The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Porous ZnO-Coated Co3O4 Nanorod as a High-Energy-Density Supercapacitor Material
Abstract
Co 3 O 4 with a high theoretical capacitance has been widely recognized as a promising electrode material for supercapacitor, but its poor electrical conductivity and stability limit its practical applications. Here, we developed an effective synthetic route to synthesize one-dimensional (1D) porous ZnO/Co 3 O 4 heterojunction composites. Benefiting from the heterostructure to promote the charge transfer and protect Co 3 O 4 from corrosion and the 1D porous structure to improve ion diffusion and prevent structural collapse in charge and discharge process, the as-prepared ZnO/Co 3 O 4 composites exhibited an excellent capacitive performance and good cycling stability. The specific capacitance of the ZnO/Co 3 O 4 -450 (1135 F g –1 at 1 A g –1 ) was 1.4 times higher than that of Co 3 O 4 (814 F g –1 ), and the high-rate performance for ZnO/Co 3 O 4 -450 was 4.9 times better than that of Co 3 O 4 . Also, approximately 83% of its specific capacitance was retained after 5000 cycles at 10 A g –1 . Most importantly, the as-fabricated asymmetric supercapacitor, with a ZnO/Co 3 O 4 -450 positive electrode and an activated carbon negative electrode, delivered a prominent energy density of 47.7 W h kg –1 and a high power density of 7500 W kg –1 . Thus, the ZnO/Co 3 O 4 composites could serve as a high-activity material for supercapacitor and the preparation method also offers an attractive strategy to enhance the capacitive performance of Co 3 O 4 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered porous materials for emerging applications
Davis, M. E. (2002) · Nature · doi:10.1038/nature00785 · Cited by 5,308
Cited by
Emerging of Heterostructure Materials in Energy Storage: A Review
Li, Y., Zhang, J., Chen, Q., Xia, X., & Chen, M. (2021) · Advanced Materials · doi:10.1002/adma.202100855 · Cited by 794
Shah, S. S., Niaz, F., Ehsan, M. A., Das, H. T., Younas, M., Khan, A. S., Rahman, H. U., Nayem, S. M. A., Oyama, M., & Aziz, M. A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110152 · Cited by 317
Hierarchically porous biochar for supercapacitor and electrochemical H2O2 production
Gao, M., Wang, W.-K., Zheng, Y.-M., Zhao, Q.-B., & Yu, H.-Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126171 · Cited by 109
Self-citation
Metadata
- Authors
- Gao, M., Wang, W.-K., Rong, Q., Jiang, J., Zhang, Y.-J., & Yu, H.-Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-20
- Volume
- 10
- Issue
- 27
- Pages
- 23163-23173
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2808984229
- Cited by
- 240
- References
- 1
- FWCI
- 7.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Porous ZnO-Coated Co3O4 Nanorod as a High-Energy-Density Supercapacitor Material. https://app.cochat.ai/papers/10.1021/acsami.8b07082
- The paper
- Gao, M., Wang, W.-K., Rong, Q., Jiang, J., Zhang, Y.-J., & Yu, H.-Q. (2018). Porous ZnO-Coated Co3O4 Nanorod as a High-Energy-Density Supercapacitor Material. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.8b07082
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.