The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method
Abstract
Porous CuO nanosheets were prepared on alumina tubes using a facile hydrothermal method, and their morphology, microstructure, and gas-sensing properties were investigated. The monoclinic CuO nanosheets had an average thickness of 62.5 nm and were embedded with numerous holes with diameters ranging from 5 to 17 nm. The porous CuO nanosheets were used to fabricate gas sensors to detect hydrogen sulfide (H2S) operating at room temperature. The sensor showed a good response sensitivity of 1.25 with respond/recovery times of 234 and 76 s, respectively, when tested with the H2S concentrations as low as 10 ppb. It also showed a remarkably high selectivity to the H2S, but only minor responses to other gases such as SO2, NO, NO2, H2, CO, and C2H5OH. The working principle of the porous CuO nanosheet based sensor to detect the H2S was identified to be the phase transition from semiconducting CuO to a metallic conducting CuS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nearly Monodisperse Cu2O and CuO Nanospheres: Preparation and Applications for Sensitive Gas Sensors
Zhang, J., Liu, J., Peng, Q., Wang, X., & Li, Y. (2006) · Chemistry of Materials · doi:10.1021/cm052256f · Cited by 1,128
CuO Nanowires Can Be Synthesized by Heating Copper Substrates in Air
Jiang, X., Herricks, T., & Xia, Y. (2002) · Nano Letters · doi:10.1021/nl0257519 · Cited by 1,029
Yin, M., Wu, C.-K., Lou, Y., Burda, C., Koberstein, J. T., Zhu, Y., & O'Brien, S. (2005) · Journal of the American Chemical Society · doi:10.1021/ja050006u · Cited by 986
Liu, P., Huang, Y., Yan, J., Yang, Y., & Zhao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10511 · Cited by 475
Modeling of sensing and transduction for p-type semiconducting metal oxide based gas sensors
Bârsan, N., Simion, C. E., Heine, T., Pokhrel, S., & Weimar, U. (2009) · Journal of Electroceramics · doi:10.1007/s10832-009-9583-x · Cited by 422
Volanti, D. P., Felix, A. A., Orlandi, M. O., Whitfield, G., Yang, D., Longo, E., Tuller, H. L., & Varela, J. A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202332 · Cited by 315
Room-temperature H2S gas sensing at ppb level by single crystal In2O3 whiskers
Kaur, M., Jain, N., Sharma, K., Bhattacharya, S., Roy, M., Tyagi, A. K., Gupta, S. K., & Yakhmi, J. V. (2008) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2008.03.003 · Cited by 304
Li, Z., Huang, Y., Zhang, S., Chen, W., Kuang, Z., Ao, D., Liu, W., & Fu, Y. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.07.003 · Cited by 265
Self-citationDubale, A. A., Tamirat, A. G., Chen, H.-M., Berhe, T. A., Pan, C.-J., Su, W.-N., & Hwang, B.-J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09464j · Cited by 232
Gas sensing properties of CuO nanorods synthesized by a microwave-assisted hydrothermal method
Yang, C., Su, X., Xiao, F., Jian, J., & Wang, J. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.06.024 · Cited by 222
Self-citation
Cited by
Two‐Dimensional Nanostructured Materials for Gas Sensing
Liu, X., Ma, T., Pinna, N., & Zhang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702168 · Cited by 851
Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials
Meng, Z., Stolz, R. M., Mendecki, L., & Mirica, K. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00311 · Cited by 773
Li, Z., Li, H., Wu, Z., Wang, M., Luo, J., Torun, H., Hu, P., Yang, C., Grundmann, M., Liu, X., et al. (2019) · Materials Horizons · doi:10.1039/c8mh01365a · Cited by 760
Self-citationJoshi, N., Hayasaka, T., Liu, Y., Liu, H., Oliveira, O. N., & Lin, L. (2018) · Microchimica Acta · doi:10.1007/s00604-018-2750-5 · Cited by 753
Recent advances in energy-saving chemiresistive gas sensors: A review
Majhi, S. M., Mirzaei, A., Kim, H. W., Kim, S. S., & Kim, T. W. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105369 · Cited by 653
Metadata
- Authors
- Li, Z., Wang, N., Lin, Z., Wang, J., Liu, W., Sun, K., Fu, Y. Q., & Wang, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-02
- Volume
- 8
- Issue
- 32
- Pages
- 20962-20968
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2479435971
- Cited by
- 270
- References
- 22
- FWCI
- 13.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method. https://app.cochat.ai/papers/10.1021/acsami.6b02893
- The paper
- Li, Z., Wang, N., Lin, Z., Wang, J., Liu, W., Sun, K., Fu, Y. Q., & Wang, Z. (2016). Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6b02893
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.