The DOI matches its Crossref record.
Ti3+ Self-Doped Blue TiO2(B) Single-Crystalline Nanorods for Efficient Solar-Driven Photocatalytic Performance
Abstract
Ti 3+ self-doped blue TiO 2 (B) single-crystalline nanorods (b-TR) are fabricated via a simple sol–gelation method, cooperated with hydro-thermal treatment and subsequent in situ treatment method, and afterward annealed at 350 °C in Ar. The structures are characterized by X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (UV–vis), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The prepared b-TR with narrow band gap possesses single-crystalline TiO 2 (B) phase, Ti 3+ self-doping, and one-dimensional (1D) rodlike nanostructure. In addition, the improved photocatalytic performance is studied by decomposition of Rhodamine B (RhB) and hydrogen evolution. The degradation rate of RhB by Ti 3+ self-doped blue TiO 2 (B) single-crystalline nanorods is ∼6.9- and 2.1-times higher compared with the rates of titanium dioxide nanoparticles and pristine TiO 2 (B) nanorods under visible light illumination, respectively. The hydrogen evolution rate of b-TR is 26.6 times higher compared with that of titanium dioxide nanoparticles under AM 1.5 irradiation. The enhanced photocatalytic performances arise from the synergetic action of the special TiO 2 (B) phase, Ti 3+ self-doping, and the 1D rod-shaped single-crystalline nanostructure, favoring the visible light utilization and the separation and transportation of photogenerated charge carriers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Eddy, D. R., Permana, M. D., Sakti, L. K., Sheha, G. A. N., Solihudin, Hidayat, S., Takei, T., Kumada, N., & Rahayu, I. (2023) · Nanomaterials · doi:10.3390/nano13040704 · Cited by 424
MXene-derived TiO2@C/g-C3N4 heterojunctions for highly efficient nitrogen photofixation
Liu, Q., Ai, L., & Jiang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09350k · Cited by 399
Self-citationRecent progress in defective TiO2 photocatalysts for energy and environmental applications
Li, Z., Wang, S., Wu, J., & Zhou, W. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111980 · Cited by 395
Self-citationMedhi, R., Marquez, M. D., & Lee, T. R. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01035 · Cited by 383
Gupta, T., Samriti, Cho, J., & Prakash, J. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100428 · Cited by 268
Zhang, Y., Ding, Z., Foster, C. W., Banks, C. E., Qiu, X., & Ji, X. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700856 · Cited by 265
Self-citationDefect-mediated electron–hole separation in semiconductor photocatalysis
Zhou, W., & Fu, H. (2018) · Inorganic Chemistry Frontiers · doi:10.1039/c8qi00122g · Cited by 260
Self-citationWu, Z., Yang, P., Li, Q., Xiao, W., Li, Z., Xu, G., Liu, F., Jia, B., Ma, T., Feng, S., et al. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202300406 · Cited by 226
Self-citation
Metadata
- Authors
- Zhang, Y., Xing, Z., Liu, X., Li, Z., Wu, X., Jiang, J., Li, M., Zhu, Q., & Zhou, W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-28
- Volume
- 8
- Issue
- 40
- Pages
- 26851-26859
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2523431789
- Cited by
- 179
- References
- 0
- FWCI
- 6.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.