The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Two-Dimensional CH3NH3PbI3 Perovskite Nanosheets for Ultrafast Pulsed Fiber Lasers
Abstract
Even though the nonlinear optical effects of solution processed organic-inorganic perovskite films have been studied, the nonlinear optical properties in two-dimensional (2D) perovskites, especially their applications for ultrafast photonics, are largely unexplored. In comparison to bulk perovskite films, 2D perovskite nanosheets with small thicknesses of a few unit cells are more suitable for investigating the intrinsic nonlinear optical properties because bulk recombination of photocarriers and the nonlinear scattering are relatively small. In this research, we systematically investigated the nonlinear optical properties of 2D perovskite nanosheets derived from a combined solution process and vapor phase conversion method. It was found that 2D perovskite nanosheets have stronger saturable absorption properties with large modulation depth and very low saturation intensity compared with those of bulk perovskite films. Using an all dry transfer method, we constructed a new type of saturable absorber device based on single piece 2D perovskite nanosheet. Stable soliton state mode-locking was achieved, and ultrafast picosecond pulses were generated at 1064 nm. This work is likely to pave the way for ultrafast photonic and optoelectronic applications based on 2D perovskites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sensitive measurement of optical nonlinearities using a single beam
Sheik-Bahae, M., Said, A. A., Wei, T.-H., Hagan, D. J., & Van Stryland, E. W. (1990) · IEEE Journal of Quantum Electronics · doi:10.1109/3.53394 · Cited by 9,053
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Self-citationLow-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Zhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Atomically thin two-dimensional organic-inorganic hybrid perovskites
Dou, L., Wong, A. B., Yu, Y., Lai, M., Kornienko, N., Eaton, S. W., Fu, A., Bischak, C. G., Ma, J., Ding, T., et al. (2015) · Science · doi:10.1126/science.aac7660 · Cited by 1,372
Cited by
Low‐Dimensional Metal Halide Perovskite Photodetectors
Wang, H., Li, S., Liu, X., Shi, Z., Fang, X., & He, J. (2021) · Advanced Materials · doi:10.1002/adma.202003309 · Cited by 574
Self-citationZhang, L., Yang, Z., Gong, T., Pan, R., Wang, H., Guo, Z., Zhang, H., & Fu, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01999b · Cited by 406
Self-citation2D Material Based Synaptic Devices for Neuromorphic Computing
Cao, G., Meng, P., Chen, J., Liu, H., Bian, R., Zhu, C., Liu, F., & Liu, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005443 · Cited by 382
Halide Perovskites for Nonlinear Optics
Xu, J., Li, X., Xiong, J., Yuan, C., Semin, S., Rasing, T., & Bu, X. (2020) · Advanced Materials · doi:10.1002/adma.201806736 · Cited by 355
Ultrafast fiber lasers mode-locked by two-dimensional materials: review and prospect
Jiang, T., Yin, K., Wang, C., You, J., Ouyang, H., Miao, R., Zhang, C., Wei, K., Li, H., Chen, H., et al. (2020) · Photonics Research · doi:10.1364/prj.8.000078 · Cited by 319
Self-citation2D Perovskite Sr2Nb3O10 for High‐Performance UV Photodetectors
Li, S., Zhang, Y., Yang, W., Liu, H., & Fang, X. (2020) · Advanced Materials · doi:10.1002/adma.201905443 · Cited by 309
Self-citationEmerging 2D materials beyond graphene for ultrashort pulse generation in fiber lasers
He, J., Tao, L., Zhang, H., Zhou, B., & Li, J. (2019) · Nanoscale · doi:10.1039/c8nr09368g · Cited by 282
Self-citationMicro‐ and Nanostructured Lead Halide Perovskites: From Materials to Integrations and Devices
Wang, K., Xing, G., Song, Q., & Xiao, S. (2021) · Advanced Materials · doi:10.1002/adma.202000306 · Cited by 126
Metadata
- Authors
- Li, P., Chen, Y., Yang, T., Wang, Z., Lin, H., Xu, Y., Li, L., Mu, H., Shivananju, B. N., Zhang, Y., Zhang, Q., Pan, A., Li, S., Tang, D., Jia, B., Zhang, H., & Bao, Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-29
- Volume
- 9
- Issue
- 14
- Pages
- 12759-12765
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2600976738
- Cited by
- 347
- References
- 29
- FWCI
- 21.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.