The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Suppression of Dendrite Formation and Corrosion on Zinc Anode of Secondary Aqueous Batteries
Abstract
Novel zinc anodes are synthesized via electroplating with organic additives in the plating solution. The selected organic additives are cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS), polyethylene-glycol (PEG-8000), and thiourea (TU). The synthesized zinc anode materials, namely, Zn-CTAB, Zn-SDS, Zn-PEG, and Zn-TU, are characterized by powder X-ray diffraction and scanning electron microscopy. The results show that each additive produces distinctively different crystallographic orientation and surface texture. The surface electrochemical activity is characterized by linear polarization when the zinc is in contact with the battery's electrolyte. Tafel fitting on the linear polarization data reveals that the synthetic zinc materials using organic additives all exhibit 6-30 times lower corrosion currents. When using Zn-SDS as the anode in the rechargeable hybrid aqueous battery, the float current decreases as much as 2.5 times. The batteries with Zn-SDS, Zn-PEG, and Zn-TU anodes display the capacity retention of 79%, 76%, and 80% after 1000 cycles of charge-discharge at 4C rate, whereas only 67% obtained from the batteries using the anode prepared from commercial zinc foil. Among these electroplated anodes, Zn-SDS is the most suitable for aqueous batteries thanks to its low corrosion rate, low dendrite formation, low float current, and high capacity retention after 1000 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Energetic Zinc Ion Chemistry: The Rechargeable Zinc Ion Battery
Xu, C., Li, B., Du, H., & Kang, F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106307 · Cited by 2,055
Overview of current and future energy storage technologies for electric power applications
Hadjipaschalis, I., Poullikkas, A., & Efthimiou, V. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.09.028 · Cited by 1,500
An Aqueous Zinc‐Ion Battery Based on Copper Hexacyanoferrate
Trócoli, R., & La Mantia, F. (2015) · ChemSusChem · doi:10.1002/cssc.201403143 · Cited by 734
The Secondary Alkaline Zinc Electrode
McLarnon, F. R., & Cairns, E. J. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085653 · Cited by 498
All‐Solid‐State Cable‐Type Flexible Zinc–Air Battery
Park, J., Park, M., Nam, G., Lee, J., & Cho, J. (2015) · Advanced Materials · doi:10.1002/adma.201404639 · Cited by 442
Wiring zinc in three dimensions re-writes battery performance—dendrite-free cycling
Parker, J. F., Chervin, C. N., Nelson, E. S., Rolison, D. R., & Long, J. W. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43754j · Cited by 438
Dufo-López, R., Lujano-Rojas, J. M., & Bernal-Agustín, J. L. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.11.021 · Cited by 351
Aging mechanisms and service life of lead–acid batteries
Ruetschi, P. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.052 · Cited by 349
Xu, Y., Zhang, Y., Guo, Z., Ren, J., Wang, Y., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201508848 · Cited by 343
Suppressing Dendrite Growth during Zinc Electrodeposition by PEG-200 Additive
Banik, S. J., & Akolkar, R. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.040311jes · Cited by 284
An aqueous rechargeable battery based on zinc anode and Na0.95MnO2
Zhang, B., Liu, Y., Wu, X., Yang, Y., Chang, Z., Wen, Z., & Wu, Y. (2014) · Chem. Commun. · doi:10.1039/c3cc48382g · Cited by 271
Suppressing Dendritic Growth during Alkaline Zinc Electrodeposition using Polyethylenimine Additive
Banik, S. J., & Akolkar, R. N. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.12.100 · Cited by 265
Poly(TEMPO)/Zinc Hybrid‐Flow Battery: A Novel, “Green,” High Voltage, and Safe Energy Storage System
Winsberg, J., Janoschka, T., Morgenstern, S., Hagemann, T., Muench, S., Hauffman, G., Gohy, J., Hager, M. D., & Schubert, U. S. (2016) · Advanced Materials · doi:10.1002/adma.201505000 · Cited by 252
Environmental assessment of vanadium redox and lead-acid batteries for stationary energy storage
Rydh, C. J. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00249-3 · Cited by 226
Rechargeable hybrid aqueous batteries
Yan, J., Wang, J., Liu, H., Bakenov, Z., Gosselink, D., & Chen, P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.063 · Cited by 226
Self-citationStretchable Silver‐Zinc Batteries Based on Embedded Nanowire Elastic Conductors
Yan, C., Wang, X., Cui, M., Wang, J., Kang, W., Foo, C. Y., & Lee, P. S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301396 · Cited by 161
Zhao, H., Hu, C., Cheng, H., Fang, J., Xie, Y., Fang, W., Doan, T. N. L., Hoang, T. K. A., Xu, J. Q., & Chen, P. (2016) · Scientific Reports · doi:10.1038/srep25809 · Cited by 133
Self-citationApplication of nonionic surfactant as a corrosion inhibitor for zinc in alkaline battery solution
Deyab, M. A. M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.040 · Cited by 116
Characterization and optimization of a printed, primary silver–zinc battery
Braam, K., Volkman, S. K., & Subramanian, V. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.076 · Cited by 111
Ghavami, R. K., Rafiei, Z., & Tabatabaei, S. M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.084 · Cited by 110
Nayana, K. O., & Venkatesha, T. V. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.11.021 · Cited by 49
Experimental and mathematical studies on cycle life of rechargeable hybrid aqueous batteries
Han, Z., Askhatova, D., Doan, T. N. L., Hoang, T. K. A., & Chen, P. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.109 · Cited by 11
Self-citation
Cited by
Reversible epitaxial electrodeposition of metals in battery anodes
Zheng, J., Zhao, Q., Tang, T., Yin, J., Quilty, C. D., Renderos, G. D., Liu, X., Deng, Y., Wang, L., Bock, D. C., et al. (2019) · Science · doi:10.1126/science.aax6873 · Cited by 1,877
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Du, W., Ang, E. H., Yang, Y., Zhang, Y., Ye, M., & Li, C. C. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02079f · Cited by 1,101
Surface‐Preferred Crystal Plane for a Stable and Reversible Zinc Anode
Zhou, M., Guo, S., Li, J., Luo, X., Liu, Z., Zhang, T., Cao, X., Long, M., Lu, B., Pan, A., et al. (2021) · Advanced Materials · doi:10.1002/adma.202100187 · Cited by 1,044
Zinc-ion batteries: Materials, mechanisms, and applications
Ming, J., Guo, J., Xia, C., Wang, W., & Alshareef, H. N. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.10.002 · Cited by 1,003
Metadata
- Authors
- Sun, K. E. K., Hoang, T. K. A., Doan, T. N. L., Yu, Y., Zhu, X., Tian, Y., & Chen, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-08
- Volume
- 9
- Issue
- 11
- Pages
- 9681-9687
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2594382820
- Cited by
- 550
- References
- 23
- FWCI
- 19.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.