combining mechanical toughness and sensing capabilities, offering insights for enhancing the durability of BC hydrogels [13].”
He, J., & Cao, Q. (2025) · Fibers and Polymers · doi:10.1007/s12221-025-01263-x · Cited by 1
Huo, W., He, W., Hu, J., Duan, X., Wang, F., & Li, Z. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.147188 · Cited by 1
Karthikeyan, K., Gurusamy, P., Muthuraman, V., & Vijayan, S. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06192-6 · Cited by 1
A survey of cyber threat intelligence in embedded system driven security for mobile health systems
Ikegwu, A. C., Nnabue, J. C., Kinse, A. S., & Alo, U. R. (2025) · Journal of Cloud Computing Advances Systems and Applications · doi:10.1186/s13677-025-00811-3 · Cited by 1
“This critical medical equipment and personal protective equipment substantially assists medical professionals in diagnosing diseases and makes it easier to monitor patients admitted to their institutions [13, 14].”
Zou, Y., Liu, M., Mao, J., Yu, Y., Liu, H., Guo, S., Sun, D., & Ma, J. (2025) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2025.109226 · Cited by 1
Sun, W., Wang, Z., Jin, X., Zhao, H., Fu, Q., & Wang, J. (2025) · Polymer · doi:10.1016/j.polymer.2025.129126 · Cited by 1
Nosratabadi, M., Kahnooj, S. A. H., & Sillanpää, M. E. T. (2026) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2026.109551 · Cited by 2
Bio-jaali: Reimagining vernacular passive cooling screens with mycelium-based composites
Debnath, K. B., Pynirtzi, N., Scott, J., Davie, C. T., & Bridgens, B. (2026) · Energy and Buildings · doi:10.1016/j.enbuild.2026.117104 · Cited by 1
Ji, R., Cai, T., Wang, H., Song, H., Xu, Q., Zhang, Y., & Wang, P. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.140333 · Cited by 2
Self-citationYao, Y., Wei, X., Ge, H., Zhou, J., Zhang, P., Xue, Y., Zhou, D., Sheng, C., Zhu, L., Xie, Q., et al. (2026) · Advanced Fiber Materials · doi:10.1007/s42765-026-00686-2 · Cited by 1
“…external pressure stimulates the ML fiber again, reversing the electrostatic induction causes electrons to flow in the opposite direction. resulting in continuous flow of charges during the contact–release cycle of the ML composite fiber and the continuous generation of alternating current [57–59].”
Devi, M., Sharma, A., Prakash, S., & Sunny (2025) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-025-15553-w
“Combining mechanical energy harvesting with advanced bio-compatible materials can revolutionize medical technology by enabling the long-term, reliable operation of critical life-supporting devices [15, 16].”
Zeng, D., Zhou, L., Su, Y., Liu, C., Li, F., Chen, J., Lin, T., Lin, C., Zhao, C., Gao, M. T., et al. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11370-y
Strain transfer characteristics subjected to thermal loading for flexible strain sensors
Zhang, J., Weng, S., Gao, K., Zhu, H., Zhang, X., & Zhang, J. (2025) · Measurement · doi:10.1016/j.measurement.2025.119106
Self-citationSynthesizing an Innovative Nanocomposite to Improve Polymer Gel Performance
Qi, H., Altalbawy, F. M. A., Vora, T. P., Manjunatha, R., Thakur, R., Angel, B., Das, P., Negi, A. S., Formanova, S. B., Sead, F. F., et al. (2025) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.70103
Wang, J., Xi, W., Han, Y., & Xu, B. (2025) · Instrumentation Science & Technology · doi:10.1080/10739149.2025.2576052
“[17] In summary, microcantilever sensors currently used for liquid sample analysis have the following three disadvantages: first, quality factor and sensitivity decrease due to liquid damping; second, real-time detection cannot be realized; third, large quantites of samples are consumed.”
High-toughness, low-constant epoxy/α-ZrP layered composites for advanced antenna packaging
Wu, C., Du, G., Wang, W., Yuan, J., Du, X., Chen, Q., & Liu, Y. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.12.115
旗旗, 吴., Zhi, S., Yu, T., Shi, Z., & Lu, H. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5520700
Wang, L., Long, X., Xu, L., & Nan, M. (2025) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2025.138835
Metadata
- Authors
- Zhang, X., Wang, S., Chen, X., Cui, Z., Li, X., Zhou, Y., Wang, H., Sun, R., & Wang, Q.
- Affiliations
- Xi'an Polytechnic University (CN)
- Lanzhou University (CN)
- Corresponding author
- Wang, Qiushi
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-08-16
- Volume
- 16
- Issue
- 34
- Pages
- 45473-45486
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W4401645762
- Cited by
- 111
- References
- 59
- Citations by year
- 2026: 20 · 2025: 91
- FWCI
- 12.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Scientific Research Plan Projects of Shaanxi Education Department (23JK0468)
- National Key Research and Development Program of China (2022YFF1400604)
- Natural Science Foundation of Shaanxi Province (24JC-YBQN-0423)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Keywords
- personal protective equipment, puncture resistance, strain sensing, gelatin hydrogel, ammonium sulfate solution, motion monitoring, biomimetic materials
- MeSH terms
- Personal Protective Equipment, Wearable Electronic Devices, Animals, Gelatin, Humans, Tensile Strength, Hydrogels, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.