The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Enhanced Energy-Storage Density and High Efficiency of Lead-Free CaTiO3–BiScO3 Linear Dielectric Ceramics
Abstract
A novel lead-free (1 – x )CaTiO 3 - x BiScO 3 linear dielectric ceramic with enhanced energy-storage density was fabricated. With the composition of BiScO 3 increasing, the dielectric constant of (1 – x )CaTiO 3 - x BiScO 3 ceramics first increased and then decreased after the composition x > 0.1, while the dielectric loss decreased first and increased. For the composition x = 0.1, the polarization was increased into 12.36 μC/cm 2, 4.6 times higher than that of the pure CaTiO 3 . The energy density of 0.9CaTiO 3 -0.1BiScO 3 ceramic was 1.55 J/cm 3 with the energy-storage efficiency of 90.4% at the breakdown strength of 270 kV/cm, and the power density was 1.79 MW/cm 3 . Comparison with other lead-free dielectric ceramics confirmed the superior potential of CaTiO 3 –BiScO 3 ceramics for the design of ceramics capacitors for energy-storage applications. First-principles calculations revealed that Sc subsitution of Ti-site induced the atomic displacement of Ti ions in the whole crystal lattice, and lattice expansion was caused by variation of the bond angles and lenghths. Strong hybridization between O 2p and Ti 3d was observed in both valence band and conduction band; the hybridization between O 2p and Sc 3d at high conduction band was found to enlarge the band gap, and the static dielectric tensors were increased, which was the essential for the enhancement of polarization and dielectric properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Cited by
Yang, Z., Du, H., Jin, L., & Poelman, D. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04504k · Cited by 672
Zhou, M., Liang, R., Zhou, Z., & Dong, X. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03003k · Cited by 535
Phase transitions in bismuth-modified silver niobate ceramics for high power energy storage
Tian, Y., Jin, L., Zhang, H., Xu, Z., Wei, X., Viola, G., Abrahams, I., & Yan, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03821f · Cited by 385
Sun, J., Luo, B., & Li, H. (2022) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202100191 · Cited by 340
Self-citationProgress and outlook on lead-free ceramics for energy storage applications
Yan, F., Qian, J., Wang, S., & Zhai, J. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109394 · Cited by 289
Metadata
- Authors
- Luo, B., Wang, X., Tian, E., Song, H., Wang, H., & Li, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-31
- Volume
- 9
- Issue
- 23
- Pages
- 19963-19972
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2619372321
- Cited by
- 216
- References
- 2
- FWCI
- 7.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.