The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Extending the Use of Highly Porous and Functionalized MOFs to Th(IV) Capture
Abstract
Thorium separation has recently become a hot topic because of the potential application of thorium as a future nuclear fuel, while metal-organic framework (MOF) materials have received much attention in the separation field due to their unique properties. Herein, a highly porous and stable MOF, UiO-66, and its carboxyl derivatives (UiO-66-COOH and UiO-66-(COOH) 2 ) were synthesized and explored for the first time for Th(IV) capture from a weak acidic solution. Although the introduction of carboxyl groups into UiO-66 leads to an obvious decrease in the surface area and pore volume, the adsorbability toward Th(IV) is greatly enhanced. At pH = 3.0, the saturated sorption capacity for Th(IV) into UiO-66-(COOH) 2 reached 350 mg/g, representing one of the largest values for Th(IV) capture by solid extraction. Moreover, the functionalized MOFs show fast sorption kinetics and desirable selectivity toward Th(IV) over a range of competing metal ions. A possible mechanism for the selective recognition of Th(IV) by these MOFs was explored on the basis of extended X-ray absorption fine structure and Fourier transform infrared analysis. It is concluded that UiO-66-COOH and UiO-66-(COOH) 2 sorb Th(IV) through the coordination of carboxyl anions in the pores of the MOFs, whereas in the case of UiO-66, both the precipitation and the exchange with the organic solvent contribute to the Th(IV) uptake. This study contributes to the assessment of the feasibility of MOFs applied in actinides separation and better understanding of actinides sorption behavior in this kind of hybrid porous solid materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal-organic framework materials as catalysts
Lee, J., Farha, O. K., Roberts, J., Scheidt, K. A., Nguyen, S. T., & Hupp, J. T. (2009) · Chemical Society Reviews · doi:10.1039/b807080f · Cited by 7,969
Zhang, G., Wei, G., Liu, Z., Oliver, S. R. J., & Fei, H. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02511 · Cited by 217
Cited by
Li, J., Wang, X., Zhao, G., Chen, C., Chai, Z., Alsaedi, A., Hayat, T., & Wang, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00543a · Cited by 1,856
Self-citationUiO-66 metal–organic frameworks in water treatment: A critical review
Ahmadijokani, F., Molavi, H., Rezakazemi, M., Tajahmadi, S., Bahi, A., Ko, F., Aminabhavi, T. M., Li, J.-R., & Arjmand, M. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100904 · Cited by 559
Adsorption of iodine in metal–organic framework materials
Zhang, X., Maddock, J., Nenoff, T. M., Denecke, M. A., Yang, S., & Schröder, M. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01192d · Cited by 557
Feng, M., Zhang, P., Zhou, H.-C., & Sharma, V. K. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.114 · Cited by 493
Synthesis of novel nanomaterials and their application in efficient removal of radionuclides
Wang, X., Chen, L., Wang, L., Fan, Q., Pan, D., Li, J., Chi, F., Xie, Y., Yu, S., Xiao, C., et al. (2019) · Science China Chemistry · doi:10.1007/s11426-019-9492-4 · Cited by 365
Self-citationAdsorption of diclofenac from aqueous solution using UiO-66-type metal-organic frameworks
Zhuang, S., Cheng, R., & Wang, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.150 · Cited by 325
Extraction and separation of heavy rare earth elements: A review
Liu, T., & Chen, J. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119263 · Cited by 304
Metadata
- Authors
- Zhang, N., Yuan, L.-Y., Guo, W.-L., Luo, S.-Z., Chai, Z.-F., & Shi, W.-Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-19
- Volume
- 9
- Issue
- 30
- Pages
- 25216-25224
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2734544997
- Cited by
- 240
- References
- 2
- FWCI
- 7.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.