The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Defect Dominated Charge Transport and Fermi Level Pinning in MoS2/Metal Contacts
Open accessAbstract
Abstract Understanding the electronic contact between molybdenum disulfide (MoS2) and metal electrodes is vital for the realization of future MoS2-based electronic devices. Natural MoS2 has the drawback of a high density of both metal and sulfur defects and impurities. We present evidence that subsurface metal-like defects with a density of ∼1011 cm–2 induce negative ionization of the outermost S atom complex. We investigate with high-spatial-resolution surface characterization techniques the effect of these defects on the local conductance of MoS2. Using metal nanocontacts (contact area < 6 nm2), we find that subsurface metal-like defects (and not S-vacancies) drastically decrease the metal/MoS2 Schottky barrier height as compared to that in the pristine regions. The magnitude of this decrease depends on the contact metal. The decrease of the Schottky barrier height is attributed to strong Fermi level pinning at the defects. Indeed, this is demonstrated in the measured pinning factor, which is equal to ∼0.1 at defect locations and ∼0.3 at pristine regions. Our findings are in good agreement with the theoretically predicted values. These defects provide low-resistance conduction paths in MoS2-based nanodevices and will play a prominent role as the device junction contact area decreases in size.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Cited by
Contact engineering for 2D materials and devices
Schulman, D. S., Arnold, A. J., & Das, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00828g · Cited by 865
Pető, J., Ollár, T., Vancsó, P., Popov, Z. I., Magda, G. Z., Dobrik, G., Hwang, C., Sorokin, P. B., & Tapasztó, L. (2018) · Nature Chemistry · doi:10.1038/s41557-018-0136-2 · Cited by 422
Fermi Level Pinning Dependent 2D Semiconductor Devices: Challenges and Prospects
Liu, X., Choi, M. S., Hwang, E., Yoo, W. J., & Sun, J. (2022) · Advanced Materials · doi:10.1002/adma.202108425 · Cited by 388
Defect engineering in photocatalysis: formation, chemistry, optoelectronics, and interface studies
Maarisetty, D., & Baral, S. S. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04297h · Cited by 314
Metadata
- Authors
- Bampoulis, P., van Bremen, R., Yao, Q., Poelsema, B., Zandvliet, H. J. W., & Sotthewes, K.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-24
- Volume
- 9
- Issue
- 22
- Pages
- 19278-19286
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2616420111
- Cited by
- 249
- References
- 2
- FWCI
- 10.16
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.