Inkjet-Printed Photodetector Arrays Based on Hybrid Perovskite CH3NH3PbI3 Microwires
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Hybrid perovskite CH 3 NH 3 PbI 3 has attracted extensive research interests in optoelectronic devices in recent years. Herein an inkjet printing method has been employed to deposit a perovskite CH 3 NH 3 PbI 3 layer. By choosing the proper solvent and controlling the crystal growth rate, hybrid perovskite CH 3 NH 3 PbI 3 nanowires, microwires, a network, and islands were synthesized by means of inkjet printing. Electrode–gap–electrode lateral-structured photodetectors were fabricated with these different crystals, of which a hybrid perovskite microwire-based photodetector would balance the uniformity and low defects to obtain a switching ratio of 16000%, responsivity of 1.2 A/W, and normalized detectivity of 2.39 × 10 12 Jones at a light power density of 0.1 mW/cm 2 . Furthermore, the hybrid perovskite microwire-based photodetector arrays were fabricated and applied in an imaging sensor, from which the clear mapping of the light source signal was successfully obtained. This work paves the way for the realization of low-cost, solution-processed, and high-performance hybrid perovskite-based photodetector arrays.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ambipolar solution-processed hybrid perovskite phototransistors
Li, F., Ma, C., Wang, H., Hu, W., Yu, W., Sheikh, A. D., & Wu, T. (2015) · Nature Communications · doi:10.1038/ncomms9238 · Cited by 629
Self-citationDeng, W., Zhang, X., Huang, L., Xu, X., Wang, L., Wang, J., Shang, Q., Lee, S., & Jie, J. (2016) · Advanced Materials · doi:10.1002/adma.201505126 · Cited by 432
Structured Organic–Inorganic Perovskite toward a Distributed Feedback Laser
Saliba, M., Wood, S. M., Patel, J. B., Nayak, P. K., Huang, J., Alexander‐Webber, J. A., Wenger, B., Stranks, S. D., Hörantner, M. T., Wang, J. T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201502608 · Cited by 297
Cited by
Perovskite-based photodetectors: materials and devices
Wang, H., & Kim, D. H. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00896h · Cited by 1,005
Recent progress on highly sensitive perovskite photodetectors
Miao, J., & Zhang, F. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc06089d · Cited by 440
Halide Perovskites: A New Era of Solution‐Processed Electronics
Younis, A., Lin, C., Guan, X., Shahrokhi, S., Huang, C., Wang, Y., He, T., Singh, S., Hu, L., Retamal, J. R. D., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005000 · Cited by 282
Recent Advances in Perovskite Photodetectors for Image Sensing
Li, L., Ye, S., Qu, J., Zhou, F., Song, J., & Shen, G. (2021) · Small · doi:10.1002/smll.202005606 · Cited by 235
Emerging New-Generation Photodetectors Based on Low-Dimensional Halide Perovskites
Wang, Y., Song, L., Chen, Y., & Huang, W. (2020) · ACS Photonics · doi:10.1021/acsphotonics.9b01233 · Cited by 156
Metadata
- Authors
- Liu, Y., Li, F., Perumal Veeramalai, C., Chen, W., Guo, T., Wu, C., & Kim, T. W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-27
- Volume
- 9
- Issue
- 13
- Pages
- 11662-11668
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2602061885
- Cited by
- 100
- References
- 3
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Inkjet-Printed Photodetector Arrays Based on Hybrid Perovskite CH3NH3PbI3 Microwires. https://app.cochat.ai/papers/10.1021/acsami.7b01379
- The paper
- Liu, Y., Li, F., Perumal Veeramalai, C., Chen, W., Guo, T., Wu, C., & Kim, T. W. (2017). Inkjet-Printed Photodetector Arrays Based on Hybrid Perovskite CH3NH3PbI3 Microwires. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b01379
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.