The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Stabilizing the Ag Electrode and Reducing J–V Hysteresis through Suppression of Iodide Migration in Perovskite Solar Cells
Abstract
Abstract Hysteresis and stability issues in perovskite solar cell (PSCs) hinder their commercialization. Here, we report an effective and reproducible approach for enhancing the stability of and suppressing the hysteresis in PSCs by incorporating a small quantity of two-dimensional (2D) PEA2PbI4 [PEA = C6H5(CH2)2NH3] in three-dimensional (3D) MAPbI3 [MA = CH3NH3 ] [denoted as (PEA2PbI4)x(MAPbI3)], where the perovskite films were fabricated by the Lewis acid–base adduct method. A nanolaminate structure comprising layered MAPbI3 nanobricks was created in the presence of 2D PEA2PbI4. For x = 0.017, a power conversion efficiency (PCE) of as high as 19.8% was achieved, which was comparable to the 20.0% PCE of a MAPbI3-based cell. Density functional theory (DFT) calculations confirmed that iodide migration was suppressed in the presence of the 2D perovskite as a result of a higher activation energy, which was responsible for the significant reduction in hysteresis and the improved chemical stability against a Ag electrode as compared to the corresponding characteristics of its pristine MAPbI3 counterpart. An unencapsulated MAPbI3-based device retained less than 55% of its initial PCE in a 35-day aging test, whereas a (PEA2PbI4)0.017(MAPbI3)-based device without encapsulation exhibited a promising long-term stability, retaining over 90% of its initial PCE after 42 days.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Self-citationSynthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Rethinking the A cation in halide perovskites
Lee, J.-W., Tan, S., Seok, S. I., Yang, Y., & Park, N.-G. (2022) · Science · doi:10.1126/science.abj1186 · Cited by 557
Self-citation
Metadata
- Authors
- Chen, J., Lee, D., & Park, N.-G.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-06
- Volume
- 9
- Issue
- 41
- Pages
- 36338-36349
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2759190741
- Cited by
- 173
- References
- 1
- FWCI
- 5.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.