The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fluorinated Carbon Nanotube/Nanofibrillated Cellulose Composite Film with Enhanced Toughness, Superior Thermal Conductivity, and Electrical Insulation
Abstract
Recently, graphene and carbon nanotubes (CNTs) promise considerable application potentials in the highly efficient thermal management of high-power devices because of their superb thermal conductivity (TC). However, the high electrical conductivity hampers their use in some fields where electrical insulating components are always required. Herein, to coordinate the thermal and electrical conductivity of CNT, fluorinated CNT (FCNT) was first used as a thermally conductive filler to prepare composite film with nanofibrillated celluloses (NFCs) via facile vacuum-assisted filtration. The obtained composite film shows a well-organized layered structure of the building blocks along the planar direction. Moreover, the one-dimensional structure of NFCs and the strong interaction of NFCs and FCNTs ensure sufficient connection between FCNT themselves and the reduced interfacial thermal resistance of NFCs/FCNTs, so that efficient heat transfer pathways can be well reserved, leading to simultaneous accessibility of high in-plane TC of 14.1 W m –1 K –1 and favorable electrical insulation property at an FCNT content of 35 wt %. Despite such a high FCNT loading, the strong interaction between NFCs and FCNTs enables the composite film to possess enhanced toughness, reliable mechanical strength, and flexibility. Therefore, we think that these outstanding comprehensive properties guarantee that the prepared composite film has promising applications in heat dissipation of next-generation portable and collapsible electronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Cited by
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Thermally Insulating Nanocellulose‐Based Materials
Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2021) · Advanced Materials · doi:10.1002/adma.202001839 · Cited by 394
Strategies for enhancing thermal conductivity of polymer-based thermal interface materials: a review
Ma, H., Gao, B., Wang, M., Yuan, Z., Shen, J., Zhao, J., & Feng, Y. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05279-x · Cited by 299
Cao, J., Zhou, Z., Song, Q., Chen, K., Su, G., Zhou, T., Zheng, Z., Lu, C., & Zhang, X. (2020) · ACS Nano · doi:10.1021/acsnano.0c01779 · Cited by 279
Metadata
- Authors
- Wang, X., & Wu, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-09-12
- Volume
- 10
- Issue
- 40
- Pages
- 34311-34321
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2892121438
- Cited by
- 191
- References
- 1
- FWCI
- 7.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.