The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Improved Icephobic Properties on Surfaces with a Hydrophilic Lubricating Liquid
Abstract
Slippery liquid-infused porous surfaces were developed recently for icephobic surface applications. Perfluorinated liquids, silicone oil, hydrocarbon, and water were used as lubricating liquids to form a continuous layer on a suitable substrate to prevent icing. However, ice accretion performances of these surfaces have not been reported previously depending on the type of the lubricant. In this work, fluorinated aliphatics, polyalphaolefin, silicone oil, and decamethylcyclopenta siloxane were used as hydrophobic lubricants; water, ethylene glycol, formamide, and water-glycerine mixture were used as hydrophilic lubricants to be impregnated by hydrophobic polypropylene and hydrophilic cellulose-based filter paper surfaces; ice accretion, drop freezing delay time, and ice adhesion strength properties of these surfaces were examined; and the results were compared to those of the reference surfaces such as aluminum, copper, polypropylene, and polytetrafluoroethylene. An ice accretion test method was also developed to investigate the increase of the mass of formed ice gravimetrically by spraying supercooled water onto these surfaces at different subzero temperatures ranging between -1 and -5 °C. It was determined that hydrophilic solvents (especially a water-glycerine mixture) that impregnated hydrophilic porous surfaces would be a promising candidate for anti-icing applications at -2 °C and 56-83% relative humidity because ice accretion and ice adhesion strength properties of these surface decreased simultaneously in these conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance
Kim, P., Wong, T.-S., Alvarenga, J., Kreder, M. J., Adorno-Martinez, W. E., & Aizenberg, J. (2012) · ACS Nano · doi:10.1021/nn302310q · Cited by 1,316
Cited by
Icephobic materials: Fundamentals, performance evaluation, and applications
Shen, Y., Wu, X., Tao, J., Zhu, C., Lai, Y., & Chen, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.004 · Cited by 441
Nguyen-Tri, P., Tran, H. N., Plamondon, C. O., Tuduri, L., Vo, D.-V. N., Nanda, S., Mishra, A., Chao, H.-P., & Bajpai, A. K. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.03.042 · Cited by 437
Peppou-Chapman, S., Hong, J. K., Waterhouse, A., & Neto, C. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00036a · Cited by 373
Fundamentals of icing and common strategies for designing biomimetic anti-icing surfaces
Li, Q., & Guo, Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03259a · Cited by 292
Superhydrophobic coatings for corrosion protection of magnesium alloys
Yao, W., Liang, W., Huang, G., Jiang, B., Atrens, A., & Pan, F. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.02.055 · Cited by 257
Metadata
- Authors
- Ozbay, S., Yuceel, C., & Erbil, H. Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-24
- Volume
- 7
- Issue
- 39
- Pages
- 22067-22077
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2410895559
- Cited by
- 167
- References
- 1
- FWCI
- 17.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improved Icephobic Properties on Surfaces with a Hydrophilic Lubricating Liquid. https://app.cochat.ai/papers/10.1021/acsami.5b07265
- The paper
- Ozbay, S., Yuceel, C., & Erbil, H. Y. (2015). Improved Icephobic Properties on Surfaces with a Hydrophilic Lubricating Liquid. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.5b07265
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.