The DOI matches its Crossref record.
Polypyrrole–MnO2-Coated Textile-Based Flexible-Stretchable Supercapacitor with High Electrochemical and Mechanical Reliability
Abstract
Carbon-nanotube (CNT)-based textile supercapacitors with MnO2 nanoparticles have excellent power and energy densities, but MnO2 nanoparticles can be delaminated during charge-discharge cycles, which results in significant degradation in capacitance. In this study, polypyrrole conductive polymer was coated on top of MnO2 nanoparticles that are deposited on CNT textile supercapacitor to prevent delamination of MnO2 nanoparticles. An increase of 38% in electrochemical energy capacity to 461 F/g was observed, while cyclic reliability also improved, as 93.8% of energy capacity was retained over 10 000 cycles. Energy density and power density were measured to be 31.1 Wh/kg and 22.1 kW/kg, respectively. An in situ electrochemical-mechanical study revealed that polypyrrole-MnO2-coated CNT textile supercapacitor can retain 98.5% of its initial energy capacity upon application of 21% tensile strain and showed no observable energy storage capacity change upon application of 13% bending strain. After imposing cyclic bending of 750 000 cycles, the capacitance was retained to 96.3%. Therefore, the results from this study confirmed for the first time that the polypyrrole-MnO2-coated CNT textile can reliably operate with high energy and power densities with in situ application of both tensile and bending strains.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Research progress on conducting polymer based supercapacitor electrode materials
Meng, Q., Cai, K., Chen, Y., & Chen, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.040 · Cited by 1,405
Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components
Trung, T. Q., & Lee, N. (2017) · Advanced Materials · doi:10.1002/adma.201603167 · Cited by 497
Shrivastava, S., Trung, T. Q., & Lee, N.-E. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00319c · Cited by 497
Zhao, Z., Xia, K., Hou, Y., Zhang, Q., Ye, Z., & Lu, J. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00800e · Cited by 490
Highly Stretchable and Self-Healable Supercapacitor with Reduced Graphene Oxide Based Fiber Springs
Wang, S., Liu, N., Su, J., Li, L., Long, F., Zou, Z., Jiang, X., & Gao, Y. (2017) · ACS Nano · doi:10.1021/acsnano.6b08262 · Cited by 482
Sumboja, A., Liu, J., Zheng, W. G., Zong, Y., Zhang, H., & Liu, Z. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00237a · Cited by 407
Flexible Molybdenum Disulfide (MoS2) Atomic Layers for Wearable Electronics and Optoelectronics
Singh, E., Singh, P., Kim, K. S., Yeom, G. Y., & Nalwa, H. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19859 · Cited by 407
Conductive polymers for stretchable supercapacitors
Wang, Y., Ding, Y., Guo, X., & Yu, G. (2019) · Nano Research · doi:10.1007/s12274-019-2296-9 · Cited by 358
Choudhary, R. B., Ansari, S., & Purty, B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101302 · Cited by 265
Metadata
- Authors
- Yun, T. G., Hwang, B. I., Kim, D., Hyun, S., & Han, S. M.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-21
- Volume
- 7
- Issue
- 17
- Pages
- 9228-9234
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2335112042
- Cited by
- 168
- References
- 0
- FWCI
- 6.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.