The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation of MIL-53(Fe)-Reduced Graphene Oxide Nanocomposites by a Simple Self-Assembly Strategy for Increasing Interfacial Contact: Efficient Visible-Light Photocatalysts
Abstract
In this work, MIL-53(Fe)-reduced graphene oxide (M53-RGO) nanocomposites have been successfully fabricated by a facile and efficient electrostatic self-assembly strategy for improving the interfacial contact between RGO and the MIL-53(Fe). Compared with D-M53-RGO (direct synthesis of MIL-53(Fe)-reduced graphene oxide nanocomposites via one-pot solvothermal approach), M53-RGO nanocomposites exhibit improved photocatalytic activity compared with the D-M53-RGO under identical experimental conditions. After 80 min of visible light illumination (λ ≥ 420 nm), the reduction ratio of Cr(VI) is rapidly increased to 100%, which is also higher than that of reference sample (N-doped TiO2). More significantly, the M53-RGO nanocomposites are proven to perform as bifunctional photocatalysts with considerable activity in the mixed systems (Cr(VI)/dyes) under visible light, which made it a potential candidate for industrial wastewater treatment. Combining with photoelectrochemical analyses, it could be revealed that the introduction of RGO would minimize the recombination of photogenerated electron-hole pairs. Additionally, the effective interfacial contact between MIL-53(Fe) and RGO surface would further accelerate the transfer of photogenerated electrons, leading to the enhancement of photocatalytic activity of M53-RGO toward photocatalytic reactions. Finally, a possible photocatalytic reaction mechanism is also investigated in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Cited by
Georgakilas, V., Tiwari, J. N., Kemp, K. C., Perman, J. A., Bourlinos, A. B., Kim, K. S., & Zboril, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00620 · Cited by 2,494
Heterogeneous Fenton catalysts: A review of recent advances
Thomas, N., Dionysiou, D. D., & Pillai, S. C. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124082 · Cited by 889
Photocatalytic Cr(VI) reduction in metal-organic frameworks: A mini-review
Wang, C.-C., Du, X.-D., Li, J., Guo, X.-X., Wang, P., & Zhang, J. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.04.030 · Cited by 659
Li, G., Zhao, S., Zhang, Y., & Tang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201800702 · Cited by 521
Modified metal-organic frameworks as photocatalysts
Qiu, J., Zhang, X., Feng, Y., Zhang, X., Wang, H., & Yao, J. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.03.039 · Cited by 499
Metadata
- Authors
- Liang, R., Shen, L., Jing, F., Qin, N., & Wu, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-30
- Volume
- 7
- Issue
- 18
- Pages
- 9507-9515
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2313176456
- Cited by
- 270
- References
- 1
- FWCI
- 6.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.