The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Enhanced Endurance Organolead Halide Perovskite Resistive Switching Memories Operable under an Extremely Low Bending Radius
Abstract
It was demonstrated that organolead halide perovskites (OHPs) show a resistive switching behavior with an ultralow electric field of a few kilovolts per centimeter. However, a slow switching time and relatively short endurance remain major obstacles for the realization of the next-generation memory. Here, we report a performance-enhanced OHP resistive switching device. To fabricate topologically and electronically improved OHP thin films, we added hydroiodic acid solution (for an additive) in the precursor solution of the OHP. With drastically improved morphology such as small grain size, low peak-to-valley depth, and precise thickness, the OHP thin films showed an excellent performance as insulating layers in Ag/CH 3 NH 3 PbI 3 /Pt cells, with an endurance of over 10 3 cycles, a high on/off ratio of 10 6, and an operation speed of 640 μs and without electroforming. We suggest plausible resistive switching and conduction mechanisms with current–voltage characteristics measured at various temperatures and with different top electrodes and device structures. Beyond the extended endurance, highly flexible resistive switching devices with a minimum bending radius of 5 mm create opportunities for use in flexible and wearable electronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Cited by
Flexible Neuromorphic Electronics for Computing, Soft Robotics, and Neuroprosthetics
Park, H., Lee, Y., Kim, N., Seo, D., Go, G., & Lee, T. (2020) · Advanced Materials · doi:10.1002/adma.201903558 · Cited by 533
Organic and hybrid resistive switching materials and devices
Gao, S., Yi, X., Shang, J., Liu, G., & Li, R.-W. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00614h · Cited by 402
Halide Perovskites: A New Era of Solution‐Processed Electronics
Younis, A., Lin, C., Guan, X., Shahrokhi, S., Huang, C., Wang, Y., He, T., Singh, S., Hu, L., Retamal, J. R. D., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005000 · Cited by 282
Recent Advances in Memristive Materials for Artificial Synapses
Kim, S. G., Han, J. S., Kim, H., Kim, S. Y., & Jang, H. W. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800457 · Cited by 272
Self-citationNanostructured perovskites for nonvolatile memory devices
Liu, Q., Gao, S., Xu, L., Yue, W., Zhang, C., Kan, H., Li, Y., & Shen, G. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00886b · Cited by 163
Metadata
- Authors
- Choi, J., Le, Q. V., Hong, K., Moon, C. W., Han, J. S., Kwon, K. C., Cha, P.-R., Kwon, Y., Kim, S. Y., & Jang, H. W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-08-29
- Volume
- 9
- Issue
- 36
- Pages
- 30764-30771
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2749022636
- Cited by
- 164
- References
- 2
- FWCI
- 7.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced Endurance Organolead Halide Perovskite Resistive Switching Memories Operable under an Extremely Low Bending Radius. https://app.cochat.ai/papers/10.1021/acsami.7b08197
- The paper
- Choi, J., Le, Q. V., Hong, K., Moon, C. W., Han, J. S., Kwon, K. C., Cha, P.-R., Kwon, Y., Kim, S. Y., & Jang, H. W. (2017). Enhanced Endurance Organolead Halide Perovskite Resistive Switching Memories Operable under an Extremely Low Bending Radius. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b08197
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.