The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Boosting Two-Dimensional MoS2/CsPbBr3 Photodetectors via Enhanced Light Absorbance and Interfacial Carrier Separation
Abstract
Transition metal dichalcogenides (TMDs) are promising candidates for flexible optoelectronic devices because of their special structures and excellent properties, but the low optical absorption of the ultrathin layers greatly limits the generation of photocarriers and restricts the performance. Here, we integrate all-inorganic perovskite CsPbBr 3 nanosheets with MoS 2 atomic layers and take the advantage of the large absorption coefficient and high quantum efficiency of the perovskites, to achieve excellent performance of the TMD-based photodetectors. Significantly, the interfacial charge transfer from the CsPbBr 3 to the MoS 2 layer has been evidenced by the observed photoluminescence quenching and shortened decay time of the hybrid MoS 2 /CsPbBr 3 . Resultantly, such a hybrid MoS 2 /CsPbBr 3 photodetector exhibits a high photoresponsivity of 4.4 A/W, an external quantum efficiency of 302%, and a detectivity of 2.5 × 10 10 Jones because of the high efficient photoexcited carrier separation at the interface of MoS 2 and CsPbBr 3 . The photoresponsivity of this hybrid device presents an improvement of 3 orders of magnitude compared with that of a MoS 2 device without CsPbBr 3 . The response time of the device is also shortened from 65.2 to 0.72 ms after coupling with MoS 2 layers. The combination of the all-inorganic perovskite layer with high photon absorption and the carrier transport TMD layer may pave the way for novel high-performance optoelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lead iodide perovskite light-emitting field-effect transistor
Chin, X. Y., Cortecchia, D., Yin, J., Bruno, A., & Soci, C. (2015) · Nature Communications · doi:10.1038/ncomms8383 · Cited by 767
Cited by
Low‐Dimensional Metal Halide Perovskite Photodetectors
Wang, H., Li, S., Liu, X., Shi, Z., Fang, X., & He, J. (2021) · Advanced Materials · doi:10.1002/adma.202003309 · Cited by 574
Self-citationControlled Synthesis of 2D Palladium Diselenide for Sensitive Photodetector Applications
Zeng, L., Wu, D., Lin, S., Xie, C., Yuan, H., Lu, W., Lau, S. P., Chai, Y., Luo, L., Li, Z., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806878 · Cited by 506
Zeng, L., Chen, Q., Zhang, Z., Wu, D., Yuan, H., Li, Y., Qarony, W., Lau, S. P., Luo, L., & Tsang, Y. H. (2019) · Advanced Science · doi:10.1002/advs.201901134 · Cited by 465
Pan, A., Ma, X., Huang, S., Wu, Y., Jia, M., Shi, Y., Liu, Y., Wangyang, P., He, L., & Liu, Y. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b02605 · Cited by 381
Emerging New-Generation Photodetectors Based on Low-Dimensional Halide Perovskites
Wang, Y., Song, L., Chen, Y., & Huang, W. (2020) · ACS Photonics · doi:10.1021/acsphotonics.9b01233 · Cited by 156
Self-citation
Metadata
- Authors
- Song, X., Liu, X., Yu, D., Huo, C., Ji, J., Li, X., Zhang, S., Zou, Y., Zhu, G., Wang, Y., Wu, M., Xie, A., & Zeng, H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-01-09
- Volume
- 10
- Issue
- 3
- Pages
- 2801-2809
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2780404469
- Cited by
- 276
- References
- 1
- FWCI
- 10.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Boosting Two-Dimensional MoS2/CsPbBr3 Photodetectors via Enhanced Light Absorbance and Interfacial Carrier Separation. https://app.cochat.ai/papers/10.1021/acsami.7b14745
- The paper
- Song, X., Liu, X., Yu, D., Huo, C., Ji, J., Li, X., Zhang, S., Zou, Y., Zhu, G., Wang, Y., Wu, M., Xie, A., & Zeng, H. (2018). Boosting Two-Dimensional MoS2/CsPbBr3 Photodetectors via Enhanced Light Absorbance and Interfacial Carrier Separation. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b14745
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.